[Epic Guide] Setting Up and Running an ArcEmu Server from Scratch!

[Noobsrock7]

When I try to Build solution in step 2, I get this error fatal error C1083: Cannot open include file: 'cstring': No such file or directory

[psychobandit]

When I try to Build solution in step 2, I get this error fatal error C1083: Cannot open include file: 'cstring': No such file or directory

I think that means you are missing some files from the SVN. So, delete the folder you downloaded from ArcEMU, & then re-do the "checkout" for it again making sure there are no "limiting" settings turned on. You want it to include everything. See if that solves it.

[skatepile91]

im having a prob. with navi cat, wont let me create new database "world" or "char" or "logon" says access denied for localhost, what am i doing wrong?

[psychobandit]

Oh there are so many possibilities.....you didn't make a password for MySQL but are typing one for Navicat, you aren't typing the same password from MySQL into Navicat, Your firewall is blocking the ports needed, You are running on Win Vista (or Win 7) & didn't tell Navicat et al to run as administrator.....

so many possibilities but those are a good start.
.
.
.

[pockets08]

Hello I'm running by this real fast - do i HAVE to use 3.0.9? or can i use 3.3.2 as well??? - i want sure if it said 3.0.9 because this guide was made a while back. I'd love to find out Im okay with a 3.3.2 or higher even.

How do I Obtain the DBC and watnot, from my client?

[psychobandit]

Read the thread. Many of your questions have been answered throughout it.
A simple check of the date on the 1st post would tell you how old this guide is
You could also ditch the guide all together & just read the ArcEMU wiki pages on how to set-up, compile, etc. though it won't help you with everything, like a world DB for instance.
.
.
.

[pockets08]

:TOP
@CLS
@ECHO OFF
ECHO.
COLOR 0A
ECHO          ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
echo          º                                º
echo          º      Welcome to the WhyDB      º
echo          º        Installation Tool       º
echo          º                                º
echo          ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ECHO.
ECHO            ##############################
ECHO            #    http://www.whydb.org    #
ECHO            ##############################
ECHO.
ECHO Please enter your MySQL Info...
ECHO.
set /p host= MySQL Server Address (e.g. localhost): 
ECHO.
set /p user= MySQL Username: 
set /p pass= MySQL Password: 
ECHO.
SET /p world_db= World Database: 

SET port=3306
SET dumppath=.\dump\
SET mysqlpath=.\mySQL
SET devsql=.\development\ascent_world
SET changsql=.\development\changesets

Where do i change WHYDB_world to World? and do i make ti World_db or just World ?

[pockets08]

and i have read the thread...the question I had were nto answred in here but have been answred via PM. I'll rep you for your reply - as i did recheck the thread and misread a few things.

[psychobandit]

and i have read the thread...the question I had were nto answred in here but have been answred via PM. I'll rep you for your reply - as i did recheck the thread and misread a few things.

Well I hate to say it but you obviously didn't read the thread fully because the question you just asked: "Where do i change WHYDB_world to World?" has been answered repeatedly! and within the last 5 or 6 pages max!



(Pro tip: that part is no longer valid :eh: :wink0
(Por tip #2: generally speaking, you only have to find & read my posts as I am the one who has answered most questions related to what changed/needs to be done since 3.0.9 & they're easy to find because 99% are highlighted in white )
.
.
.

[pockets08]

The SQL address (if your running on the same machine) should be

localhost
SQL username is: root (all lowercase)

password should be: ascent
and for the world database it should be: world


Give that a whirl! so to clarify:

SQL address: localhost
Username: root
Password: ascent (if you followed this guide, change it after your finished setting up your server).
world database: world

-----------

Also, you dont need the updator tool for your character databases.

Take a look here:
http://www.arcemu.info/wiki/index.ph...Database_setup

he answers the question to my current issue - as update.bat is not in arcemu.truck/sql/utilities - the link he gives i tried to understand and i feel a tad retarded..

"Applying SQL updates

Switch to your arc_character database.

Import every file from trunk\sql\character_updates which begins with a number higher than the number of the original structure you imported (the number you remembered earlier).
[edit] Non-Specific Examples
If you used 1_structure.sql; then you'd apply 2_someupdate.sql, 5_otherchange.sql, 8_updates_something.sql, etc.

