[Goldfarming] Dank Celler Gold and Loot [AutoIT Script] [WIZARD] [1920x1080]

[chancity]

Yes, you could get coordinates by using AutoIt3 info, then after you kill sarkoth use the mouseclick function to middle click on these coordinates with sleep times in between to give it time to walk around. This was already done in some older script, not sure if its stil in any of the scripts that are on the topic start post now.

Get the walk path from the main script I really recommend have 20 pickup radius that alone improves gph along with high dps.

My stats:
25% MS
1.47 AS
280% GF
36K BUFFED DPS

I run low 17s not looting and high 18s looting with a Avg gph of 550k

Sent from my DROID RAZR using Tapatalk 2

[tiporaro]

that excacly the spot man! thanks sir.. what should i put it to?

Adjust Teleport Time in the ini file a little bit up at a time until you no longer get the d/c.

[d3votion]

Hahaha, sometimes i think i should smoke less ^^
Working with VMware confused me hard, edited wrong lawl.ini ^^ works now, thx for being available for help tho! mb i need it again

[MacGregor]

Change the loot time in the ini to prevent missclicks

Thx, I will do - increasing it if I understand well the principle.

[chancity]

Thx, I will do - increasing it if I understand well the principle.

Yes increase, the lower it is the more it will click. The higher it is the longer it will wait to try clicking again allowing you to pickup that item.

Sent from my DROID RAZR using Tapatalk 2

[jcunit]

Haha glad you got it working afterall.

This is the script with the latest little weaks I've done, only thing noticable is the longer sleep after killing Sarkoth to avoid picking up whites.
Also added a tag to the screenshots it makes if it doesn't find a cellar, new format of the screenshots is:
#Run,'c', #Cellcoord. It also adds didfind if the function findcellar did find it and clicked but stil didn't get in.

So far I've noticed the same as chancity;s already reported. Findcellar always finds the cellar when there is one, but it sometimes walks into the wall. So far this has happened 5 times for me, all with CellCoord = 0.

Newest script: [AutoIt] NoMoreTrash - Pastebin.com.

[tiporaro]

Wanted to post a 1 hr bench I just finished with the new jcunit script (with a local cellar.png pic to cleanup cellar detects) - I know I always look for relative benchmarks on these scripts to know if what I'm getting is reasonable, and if I'm missing some optimization.



I dialed back how aggressive I had the delays, as I found every now and then I'd run into a minor issue - missing the last gold piles if Sark threw them late, small delays on a mediocre system every now and then causing hiccups, etc...If I was not on a secondary pc I might be able to clean up the Open Cellar times a bit.

(the 1 death was an unfortunate teleport into the middle of 6 mobs on an open cellar spawn, so no wave of force, and my hp took a hit with some recent regearing down to ~10k)

So for reference, relevant stats:
1.55 APS
28.5k dps buffed
303 gf / +24 radius
24 movement speed

And the ini settings:
DPS 25.7k
Cellar Check=165
Load Time=1400
Sarkoth Doorway=1550
Cellar Run=260
Wormhole Cast=1275
Loot Time=200
Abort Spells=165

[chancity]

Haha glad you got it working afterall.

This is the script with the latest little weaks I've done, only thing noticable is the longer sleep after killing Sarkoth to avoid picking up whites.
Also added a tag to the screenshots it makes if it doesn't find a cellar, new format of the screenshots is:
#Run,'c', #Cellcoord. It also adds didfind if the function findcellar did find it and clicked but stil didn't get in.

So far I've noticed the same as chancity;s already reported. Findcellar always finds the cellar when there is one, but it sometimes walks into the wall. So far this has happened 5 times for me, all with CellCoord = 0.

Newest script: [AutoIt] NoMoreTrash - Pastebin.com.

And I might add coord 0 was the default coord before cellar detection was made and its not jcunit script, all he's done is added looting functions that I had removed for testing lol. I thank him for doing that for me though. The best way to optimize cellar detection is to take a picture of the cellar icon on your map depending on what game setting you have it could be different from mine.

Wanted to post a 1 hr bench I just finished with the new jcunit script (with a local cellar.png pic to cleanup cellar detects) - I know I always look for relative benchmarks on these scripts to know if what I'm getting is reasonable, and if I'm missing some optimization.



I dialed back how aggressive I had the delays, as I found every now and then I'd run into a minor issue - missing the last gold piles if Sark threw them late, small delays on a mediocre system every now and then causing hiccups, etc...If I was not on a secondary pc I might be able to clean up the Open Cellar times a bit.

