Error help w/ images menu

Shout-Out

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Error help w/ images


    World:
    Code:
    /***********************************************************************
    * ArcEmu Configuration File
    * Last edited: 7/18/09
    *
    * Configure ArcEmu's world server below.
    ***********************************************************************
    ***********************************************************************
    * Database Section
    *
    *   Database.Host      - The hostname that the database is located on
    *   Database.Username  - The username used for the mysql connection
    *   Database.Password  - The password used for the mysql connection
    *   Database.Name      - The database name
    *   Database.Port      - Port that MySQL listens on. Usually 3306.
    *   Database.Type      - Client to use. 1 = MySQL
    *   Not supported:     - 2 = PostgreSQL (Partly implemented)
    *   Not Supported:     - 3 = SQLite (unimplemented)
    *******************************************************/
    
    <WorldDatabase Hostname = "localhost" Username = "ascent" Password = "ascent" Name = "world" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "ascent" Password = "ascent" Name = "characters" Port = "3306" Type = "1">
    
    
    /******************************************************
    * Listen Config
    *
    *    Host
    *        This is the address that the server will listen on.
    *        To listen on all addresses, set it to 0.0.0.0
    *        Default: 127.0.0.1 (localhost)
    *
    *    WorldServerPort
    *        This is the port that the world server listens on.
    *        It has to be the same as what is specified in the
    *        realms table in the LogonDatabase.
    *        Default: 8129
    *
    ******************************************************/
    
    <Listen Host = "0.0.0.0"
            WorldServerPort = "8129">
    
    
    /******************************************************
    * Log Level Setup
    *
    *    Console Logging Level
    *        This directive controls how much output the server will
    *        display in it's console. Set to 0 for none, or -1 to disable.
    *        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    *        Default: 3
    *
    *    World server packet logging feature
    *        If this directive is turned on, a file called `world.log`
    *        will be created in the server's directory and all packets
    *        sent and received by clients will be dumped here in bfg
    *        format.
    *        Default: 0
    *
    *    DisableCrashdumpReport
    *        Disables crashdump reports, else if the build has debugging enabled, 
    *        arcemu-world will call ./arcemu-crashreport every time it starts, so 
    *        if there is a core, a crashdump will automatically be reported 
    *        to the tracker at sf.net
    *        Needs gdb and curl
    *        Linux only
    *        Default: 0
    *
    ******************************************************/
    
    <LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">
    
    
    /******************************************************
    * Server Settings
    *
    *    PlayerLimit
    *        This directive controls the amount of sessions that will be
    *        accepted by the server before it starts to add people to 
    *        the server queue.
    *        Default: 100
    *
    *    Motd
    *        This message will be displayed by the server in the chat
    *        box every time any user logs on. Colors can be used in the
    *        standard WoW format.
    *        Default: "No MOTD specified
    *
    *    Send Stats On Join
    *        This directive controls whether the server will send the online player
    *        count to a cilent when it enters the world.
    *
    *    Breathing Setup
    *        If the breathing code is causing problems or you want to run a fun server, you can disable 
    *        water checks by enabling this directive.
    *        Default: 1
    *
    *    Seperate Channels Control
    *        This directive controls whether horde and alliance chats will be seperated across channels.
    *        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
    *        across channels.
    *        Default: 0
    *
    *    Compression Threshold
    *        This directive controls the limit when update packets will be compressed using deflate.
    *        For lower-bandwidth servers use a lower value at the cost of cpu time.
    *        Default: 1000
    *
    *    Queue Update Rate
    *        This directive controls how many milliseconds (ms) between the updates
    *        that the queued players receieve telling them their position in the queue.
    *        Default: 5000 (5 seconds).
    *
    *    Kick AFK Players
    *        Time in milliseconds (ms) that a player will be kicked after they go afk.
    *        Default: 0 (disabled)
    *
    *    Connection Timeout
    *        This directive specifies the amount of seconds that the client will be disconnected
    *        after if no ping packet is sent. It is advised to leave it at the default.
    *        Default: 180
    *
    *    Realm Type
    *        This is the realm type that will be used by the server to handle world pvp.
    *        Default: 0 (pve)(RPPVE)
    *        Other values: 1(pvp)(RPPVP)
    *
    *    AdjustPriority
    *        Set the server to high process priority?
    *        Default: 0
    *
    *    RequireAllSignatures
    *        This directive controls whether the full 10 signatures will be required in order
    *        to turn in a petition. Smaller servers would be better off having it turned off.
    *        Default: off
    *
    *    ShowGMInWhoList
    *        This directive controls whether GM's will be shown in player's who lists or not.
    *        Default: on
    *
    *    MapUnloadTime
    *        This directive controls whether to unload map cells after an idle period of <x> seconds.
    *        Use on smaller servers or servers that are memory-limited. The server without cell unloading
    *        can use over 1.2GB memory with all creatures loaded.
    *        Default: 0
    *
    *    LimitedNames
    *        This directive forces all character names to be a-z and A-Z compliant.
    *        Default: 1
    *
    *    UseAccountData
    *        This directive determines whether the account_data table is used to save custom client data.
    *        May cause buggy behaviour.
    *        Default: 0
    *
    *    AllowPlayerCommands
    *        This directive, if enabled can allow players to use commands with a '0' command group.
    *        Default: 0
    *
    *    EnableLFGJoin
    *        If this is enabled, you can join the LFG channel without using the LFG tool.
    *        Default: 0
    *
    *    TimeZone
    *        Set your local timezone relative to GMT here.
    *        Default: 0
    *
    *    Collision
    *        Enable collision system (LoS checks).
    *        Default: 0
    *     Make sure you have collision.dll in the same folder as arcemu-world!
    *
    *    DisableFearMovement (In Battlegrounds and Arenas only!)
    *        Disable fear movement in arenas & battlegrounds. 
    *        Recommended if you do not have collision enabled!
    *        Default: 0 (off) Not blizzlike
    *
    *    SaveExtendedCharData
    *        Enable saving extended data to characters table.
    *        Recommended for armory type services.
    *        Default: 0 (off)
    *
    ******************************************************/
    
