[Beta] UntzBot (Space Missions Bot, recorder+player)

[wollyboy]

I cant get Sullist Working , I tried every resolution , any help ?? and i suck at recording missions, thats why i got the bot bec im gimp!!!!!!!

[thephilz]

I cant get Sullist Working , I tried every resolution , any help ?? and i suck at recording missions, thats why i got the bot bec im gimp!!!!!!!

is your bloom on?
is it on low?
try using the 'updated' scripts in the first post, top link

[Xaeonis]

Okay,

first off - this program, for just being a mouse/pointer script and whatnot is very clean. Very fun to watch and listen to and be able to do other things. Great bot.

However, the de-syncing thing is whats preventing me from buying the bot atm. I run a quadcore/8gbRAM/med-high GPU and somehow, it desyncs. Sometimes its near the end, other times, right at the start of Sarapin, he starts missing EVERYTHING.

Now, is there a current workaround for the desyncing or just let it run and hopefully itll get back on track? Im not looking to pay money for something that only works 1/2 of the time. Especially when I go through and make my own flight paths and stuff.

So yeah, great program, with great potential - but right now, kinda annoying.

[thephilz]

generally, the performance is determined by WHEN it starts the script
the rest of the run should follow directly from the start point - if the start is late, then the whole run is slightly late, if early then early, if on time then it should be on time, desyncing during a run is not a very common issue and 'probably' has more to do with your computer than the bot itself, despite your high specs (i run a piece of junk [email protected], radeon 6900, 4gb ram and i experience no desyncing whatsoever)
it is even possible to have this running on a properly set up vmware machine so yeah, specs dont mean 'too much', the desync issue is simply dependant on whats going on the background
where specs matter is how 'constant' the start sync is - on this computer, depending on the mission, it can vary from 75-95%+ success rate, whereas on my brother vastly superior computer, he has a constant 98%+ (even on 40sullust/40drexel, 44zosha/44clouds)
as a point of interest, if i have a heavy load of chrome windows in the background (specifically with flash in them, such as youtube or other video sites), or have another game running (like ME2), or have a movie on pause, then the bot instantly drops around 30% success rate, and experiences de-sync if im unlucky, which might be your case

ANYWAY

1.2 is scheduled for next week (i dont know if it means in 3 days or in 10 days), so here are a few things i should say
- the bot may or may not break - if it does, then i will try to get a functional version working asap
- the crew skills sniping mode may or may not be introduced immediately, as getting the bot running is the priority
- DO NOT CUSTOMIZE YOUR UI (yet) - just to be safe. at the moment, it detects your world map on the bottom right corner, so i may change the detection mechanism to allow you to change your UI around, but thats a maybe. besides, youre botting, not playing, so just keep it default for now.

thats all

[warheart209]

Can you Space bot multiple accounts with this program using isboxer/inner space? (win 7)?

[jar0cks]

See 3 posts down

[wollyboy]

Hello Thehpilz I got the sullust timing on , but now it dies near the end it keeps getting hit bad from blasters and dies , i have all ship upgrades also , any suggestions ?

[MiSFiTiSM]

I would just like to say THANK YOU! Works very nice.

Not trying to bash the Lucky Spacebot but I spent 2 days messing with settings and trying to get it to run with no luck. Started UntzBot and withing 15min of making changed and recording a fight it was up and running. Still running going on 20hrs with 168wins and 1 loss.

When I get off work I'm going home and donating for full version.

Thanks again

[jar0cks]

So I managed to make this work once, then never again. It ran through the Imperial lvl 34 ice field mission once (without success, ship got killed halfway through with all grade 3 upgrades, grade 4 beam charger). UntzBot41x.txt says that if the debugger does not work to e-mail you, but there are no e-mail addresses anywhere (either the OP or the README UntzBot41x.txt) so I guess I'll be posting here.

The first issue: World map can't be found. UntzBot41x.txt says to run debugger which I did. When I run the debugger, it gets stuck after the third Z press (can't seem to detect the TOP LEFT coordinates). My monitor's resolution is 2560x1600. The game client is running on 800x600 on LOW.
SCREENSHOT

The first time I ran the debugger, after four Z press, it repositioned the game client window to be OUTSIDE my monitors field by a few pixels to the left and to the top (this caused a part of the top and left to be invisible to the human eye, so to speak) Then the debugger reported success and saved the config. When I loaded UntzBot41x.exe, I chose CUSTOM, and that is how it ran the mission -- but not until I enabled the left quickslot, and disabled the right. A proper installation.txt or README.txt should be written on how to properly setup the game client. It could save you a lot of grief.

For some unknown reason, the debugger now refuses to re-align the client outside the monitor's boundaries as it did before. Not sure why.

I tried re-downloading, rebooting, physically disconnecting my 2nd and 3rd monitor, all kinds of resolutions, nothing has worked.

Lucky's Spacebot is the only not that has ever worked for me (and it does so flawlessly, but is pretty basic). If I can get this to work it's a guaranteed 20$ donation for you.