So for reference, relevant stats:
1.55 APS
28.5k dps buffed
303 gf / +24 radius
24 movement speed

And the ini settings:
DPS 25.7k
Cellar Check=165
Load Time=1400
Sarkoth Doorway=1550
Cellar Run=260
Wormhole Cast=1275
Loot Time=200
Abort Spells=165

Sent from my DROID RAZR using Tapatalk 2

[Atheus]

Yes, you could get coordinates by using AutoIt3 info, then after you kill sarkoth use the mouseclick function to middle click on these coordinates with sleep times in between to give it time to walk around. This was already done in some older script, not sure if its stil in any of the scripts that are on the topic start post now.

i don't know how to do any of that

[LATM]

Script and version: Lawl Script, Most recent
Help or request: - Doesn't check for cellar, doesn't even move the mouse to check for the cellar, simply leaves the game even when its there.
Desktop resolution: 1920x1080
Diablo 3 window type: Fullscreen Windowed
Operating system (32-bit or 64-bit): 64 Bit
Manual or auto install: Manual
Move bound to mouse3: Yes
Where are you starting the: On the menu. With my character at the correct checkpoint.
Game language: English

[chancity]

Script and version: Lawl Script, Most recent
Help or request: - Doesn't check for cellar, doesn't even move the mouse to check for the cellar, simply leaves the game even when its there.
Desktop resolution: 1920x1080
Diablo 3 window type: Fullscreen Windowed
Operating system (32-bit or 64-bit): 64 Bit
Manual or auto install: Manual
Move bound to mouse3: Yes
Where are you starting the: On the menu. With my character at the correct checkpoint.
Game language: English

Take or use my cellar.PNG with your game on the lowest settings.

Sent from my DROID RAZR using Tapatalk 2

[farkedup]

Ye already changed it to that, since rest was worthless.

Also changed:
-Option to loot Gems to the .ini.
Setting Loot Gems to 1 will only loot flawless emeralds now!

-Wait time between looting items in the .ini. It's called Loot time.

-Changed the left click to the corpse of Sarkoth to move (mouse3) so you don't accidently pick up stuff.

-Sometimes it would miss a cellar for me(like 1% of the cases), when saving a screenshot it now also saves which cellcoord gave the problem.

https://www.dropbox.com/s/470mgcw97v...sonly.zip?dl=1

I modded mine to click to his body also. Since I do looting I Had the sleep times lowered quite a bit in mine. I'm looting and still averaging 20s runs and 400k/hr. I came home today after being gone for a few hours to find a set piece. Sadly its only worth about 200k and a pretty nice rare was in there too so just the shot at the occasional item that'll be worth millions is worth losing 2s a run.

thanks for the flawless mod I'm going to test it this afternoon.

Tomes dont seem to be dropping very often right now. A previous version vendored my 150 stack of tomes and I just haven't recovered my stash yet! I might just play for a few hours tonight with my now upgraded MF gear.

[MrCamping]

Using Latest LAWL.

2012-07-02 14:59:57 :
************************************************
Chancity's Dank Celler

Stats:
Total Runtime: 1 hours, 25 minutes
Open Cellar Avg: 20.9s - Closed Cellar Avg: 11s
Total Cellars Found: 105 (49%)
Total Cellars Not Found: 109 (51%)
Total Deaths: 1 (0%)
Total Repairs: 2 (1%)

Loot:
Rares: 2 Legendary's: 1 Set Items: 0 Gems: 0
471K Per Hour - Accumulated Gold: 654K

From far my best run ever. Only 1 missing cellar.
I also saw my char one getting stuck in the stone wall when walking to the cellar


Awesome script chancity, Thx.

[jcunit]

It's stashing tomes and emeralds in the second tab of the stash, so you might be getting more than you actually think.

I might have found why the new script runs against the walls more often:

In the oldscript you were using MouseClick to click on the cellar, for the LAWL script you changed this to RandClick, because of this there obviously is more randomness in clicking, so if you're unlucky you might click somewhere on the cellar which makes you run against the wall. Aswell I don't think you intended to change it, since you didn't fill in all parameters of randclick, so it's using the default values for the offsets.

I've changed it back to MouseClick, testing right now!

[veritassong]

Hi I'm new

Script and version: Lawl 2.03 (the MainScript and the 21 second script doesn't work due to "server offline", allowed all through firewall)
Help or request: When I try starting the script with "=" in Menu, the mouse moves towards the top left corner of the screen and then ESC is pressed so the Options menu shows up. After a while, the script says Error: cannot find Resume button
Desktop resolution: 1920 1080
Diablo 3 window type: FullScreen
Operating system (32-bit or 64-bit): Windows 7 64 bit
Manual or auto install: auto
Move bound to mouse3: Check
Where are you starting the: Old tristam checkpoint near the metal gaates
Game language: English

Thanks