    <Server PlayerLimit = "150"
            Motd = "Welcome to Blades of War.
            -TarridoN"         
            SendStatsOnJoin = "1"
            EnableBreathing = "1"
            SeperateChatChannels = "0"
            CompressionThreshold = "1000"
            QueueUpdateInterval = "5000"
            KickAFKPlayers = "0"
            ConnectionTimeout = "180"
            RealmType = "1"
            AdjustPriority = "1"
            RequireAllSignatures = "0"
            ShowGMInWhoList = "1"
            MapUnloadTime="0"
            LimitedNames="1"
            UseAccountData="0"
            AllowPlayerCommands="1"
            EnableLFGJoin="0"
            TimeZone="0"
            Collision="0"
            DisableFearMovement="0"
            SaveExtendedCharData="0">
    
    /********************************************************
    * Announce Configuration
    *
    *    Tag
    *      Configure what is shown in front of your announces in the [] brackets.
    *      Default: Staff (would give [Staff])
    *
    *    GMAdminTag
    *      Configure whether the <GM> or <Admin> tag is shown in announces.
    *      Default: 0 (disabled)
    *
    *    NameinAnnounce
    *      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
    *      Default: 1 (enabled)
    *
    *    NameinWAnnounce
    *      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
    *      of the message.
    *      Default: 1 (enabled)
    *
    *    ShowInConsole
    *      This controls whether announces are shown in the arcemu-world console or not.
    *      This does not apply for the team-internal GM announce.
    *      Default: 1 (enabled)
    *
    ********************************************************/
    <Announce       Tag = "Blade Staff"
                    GMAdminTag = "1"
                    NameinAnnounce = "1"
                    NameinWAnnounce = "1"
                    ShowInConsole = "1">
    
    /******************************************************
    * Power regeneration multiplier setup
    * 
    *    These directives set up the multiplier in which regen values will be
    *    multiplied by every 2 seconds.
    *    Powers: 
    *        Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
    *    
    *    Reputation:
    *        Kill = Rep gained on kill, Quest = rep gained from quests
    *
    *    Honor:
    *        Honor = multiplier used to calculate honor per-kill.
    *
    *    PvP:
    *        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    *        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
    *
    *    XP:
    *        The xp that a player receives from killing a creature will be multiplied
    *        by this value in order to get his xp gain.
    *
    *    RestXP: 
    *        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    *        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    *        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
    *        Note that resting in a resting area (Zzz) goes 4 times faster.
    *        Default: 1 (bubble every 8 hrs)
    *
    *    Drop(Color):
    *        These values will be multiplied by the drop percentages of the items for creatures
    *        to determine which items to drop. All default to 1.
    *        To allow you better control of drops, separate multipliers have been created for items 
    *        of each quality group. 
    *
    *    DropMoney:
    *        This value will be multiplied by any gold looted and pickpocketed
    *
    *    Save:
    *        Value in milliseconds (ms) that will be between player autosaves.
    *        Default: 300000 (5 minutes)
    * 
    *    SkillChance:
    *        The chance that you have to level up a skill in melee or a profession is multiplied
    *        by this value.
    *        Default: 1
    *
    *    SkillRate:
    *        The amount of "levels" your skill goes up each time you gain a level is multiplied
    *        by this value.
    *
    *    ArenaMultiplier
    *         Every week/day the arena points gained by a player will be multiplied by this value.
    *
    ******************************************************/
    
    <Rates Health="2"
           Power1="2"
           Power2="2"
           Power3="2"
           Power4="2"
           QuestReputation="1"
           KillReputation="3"
           Honor="4"
           PvPTimer="300000"
           ArenaQueueDiff="150"
           Compression="1"
           XP="4"
           QuestXP="3"
           RestXP="1"
           ExploreXP="2"
           DropGrey="1"
           DropWhite="1"
           DropGreen="1"
           DropBlue="1"
           DropPurple="1"
           DropOrange="1"
           DropArtifact="1"
           DropMoney="3"
           Save="300000"
           SkillChance="1"
           SkillRate="2"
           ArenaMultiplier2x="1"
           ArenaMultiplier3x="1"
           ArenaMultiplier5x="1">
    
    
    /******************************************************
    * GM Client Channel
    *
    *   This should be set to 'gm_sync_channel' for the My_Master addon to work.
    *   Default: gm_sync_channel
    *
    ******************************************************/
    
