[Open Source] Lucky's Spacebot

[TMichael]

TMichael thanks alot that u did a minor fix but somehow it doesn't bring better results for me.

1. 27/30
2. 22/30
3. 26/30
4. 23/30 (Died on 1minute left)

It never happened to me before that it would die, so it might be a lag spike or something.
Will give it a shoot with 5more tries with 125 tolerance to see how it goes

The tolerance will affect the initial timer recognition, but not the pixel search used to find most targets during a run. Experimenting with different systems here at home, the best solution I've found so far is to adjust video card gamma and contrast incrementally when this happens. Try making it brighter/sharper and see if that does the trick.

Per the deaths, the ship will take a little more damage now with the new attacks, but so far my purple geared ship hasn't finished below about 35%. With the bonus off, it will shield in those spots, so there's that option as well.

Let us know if you are able to get a higher success rate.

[Tum]

Anyone having problems with Space MIssion Aeten ?

THe problem i have is after the mission. The mission ends, win or lose, the bot returns to my ship, but then starts to target nothing.

It goes from targetting the back of my characters head, to targetting a section on the bottom left of the screen.


Actually looking at where its targetting , it maybe trying to click the PLAY button from the character selection screen !

Is anyone else having this problem ? Only seem to be doing it on mission AETEN DEFENSE

Is there a way around it please ?

[phagotron]

TMichael thanks alot that u did a minor fix but somehow it doesn't bring better results for me.

1. 27/30
2. 22/30
3. 26/30
4. 23/30 (Died on 1minute left)

It never happened to me before that it would die, so it might be a lag spike or something.
Will give it a shoot with 5more tries with 125 tolerance to see how it goes

If your ship dies at 1min left you have try mission bonus enabled. Compute yourself if mission+bonus at 80% helps you more than mission only at 100%.

[phagotron]

Anyone having problems with Space MIssion Aeten ?

THe problem i have is after the mission. The mission ends, win or lose, the bot returns to my ship, but then starts to target nothing.

It goes from targetting the back of my characters head, to targetting a section on the bottom left of the screen.


Actually looking at where its targetting , it maybe trying to click the PLAY button from the character selection screen !

Is anyone else having this problem ? Only seem to be doing it on mission AETEN DEFENSE

Is there a way around it please ?

Try increasing tolerance by 2 or 3 for Aetan. Looks as if the tolerance reset for a mission specific tolerance got lost in one of the code reorganizations.I'll check for that tomorrow.

[Tum]

Try increasing tolerance by 2 or 3 for Aetan. Looks as if the tolerance reset for a mission specific tolerance got lost in one of the code reorganizations.I'll check for that tomorrow.

k thanks, just trying at the minute with tolerance set at 110, it usually is 93

will try a 2 or 3 increase after this run.

EDIT: 110 tolerance worked fine. Just retrying now with a tollerance of 95

[vapor311]

TMichael i'm running win7 64bit (86x Program tho).
I got 6850 ati radeon gfx going to try to dll cataclyst if that will help any. (not sure if i can set the brightness there <.<)
What it seems to be a problem for me it is, that it starts shooting at ships but sometimes it let them burn and switch to other and doesn't destroy them.
I will try without HD mode even tho i'm on 37" HD tv atm.

Turn the on target timer up during the mission see if this helps, F7

[phagotron]

TMichael i'm running win7 64bit (86x Program tho).
I got 6850 ati radeon gfx going to try to dll cataclyst if that will help any. (not sure if i can set the brightness there <.<)
What it seems to be a problem for me it is, that it starts shooting at ships but sometimes it let them burn and switch to other and doesn't destroy them.
I will try without HD mode even tho i'm on 37" HD tv atm.

HD mode currently doesnt affect mission success. More specific, HD setting currently wont do much more than blocking the mission buttons if it isnt able to recorgnize the map icon on your screen. This way testing tolerance becomes quite easy, just set it to 90 and then increase by 1 until Mission control unblocks. (The bot window must not cover the client window but guess thats usually not the case on HD )

[Tum]

Try increasing tolerance by 2 or 3 for Aetan. Looks as if the tolerance reset for a mission specific tolerance got lost in one of the code reorganizations.I'll check for that tomorrow.

Found the best lowest value, it was a increase in tolerance of 8

So i just changed the line in the aetam mission script from "$img_tolerance = $img_tolerance - 12" to "$img_tolerance = $img_tolerance - 4" and then recompiled the main script.

Works totally fine now Thanks

[Jevnaker]

now its usually only trough the daily system only it exits missions
there is one that it leaves at the start, when i use the one mission grind part of the bot. that is zosha advance.it leaves almost as soon as the first republic ship comes into view at the start. have tried to changing around the image tolerance.

kalee fortification works fine except doesn't acept the reward when back on the ship.

Lucky's Spacebot x64 v5.35psx (preview R29)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:11 GB, used:28 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Zosha Advance
Win / Loss 0 / 2

[TMichael]

vapor311 tried with 55 (it was 49 before) and it done even worse job <.<
phagotron i'm having issues with not completing full bonus on a mission not the mission buttons :P but thanks for the info! ^_^

Hmmm...........

Given all the differences in color from system to system, I'm going to try something new which might help you and others. In the Options tab, I'll add an input field for Game Tolerance (or something like that) which will have a possible range of -5 to +15. This number will be added to or subtracted from the individual pixel searches in game (with constraints of course).


Pros:

- Can help the bot more effectively find targets
- Can be added to missions time permitting - missions not updated will not be affected

Cons:

- Systems with large color variances from the developer system might only receive minimal improvement


I'll post again once the update is complete, starting with Kalee/Aetan and Makem/Sarapin.

[TMichael]

now its usually only trough the daily system only it exits missions
there is one that it leaves at the start, when i use the one mission grind part of the bot. that is zosha advance.it leaves almost as soon as the first republic ship comes into view at the start. have tried to changing around the image tolerance.


Lucky's Spacebot x64 v5.35psx (preview R29)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:11 GB, used:28 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Zosha Advance
Win / Loss 0 / 2

Try increasing the IMG Tolerance by one or two at a time until it successfully reads the starting timer image. If increasing this number all the way to max doesn't help, then you might try taking your own screenshot images to use in place of the Zosha images provided. Instructions on how to do this are posted earlier in the thread.

[vodelo]

i downloaded 86. now i get autoit error it says Line 8 (file "C:/Users/BLAKE/Desktop/LuckysSpacebot.exe") error: Subscript used with non-Array variable. how do i fix this??

[ChangedDeleted1]

Everytime I begin a space mission, it can't click the proper region in the galaxy; it clicks just right of Hutt Space when I start Jabiim Escort.

Is something set incorrectly?

[TMichael]

i downloaded 86. now i get autoit error it says Line 8 (file "C:/Users/BLAKE/Desktop/LuckysSpacebot.exe") error: Subscript used with non-Array variable. how do i fix this??

I just checked and ran the download, and everything seems fine from my end. Are you running the .exe directly or clicking the .au3 file? Sometimes the .au3 will produce that error if run by itself; the error originates from somewhere in ImageSearch (from the AutoIt library), and doesn't seem to occur in the .exe.

Everytime I begin a space mission, it can't click the proper region in the galaxy; it clicks just right of Hutt Space when I start Jabiim Escort.

Is something set incorrectly?

Be sure your client is set to Windowed 1024 x 768. The [Resize and Move] button in the Options tab should do this for you automatically as well.

[vodelo]

idk how do i run the exe directly?