PS.
I run a very fast rig (i7 920 @ 4.0ghz, 6GB of RAM, GTX 680, Win7 64bit Aero Theme)

[thephilz]

you only need to run debugger once, which saves the offset to the settings file, then you dont need to touch the debugger again (like in video #3)
from the looks of it, you are either running in AERO mode (default), or the custom offset was changed back to default, as the window size is definitely the same size used for AERO (or a reset custom)

and yes,
"The first time I ran the debugger, after four Z press, it repositioned the game client window to be OUTSIDE my monitors field by a few pixels to the left and to the top (this caused a part of the top and left to be invisible to the human eye, so to speak) Then the debugger reported success and saved the config. When I loaded UntzBot41x.exe, I chose CUSTOM, and that is how it ran the mission"

is entirely correct, but

"but not until I enabled the left quickslot, and disabled the right"
should have no effect on finding the world map

try deleting scripts/settings.txt and script/settings2.txt and see if the routine from the start works again

[Xaeonis]

generally, the performance is determined by WHEN it starts the script
the rest of the run should follow directly from the start point - if the start is late, then the whole run is slightly late, if early then early, if on time then it should be on time, desyncing during a run is not a very common issue and 'probably' has more to do with your computer than the bot itself, despite your high specs (i run a piece of junk [email protected], radeon 6900, 4gb ram and i experience no desyncing whatsoever)
it is even possible to have this running on a properly set up vmware machine so yeah, specs dont mean 'too much', the desync issue is simply dependant on whats going on the background
where specs matter is how 'constant' the start sync is - on this computer, depending on the mission, it can vary from 75-95%+ success rate, whereas on my brother vastly superior computer, he has a constant 98%+ (even on 40sullust/40drexel, 44zosha/44clouds)
as a point of interest, if i have a heavy load of chrome windows in the background (specifically with flash in them, such as youtube or other video sites), or have another game running (like ME2), or have a movie on pause, then the bot instantly drops around 30% success rate, and experiences de-sync if im unlucky, which might be your case

I can understand why other programs might interfere with the script starting and stopping on time.

I just tried closing my firefox (which admittedly, has about 20 tabs open at one time, maybe more) and the script ran fine twice, and then the third one, just didnt sync at all, and the forth run, desynced so bad, that its completely missing objectives now, even though the first 2 times ran without a hitch.

There HAS to be some way to keep it in sync the ENTIRE mission. Maybe add sync points throughout?

Your system is about at mine ( I run a Q6600 quad with a 5770 radeon card and 8gbs RAM) - why would something above average with a significant set of individual processing power, NOT run a mouse pointer script properly in, say, addition to a 800x600 swtor? Just seems like something is causing the improper syncing...

So help me out here - Ive obviously made a pretty good recording os Sarapin for my BH to run as it runs fine for an indeterminate amount of time until it decides to desync. What can possibly be done to help it out? Honestly, I would purchase this program if it werent for the inconsistent results.

[jar0cks]

you only need to run debugger once, which saves the offset to the settings file, then you dont need to touch the debugger again (like in video #3)
from the looks of it, you are either running in AERO mode (default), or the custom offset was changed back to default, as the window size is definitely the same size used for AERO (or a reset custom)

and yes,
"The first time I ran the debugger, after four Z press, it repositioned the game client window to be OUTSIDE my monitors field by a few pixels to the left and to the top (this caused a part of the top and left to be invisible to the human eye, so to speak) Then the debugger reported success and saved the config. When I loaded UntzBot41x.exe, I chose CUSTOM, and that is how it ran the mission"

is entirely correct, but

"but not until I enabled the left quickslot, and disabled the right"
should have no effect on finding the world map

try deleting scripts/settings.txt and script/settings2.txt and see if the routine from the start works again

First, thanks a lot for responding, I really appreciate you trying to help me!

I realized it saved the config and I didn't need to run the debugger again, but I HAD to run it each time I close and re-opened the game client because the default position the game client takes when windowed (basically taking the top left corner position) prevents the worldmap from being detected. I can't move the window manually because Windows automatically re-aligns it. Somehow, only the debugger was successful in having the window be slightly offscreen, and now it can't.

When the debugger did work, it did so after 2 or 3 Z press at max. Now, after the third, it doesn't matter how often I press Z, nothing happens...

I am quite sure the issue stems from my multi-monitor setup but even when the screens are physically disconnected and Windows only detects the one center monitor, if I reconnect the DVI cables, it automatically remembers their last configuration (portrait mode, their resolution (which is different from the center monitor), and placement) so this leads me to believe whatever memory is being kept prevents your script from detecting correct position.

Lucky's works flawlessly so I am not sure what the difference is in your detection methods or why this particular bot is giving me problems. Its very weird.

[bambam922]

what is ur delay ?

2000 ms. default delay.

[wollyboy]

Ive have recorded a Sullust run with flying colors thinking i have recorded the win and i came back and it was not recorded ?? wtf is going on ??

[wollyboy]

Ive have recorded a Sullust run with flying colors thinking i have recorded the win and i came back and it was not recorded ?? wtf is going on ??

WOW i give up i can not get the missions to work after 34
tried everything. I even recorded new scripts, and still fails so another question how the F can i get this working ? can anyone else load up their 40 or 44 imper missions that work ??

PLEASE