    <GMClient GmClientChannel = "gm_sync_channel">
    
    
    /******************************************************
    * Terrain & Collision Settings
    *
    *   Set the path to the map_xx.bin files and whether unloading should be enabled
    *   for the main world maps here. Unloading the main world maps when they go idle
    *   can save a great amount of memory if the cells aren't being activated/idled
    *   often. Instance/Non-main maps will not be unloaded ever.
    *
    *   Default:
    *      MapPath = "map_xx.bin"
    *      vMapPath = "map_xx.bin"
    *      UnloadMaps = 1
    *
    ******************************************************/
    
    <Terrain MapPath = "map_xx.bin"
             vMapPath = "map_xx.bin"
             UnloadMaps = "1">
    
    
    /******************************************************
    * Log Settings
    * 
    *    Cheaters:
    *        This directive sets up the cheater logging file, if turned on any
    *        cheat / packet exploit / speedhack attempts will be logged here.
    *
    *    GMCommands:
    *        These two directives set up the GM command logging fie. If turned on,
    *        most gm commands will be logged for this file for abuse investigation, etc.
    *
    *    TimeStamp:
    *        Enables timestamps in logs.
    *
    ******************************************************/
    
    <Log Cheaters="0" GMCommands="1" TimeStamp="1">
    
    
    /******************************************************
    * Mail System Setup
    *
    *    These directives control the limits and behaviour of the ingame mail system.
    *    All options must have Mail prefixed before them.
    *   
    *    ReloadDelay                 
    *        Controls the delay at which the database is "refreshed". Use it if you're
    *        inserting mail from an external source, such as a web-based interface.
    *        0 turns it off.
    *        Default: 0
    *
    *    DisablePostageCostsForGM 
    *        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    *        Default: 1
    *
    *    DisablePostageCosts
    *        Disables postage costs for all players.
    *        Default: 0
    *
    *    DisablePostageDelayItems
    *        Disables the one hour wait time when sending mail with items attached.
    *        Default: 1
    *
    *    DisableMessageExpiry
    *        Turns off the 30 day / 3 day after read message expiry time. 
    *        WARNING: A mailbox still cannot show more than 50 items at once
    *        (stupid limitation in client).
    *        Default: 0
    *
    *    EnableInterfactionMail
    *        Removes the faction limitation for sending mail messages. Applies to all players.
    *        Default: 1
    *
    *    EnableInterfactionMailForGM 
    *        Removes the faction limitation for sending mail messages, but only applies
    *        to GM's. EnableInterfactionMail overrides this.
    *        Default: 1
    *   
    ******************************************************/
    
    <Mail ReloadDelay="0"
          DisablePostageCostsForGM="1"
          DisablePostageCosts="1"
          DisablePostageDelayItems="1"
          DisableMessageExpiry="0"
          EnableInterfactionMail="1"
          EnableInterfactionMailForGM="1">
    
    
    /******************************************************
    * Status Dumper Config
    *
    *        These directives set up the status dumper plugin. Filename is an
    *        absolute or relative path to the server binary. Interval is the
    *        time that the stats will be dumped to xml.
    *        Default: stats.xml / 120000 (2 minutes)
    *
    ******************************************************/
    
    <StatDumper FileName = "stats.xml" Interval = "120000">
    
    
    /******************************************************
    * Startup Options
    *
    *    Preloading
    *        This directive controls whether the entire world will be spawned at server
    *        startup or on demand. It is advised to leave it disabled unless you are a
    *        developer doing testing.
    *        Default: off
    *
    *    Background Loot Loading
    *        This directive controls whether loot will be loaded progressively during
    *        startup or in the background in a seperate thread. Turning it on will
    *        result in much faster startup times.
    *        Default: on
    *
    *    Multithreaded Startup
    *        This controls whether the server will spawn multiple worker threads to
    *        use for loading the database and starting the server. Turning it on
    *        increases the speed at which it starts up for each additional cpu in your
    *        computer.
    *        Default: on
    *
    *    Additional Table Binding
    *        You can load static item/creature/etc data into the server using this directive.
    *        This way throughout database updates your custom data can be preserved.
    *        Format: "sourcetable destination table,sourcetable destinationtable"
    *        Example: "myitems items,mynpcs creature_names"
    *        Default: ""
    *
    ******************************************************/
    
    <Startup Preloading = "0"
             BackgroundLootLoading = "1"
             EnableMultithreadedLoading = "1"
             LoadAdditionalTables="">
    
    /******************************************************
    * Flood Protection Setup
    *
    *    Lines
    *        This is the number of "messages" or lines that it will allow before stopping messages from
    *        being sent. This counter is reset every "Seconds" seconds.
    *        Default: 0 (disabled)
    *
    *    Seconds
    *        This is the number of seconds inbetween the Line counter being reset.
    *        Default: 0 (disabled)
    *
    *    SendMessage
    *        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    *        message will be sent upon flood triggering.
    *        Default: 0
    *
    ******************************************************/
    
    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">
    
    
    /******************************************************
    * LogonServer Setup
    *
    *    DisablePings   
    *        This directive controls whether pings will be sent to the logonserver to check
    *        if the connection is still "alive". Expect problems if it is disabled.
    *        Default: 0
    *
    *    RemotePassword
    *        This directive controls the password used to authenticate with the logonserver.
    *        It must be the same between the two configs. If it is not, your server will
    *        not register.
    *
    ******************************************************/
    
    <LogonServer DisablePings = "0"
                 RemotePassword = "ascent">
    
    
    /******************************************************
    * AntiHack Setup
    * Note: Most of this doesn't work as it should.
    *
    *    Teleport   
    *        This directive controls anti-teleport hack checks will be enabled or not.
    *        Default: 1
    *
    *    Speed
    *        This directive controls anti-speed hack checks will be performed on player movement or not.
    *        Default: 1
    *
    *    SpeedThreshold
    *        This directive controls the threshold at which the speedhack detection will trip.
    *        It's (characters' move time of distance - real move time of distance)
    *        Default: -600.0
    *
    *    FallDamage
    *        This directive controls anti-fall damage hack checks will be performed on player movement or not.
    *        Default: 1
    *
    *    Flying
    *        This directive controls whether flight hacks will be performed on players or not.
    *        Default: 1
    *
    *    FlightThreshold
    *       This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    *       Default: 10
    *
    *    DisableOnGM
    *        This directive controls hack checks will be disabled for GM's or not.
    *        Default: 0
    *
    ******************************************************/
    
    <AntiHack Teleport="1"
              Speed="1"
              FallDamage="1"
              Flight="1"
          FlightThreshold="10" 
              DisableOnGM="1">
    
    
    /******************************************************
    * Period Setup
    *
    *    These are the periods that the server will wait before doing periodic duties. At the moment only
    *    arena point calculation and honor point calculation are used here.
    *
    *    Default:
    *         Arena: weekly
    *         Honor: daily
    *             (blizzlike values)
    *
    ******************************************************/
    
    <Periods HonorUpdate="daily"
             ArenaUpdate="weekly"
             DailyUpdate="daily">
    
    
    /******************************************************
    * Channels Setup
    *
    *    These directives control some of the aspects in the channel system.
    *
    *    BannedChannels
    *         If you would like to ban users from creating or joining a channel specify them here in a ';'
    *         seperated list.
    *         Default: ""
    *
    *    MinimumLevel
    *      Channel names that require a minimum level of 10 to talk, seperate names by ;
    *      Default: ""
    *
    *
    ******************************************************/
    
    <Channels BannedChannels=""
              MinimumLevel="">
    
    
    /******************************************************
    * VoiceChat Setup
    *
    *    These directives control some of the aspects in the voice chat system.
    *
    *    Enabled
    *         If you want to enable the voice chat system, this must be set to 1.
    *         Default: "0"
    *
    *    ServerIP
    *         This is the IP of the voice chat server.
    *         Default: "127.0.0.1"
    *
    *    ServerPort
    *         This is the TCP port of the voice chat server.
    *         Default: "3727"
    *
    ******************************************************/
    
    <VoiceChat Enabled="0"
               ServerIP="127.0.0.1"
               ServerPort="3727">
    
    
    /******************************************************
    * Remote Console Setup
    *
    *    These directives control the remote administration console.
    *
    *    Enabled
    *         If you want to enable the remote administration console, set this.
    *         Default: 0
    *
        Host
    *         This is the interface the RA server listens on.
    *         Default: "0.0.0.0"
    *
    *    Port
    *         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    *         Default: 8092
    *
    ******************************************************/
    
    <RemoteConsole Enabled="0"
                   Host="0.0.0.0"
                   Port="8092">
          
    
    /******************************************************
    * Scripting Engine Setup
    *
    *    ArcEmu can support multiple script backends via the means of loading .dll files for them.
    *    This section in the config can enable/disable those backends.
    *
    *    LUA
    *         If you would like to enable the LUA scripting backend, enable this.
    *         Default: 0
    *
    ******************************************************/
    
    <ScriptBackends LUA="1">
    
    
    /******************************************************
    * Movement Setup
    *
    *    NOTE: For any of these directives to function, movement compression has to be compiled into
    *          the server.
    *
    *    FlushInterval
    *        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    *        If you have a high threshold, keeping this at 1-2 seconds will work better.
    *        Default: 1000 (one second)
    *
    *    CompressionRate
    *        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    *        Range: 1-9 (or 0 is disable)
    *        Default: 1
    *
    *    CompressionThreshold
    *        This is the distance that will be used to determine if an object needs to be sent compressed or
    *        normal. It is advised to keep it at least 30 units. This value is used for players.
    *        Default: 30.0
    *
    *    CompressionThresholdCreatures
    *        This is the distance that will be used to determine if an object needs to be sent compressed or
    *        normal. This value is used for creatures, so it can be a lot lower.
    *        Default: 10.0
    *
    ******************************************************/
    
    <Movement FlushInterval="1000"
              CompressRate="1"
              CompressThreshold="30.0"
              CompressThresholdCreatures="10.0">
    
    
    /******************************************************
    * Localization Setup
    *
    *    LocaleBindings
    *        This is a list of locale names and the other locale you want to associate with them.
    *        For example, to make the European client always use the french language, "enGB=frFR"
    *
    *        Must be terminated by a space.
    *
    *        Default: ""
    *
    ******************************************************/
    
    <Localization LocaleBindings="">
    
    
    /******************************************************
    * Dungeon / Instance Setup
    *
    *    TakeGroupLeaderID
    *        If a player doesn't have an instance id, the group isn't already assigned
    *        to an instance and the group or raid leader already have one, the player will
    *        be bound to the instance id of the group/raid leader.
    *        Default: 1 (enabled)
    *
    *    SlidingExpiration
    *        If enabled, persistent instances will expire relative to the creation time.
    *        Otherwise persistent instances will expire at fixed points of time. (blizz like)
    *        Default: 0 (disabled)
    *
    *    DailyHeroicInstanceResetHour
    *        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
    *        Default: 5
    *
    *    CheckTriggerPrerequsites
    *        Entering & checks
    *        Default: 1
    ******************************************************/
    
    <InstanceHandling TakeGroupLeaderID="1" 
                      SlidingExpiration="0" 
                      DailyHeroicInstanceResetHour="5" 
                      CheckTriggerPrerequsites="1" >
    
    
    /******************************************************
    * BattleGround settings
    * Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
    *
    *    AlteracValley
    *    AV_MIN
    *    AV_MAX
    *
    *    ArathiBasin
    *    AB_MIN
    *    AB_MAX
    *
    *    WarSong
    *    WS_MIN
    *    WS_MAX
    *
    *    Eyes Of The Storm.
    *    EOS_MIN
    *    EOS_MAX
    *
    ******************************************************/
    <Battleground AV_MIN="0"
                  AV_MAX="40"
                  AB_MIN="4"
                  AB_MAX="15"
                  EOS_MIN="4"
                  EOS_MAX="15"
                  WS_MIN="2"
                  WS_MAX="10"
                  SOTA_MIN="10"
                  SOTA_MAX="15">
    
    /*****************************************************
    *    Arena Settings
    *
    *    Allows you to control current season and its progress.
    *
    *     Season - has to be higher than 0 for arenas to work.
    *     Progress - sets the progress, 0 = finished, 1 = in progress
    *
    *****************************************************/
    <Arena Season = "5"
           Progress = "1">
    
    /*****************************************************
    *    StartOnGMIsland
    *
    *     Makes GM Characters start on GM Island
    *
    *     Also sets their bind location to GM Island
    *     Default:1 (Yes)
    *
    *****************************************************/
    <GameMaster StartOnGMIsland = "1">
    
    /*****************************************************
    * Limits settings
    *
    *    Enable
    *        Enable damage/hp/mana caps
    *        Default value: 1 (enabled)
    *    AutoAttackDmg
    *        Maximum damage allowed for auto-attack (swing)
    *        Default value: 10000
    *    SpellDmg
    *        Maximum damage allowed for a spell
    *        Default value: 30000
    *    Health
    *        Maximum health allowed for a player
    *        Default value: 100000
    *    Mana
    *        Maximum mana allowed for a player
    *        Default value: 80000
    *    Disconnect
    *        Disconnect player that exceeds limits above
    *        Default value: 0 (disabled)
    *    BroadcastGMs
    *        Broadcast a message to online GMs when max damage/hp/mana has been exceeded (possible cheating)
    *        Default value: 1 (on)
    *
    * Set any of the values above to 0 to disable that setting (for example, set SpellDmg="0" to disable only spell damage limit)
    *
    *****************************************************/
    
    <Limits Enable="1" AutoAttackDmg="10000000" SpellDmg="9000000" Health="2000000" Mana="1000000" Disconnect="1" BroadcastGMs="1">
    Logon:
    Code:
    /***********************************************************************
    * ArcEmu Logonserver Configuration File
    * Last edited: 7/18/09
    ***********************************************************************
    * Configure the logonserver to connect to the accounts database below *
    ***********************************************************************
    * LogonDatabase.Host      - The hostname that the database is located on
    * LogonDatabase.Username  - The username used for the mysql connection
    * LogonDatabase.Password  - The password used for the mysql connection
    * LogonDatabase.Name      - The database name
    * LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
    * LogonDatabase.Type      - Client to use. 1 = MySQL 
    * Not supported:          - 2 = PostgreSQL (Partly implemented)
    * Not Supported:          - 3 = SQLite (unimplemented)
    ***********************************************************************/
    
    <LogonDatabase Hostname = "localhost"
                   Username = "root"
                   Password = "ascent"
                   Name     = "logon"
                   Port     = "3306"
                   Type     = "1">
    
    
    
    /* Host Directive
    *
    *    This is the address that the realmlist will listen on.
    *    To listen on all addresses, set it to 0.0.0.0
    *    Default: 127.0.0.1 (localhost)
    *
    *    Note: ISHost is the interserver communication listener.
    */
    
    <Listen Host = "0.0.0.0"
            ISHost = "0.0.0.0"
            RealmListPort = "3724"
            ServerPort = "8093">
    
    
    /* Server console logging level
    *
    *    This directive controls how much output the server will
    *    display in it's console. Set to 0 for none.
    *    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    *    Default: 3
    */
    
    <LogLevel Screen = "0"
              File = "-1">
    
    /* Account Refresh Time
    *
    *    This controls on which time interval accounts gets 
    *    refreshed. (In seconds)
    *    Default = 600 
    *    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
    *    
    */
    
    <Rates AccountRefresh = "600">
    
    /* Accepted Build Range Setup
    *
    *    These two directives set up which clients will be
    *    allowed to authenticate with the realm list.
    *
    *    Set these to the same builds that the server was
    *    compiled for.
    *
    *    As of the last update, version 3.3.3 was build 11685, patch 3.3.3a is 11723.
    */
    
    <Client MinBuild = "11685"
            MaxBuild = "11723">
    
    /* WorldServer Setup
    *
    *  RemotePassword
    *    This directive controls the password used to authenticate with the worldserver.
    *    It must be the same between the two configs. If it is not, your server will
    *    not register.
    *
    *    Default: "change_me_logon"
    *
    *  AllowedIPs
    *    This section MUST be completed, otherwise all attempts to link your servers will fail.
    *    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
    *    to make server connections to your logonserver, and register realms.
    *    For example, everything in the 127.0.0.* range would be:
    *         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
    *
    *    To allow a single IP,
    *         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
    *
    *  AllowedModIPs
    *    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
    *    (adding bans, GMs, account permissions, etc)
    */
    
    <LogonServer RemotePassword = "ascent"
                 AllowedIPs = "127.0.0.1/24"
                 AllowedModIPs = "127.0.0.1/24">
    Any help would be appreciated

    ---------- Post added at 09:13 PM ---------- Previous post was at 09:10 PM ----------

    Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

    ---------- Post added at 09:31 PM ---------- Previous post was at 09:13 PM ----------

    Image link

    ---------- Post added at 09:37 PM ---------- Previous post was at 09:31 PM ----------

    The MySQL window was opened while i had the 1st world server opened i closed the (1st) world to go back and edit the notepad thats when i opened (2nd one) it again to get the "ascent" error
    Last edited by stoneharry; 10-21-2010 at 02:03 AM.

    Error help w/ images
  2. #2
    gillisrofl's Avatar Sergeant
    Reputation
    22
    Join Date
    Oct 2009
    Posts
    47
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Alright so first of all you see that you have an error at your world exe which says:

    Code:
    Connection failed due to: 'Access denied for user 'ascent'@'localhost' (using password: YES)'
    And also a similar bug at your cmd.

    Take notice of how it says: "using password: YES". This means that something has to be wrong with the password or user name it is using to connect to your database. However, as you can see, your logonserver.exe works fine right? That means something gotta be wrong in your world.conf. Since all your three Databases (logon, character, world) are within the same MySQL database, they got to have the same login info.
    Now take a look at these rows in your .conf files:

    World config
    <WorldDatabase Hostname = "localhost" Username = "ascent" Password = "ascent" Name = "world" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "ascent" Password = "ascent" Name = "characters" Port = "3306" Type = "1">
    Logon config
    <LogonDatabase Hostname = "localhost"
    Username = "root"
    Password = "ascent"
    Name = "logon"
    Port = "3306"
    Type = "1">
    Can you see anything wrong here if your compare the files ?

    The answer is that, since your logonserver.exe works fine, THAT Username GOT TO BE correct!! Which means that the Username used in the world conf file for character and world database is wrong!! Which in this case is named "ascent". The correct Username is "root". In other words, change the previous lines your your world config to these:

    <WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "characters" Port = "3306" Type = "1">
    Problem solved!... Or so I think. I am still a bit confused about the cmd trying to connect to the logon, so please reply if something is still wrong and I will try to help you out.

  3. #3
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ok thank you bud

  4. #4
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ok was at school when i read this now when i got home i tried it and still didnt help. Sorry:/

    ---------- Post added at 04:22 PM ---------- Previous post was at 04:19 PM ----------

    Also
    Code:
    <Listen Host = "0.0.0.0"
            WorldServerPort = "8129">
    Might be need to be changed to:
    Code:
    ]<Listen Host = "127.0.0.1"
            WorldServerPort = "8129">
    Also the logon is saying that my internal ip is invalid. I know how to fix that.

  5. #5
    project anthrax's Avatar Contributor
    Reputation
    180
    Join Date
    Nov 2007
    Posts
    993
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    add me
    removed by Unholy

  6. #6
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ok that didnt work either >.< and i will, anthrax

    ---------- Post added at 05:20 PM ---------- Previous post was at 04:51 PM ----------

    i added you and sent a message

    ---------- Post added at 05:49 PM ---------- Previous post was at 05:20 PM ----------

    The MySQL had this error: Got error 127 when reading table './logon/accounts'
    Ok...
    Logon/accounts notepads:
    #1:
    Code:
    þ
    	    0  **µ         4 	      À        **  }Ã  
            //                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       €    ( `    €   @` ÿPRIMARYÿaÿ                                                                                                                                                                                                                                                                                                                                                                                                           ÿ                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 enUS                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 MyISAM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   ¬                                           Account Information                                                                                                                                                                                               
     Ã Ý  µn         P   ~   Ã 
    )                                          acct  login  	password  encrypted_password  gm 	 banned 
     
    lastlogin  lastip  email 
     flags  forceLanguage  muted  
    banreason 
    
          À	 I`    @   À 	F` g   @   À <~ È       À  L` G      À 	
    
     ¨ @   À  
    
     ¬ >    À 00 °      À IÀ á      À 
     ¢ 
        À  £      À   ³     À  
    Eý·  €   À  ÿacctÿloginÿpasswordÿencrypted_passwordÿgmÿbannedÿlastloginÿlastipÿemailÿflagsÿforceLanguageÿmutedÿbanreasonÿ Unique IDLogin usernameLogin passwordGame permissionsLast login timestampLast remote addressContact e-mail addressClient flags
    #2:

    ---------- Post added at 05:52 PM ---------- Previous post was at 05:49 PM ----------

    Code:
    þ
    	    0  **µ         4 	      À        **  }Ã  
            //                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       €    ( `    €   @` ÿPRIMARYÿaÿ                                                                                                                                                                                                                                                                                                                                                                                                           ÿ                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 enUS                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 MyISAM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   ¬                                           Account Information                                                                                                                                                                                               
     Ã Ý  µn         P   ~   Ã 
    )                                          acct  login  	password  encrypted_password  gm 	 banned 
     
    lastlogin  lastip  email 
     flags  forceLanguage  muted  
    banreason 
    
          À	 I`    @   À 	F` g   @   À <~ È       À  L` G      À 	
    
     ¨ @   À  
    
     ¬ >    À 00 °      À IÀ á      À 
     ¢ 
        À  £      À   ³     À  
    Eý·  €   À  ÿacctÿloginÿpasswordÿencrypted_passwordÿgmÿbannedÿlastloginÿlastipÿemailÿflagsÿforceLanguageÿmutedÿbanreasonÿ Unique IDLogin usernameLogin passwordGame permissionsLast login timestampLast remote addressContact e-mail addressClient flags


    ---------- Post added at 05:55 PM ---------- Previous post was at 05:52 PM ----------

    #3:
    Code:
    þþ Ò ° d **    0   9ÿ                      ÿÿÿÿÿÿÿÿ              0                                 °   	                     ÿÿÿÿÿÿÿÿ        KŠnÜ           KŠnÜ                                                                           µ  ¶     À              p                   
     
     
    	?     @         )  f  gÀ     `                    a     a          a                1     Á                   ÿ                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      .\world\item_randomsuffix_groups        ß ÞÆ›þþ  Ó ° d Ô    0  ~ý                      ¼–    .™            ~ý     ÿÿÿÿÿÿÿÿÿÿÿÿ                 è³³ ³                               ÌmŠKÌmŠK        ÿ       )       Ô                  ÿÿÿÿÿÿ(  üÿÿÿÿ  |ÿÿÿÿ             )   )   )   )                                                                                                                                 ø³p	³p	³è	³            h³h³ð³**³    (        °;\ *6\ °9\ ð9\ *<\ *:\     P;\     8
         ÌmŠK                   f   
                                 $              x§      admin                                                                                                                                                                                                                                                                                                                                                                                               .\world\item_randomsuffix_groups        ß ÞÆ›þþ  Ó ° d Ô    0  ~ý                      ¼–    .™            ~ý     ÿÿÿÿÿÿÿÿÿÿÿÿ                 è³³ ³                               ÌmŠKÌmŠK        ÿ       )       Ô                  ÿÿÿÿÿÿ(  üÿÿÿÿ  |ÿÿÿÿ             )   )   )   )                                                                                                                                 ø³p	³p	³è	³            h³h³ð³**³    (        °;\ *6\ °9\ ð9\ *<\ *:\     P;\     8
         ÌmŠK                   f   
                                 $              x§


    ---------- Post added at 06:48 PM ---------- Previous post was at 05:55 PM ----------

    The 1st and 2nd one are the same. Fail copy lol.
    #2:
    Code:
     , 
    ÿ   adminadmin azߥ®K	127.0.0.1 enUS

  7. #7
    2dgreengiant's Avatar ★ Elder ★


    Reputation
    1192
    Join Date
    Feb 2007
    Posts
    7,129
    Thanks G/R
    1/3
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    <Listen Host = "0.0.0.0"
    WorldServerPort = "8129">
    Should stay as it is do not change it. As for the mysql issue, you need ot make sure the username and password are the same in the config's as it is in the mysql database. And for the RED error just re-execute the accoutns sql. If you do not have that sql then you can find it in the SVN of the emulator that you downloaded e.g. arcemu.
    If you need me you have my skype, if you don't have my skype then you don't need me.

  8. #8
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    How do i re-execute? and is the mysql database in \ArcEmu\Server\mysql\data\mysql\db?

  9. #9
    2dgreengiant's Avatar ★ Elder ★


    Reputation
    1192
    Join Date
    Feb 2007
    Posts
    7,129
    Thanks G/R
    1/3
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You will need a program such a Navicat or SQLyog or Heudsql which is a database manageemnt program. From there you conenct to your database using the mysql user and pass then you right click on the accounts table and select something on the lines of execute, selecting the new accounts table from your emulators svn sql folder.
    If you need me you have my skype, if you don't have my skype then you don't need me.

  10. #10
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ok thx ill tell you if it works or not:P hope it does. Be so cool to own my own game.. or server whichever

    ---------- Post added at 07:25 PM ---------- Previous post was at 07:19 PM ----------

    Sorry if i'm a noob... but it says "Unable to connect to MySQL on 'localhost'

  11. #11
    2dgreengiant's Avatar ★ Elder ★


    Reputation
    1192
    Join Date
    Feb 2007
    Posts
    7,129
    Thanks G/R
    1/3
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Your mysql server is not running then. Are you using a repack or did you install mysql yourself?
    If you need me you have my skype, if you don't have my skype then you don't need me.

  12. #12
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ohhhh... duh

    ---------- Post added at 07:49 PM ---------- Previous post was at 07:47 PM ----------

    Alrighty im using the SQLyog. What do i do to execute it?

    ---------- Post added at 08:18 PM ---------- Previous post was at 07:49 PM ----------

    When i right-click on it i dont see anything with execute also i was clicking around and the window said "select * from `logon`.`accounts` limit 0, 50" "Table 'accounts' is marked as crashed and should be repaired" Thats what was wrong with the MySQl.... How do i fix it?
    Last edited by TarridoN; 10-21-2010 at 07:25 PM.

  13. #13
    gillisrofl's Avatar Sergeant
    Reputation
    22
    Join Date
    Oct 2009
    Posts
    47
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You could try executing a new logon file. You can find one here: SourceForge.net Repository - [arcemu] Index of /tags
    (Though if you have a logon_structure.sql inside your repack, you should use that instead).
    Just browse to the patch it is supposed to run on, go to the SQL folder, and get the XXXX_logon_structure.sql

    To execute a file into on of your databases in SQLyog, simply right click the desired database (in this case "logon" database), click on "Restore From SQL Dump...". It should pop-up a window showing the Database selected, what file to execute, and an execute button. First off find your desired .sql file by clicking the "..." button right to the row under "File to execute". When you find the SQL file, select it, and then press execute! Wait until it's done and you have successfully executed a sql file! In this case the logon structure.
    (Make sure you execute this into your logon Database. If you want to be on the safe side, create another Database named whatever you wish like: "alogon", and then execute it into that. In order to test it, you need to edit your logon.conf like this: )
    <LogonDatabase Hostname = "localhost"
    Username = "root"
    Password = "ascent"
    Name = "alogon"
    Port = "3306"
    Type = "1">
    Otherwise I could post a picture guide xP

  14. #14
    TarridoN's Avatar Sergeant
    Reputation
    1
    Join Date
    Oct 2010
    Posts
    40
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    It says i have to choose a file. What do i input?
    Again its saying Cannot connect to logoncommserver. The logon server is saying now lol XD that the 1.198.***.1 is an invalid ip adress
    Last edited by TarridoN; 10-22-2010 at 10:58 PM.

  15. #15
    gillisrofl's Avatar Sergeant
    Reputation
    22
    Join Date
    Oct 2009
    Posts
    47
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Well, you have to choose a file to execute in SQL ^^ as I wrote in my last message:
    First off find your desired .sql file by clicking the "..." button right to the row under "File to execute". When you find the SQL file, select it, and then press execute!
    Also it's weird that the logonserver would try to find your router IP. I am not sure but there could be two ways to solve the problem:

    1. You could have changed some of the lines in your logon.conf, but this is how they should look like:

    <Listen Host = "0.0.0.0"
    ISHost = "0.0.0.0"
    RealmListPort = "3724"
    ServerPort = "8093">
    and

    <LogonServer RemotePassword = "ascent"
    AllowedIPs = "127.0.0.1/24"
    AllowedModIPs = "127.0.0.1/24">
    (Yes you will still be able to have your server online for others like this).
    Make sure that the lines look like this!


    2. The reason why 1.198.***.1 is an invalid IP is because it's your router IP. Go here to find out your current IP: What Is My IP Address - Shows Your IP Address

    After you find it, copy your IP, then go into your repack and find the configs and open up realms.conf. In there, change this line:
    Code:
    <Realm1 Name = "World of Treasures"
            Address = "YOUR_IP_HERE:8129" 
            Icon = "PVP"
            Population = "1.0"
            TimeZone = "1">
    (This will make your server available for others. If you don't want that, replace "YOUR_IP_HERE:8129" with "127.0.0.1:8129").

    Hopefully one of these solutions will work
    Last edited by gillisrofl; 10-23-2010 at 08:19 AM.

Page 1 of 2 12 LastLast

Similar Threads

  1. Compiling errors {help plz lol}
    By jokerjokes in forum World of Warcraft Emulator Servers
    Replies: 30
    Last Post: 02-19-2008, 09:44 PM
  2. error help
    By az121 in forum World of Warcraft Emulator Servers
    Replies: 17
    Last Post: 01-25-2008, 04:05 PM
  3. [Help] Making Images Take Less Space
    By saltysalami52 in forum Art & Graphic Design
    Replies: 3
    Last Post: 11-28-2007, 10:58 PM
  4. microsoft Visual Studios ERROR help PLEASE
    By Nextgenerationrepack! in forum World of Warcraft Emulator Servers
    Replies: 2
    Last Post: 10-10-2007, 04:07 PM
  5. WoW Error Help please!
    By Bazerke in forum World of Warcraft General
    Replies: 4
    Last Post: 06-26-2007, 07:37 PM
All times are GMT -5. The time now is 03:25 PM. Powered by vBulletin® Version 4.2.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved. User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Google Authenticator verification provided by Two-Factor Authentication (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search