If you used 5_structure.sql; then you'd apply 8_updates_something.sql.

Switch to your arc_logon database and do the same, but use the files from trunk\sql\logon_updates instead.

Switch to your arc_world database. The release notes for your database probably included the core revision it was made for - this is the number you're looking for. Import all files from trunk\sql\world_updates which begin with a higher number. "

I believe this is the area im too follow at my current step? but im nto 100% sure - on exactly what im doing - do i excute a batch file, as the folder? or each individual mysql file in the char folder or something. im confusing myself lol


EDIT:: By running the character structure sql file - is the character DB done? so do i skip the whole "go to truck/sql/utilities and run ArcEmu db updater" ??

[pockets08]

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host      - The hostname that the database is located on
* LogonDatabase.Username  - The username used for the mysql connection
* LogonDatabase.Password  - The password used for the mysql connection
* LogonDatabase.Name      - The database name
* LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type      - Client to use. 1 = MySQL 
* Not supported:          - 2 = PostgreSQL (Partly implemented)
* Not Supported:          - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
               Username = "root"
               Password = "asa1313"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


/* Host Directive
*
*    This is the address that the realmlist will listen on.
*    To listen on all addresses, set it to 0.0.0.0
*    Default: 127.0.0.1 (localhost)
*
*    Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

/* Server console logging level
*
*    This directive controls how much output the server will
*    display in it's console. Set to 0 for none.
*    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*    Default: 3
*/

<LogLevel Screen = "0"
          File = "-1">

/* Account Refresh Time
*
*    This controls on which time interval accounts gets 
*    refreshed. (In seconds)
*    Default = 600 
*    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*    
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
*    These two directives set up which clients will be
*    allowed to authenticate with the realm list.
*
*    Set these to the same builds that the server was
*    compiled for.
*
*    As of the last update, version 3.1.3 was build 9947.
*/

<Client MinBuild = "11403"
        MaxBuild = "11403">

/* WorldServer Setup
*
*  RemotePassword
*    This directive controls the password used to authenticate with the worldserver.
*    It must be the same between the two configs. If it is not, your server will
*    not register.
*
*    Default: "change_me_logon"
*
*  AllowedIPs
*    This section MUST be completed, otherwise all attempts to link your servers will fail.
*    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
*    to make server connections to your logonserver, and register realms.
*    For example, everything in the 127.0.0.* range would be:
*         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
*    To allow a single IP,
*         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
*  AllowedModIPs
*    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
*    (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "change_me_logon"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">

/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
*   Database.Host      - The hostname that the database is located on
*   Database.Username  - The username used for the mysql connection
*   Database.Password  - The password used for the mysql connection
*   Database.Name      - The database name
*   Database.Port      - Port that MySQL listens on. Usually 3306.
*   Database.Type      - Client to use. 1 = MySQL
*   Not supported:     - 2 = PostgreSQL (Partly implemented)
*   Not Supported:     - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "asa1313" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "asa1313" Name = "char" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
*    Host
*        This is the address that the server will listen on.
*        To listen on all addresses, set it to 0.0.0.0
*        Default: 127.0.0.1 (localhost)
*
*    WorldServerPort
*        This is the port that the world server listens on.
*        It has to be the same as what is specified in the
*        realms table in the LogonDatabase.
*        Default: 8129
*
******************************************************/

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


/******************************************************
* Log Level Setup
*
*    Console Logging Level
*        This directive controls how much output the server will
*        display in it's console. Set to 0 for none, or -1 to disable.
*        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*        Default: 3
*
*    World server packet logging feature
*        If this directive is turned on, a file called `world.log`
*        will be created in the server's directory and all packets
*        sent and received by clients will be dumped here in bfg
*        format.
*        Default: 0
*
*    DisableCrashdumpReport
*        Disables crashdump reports, else if the build has debugging enabled, 
*        arcemu-world will call ./arcemu-crashreport every time it starts, so 
*        if there is a core, a crashdump will automatically be reported 
*        to the tracker at sf.net
*        Needs gdb and curl
*        Linux only
*        Default: 0
*
******************************************************/

<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">


/******************************************************
* Server Settings
*
*    PlayerLimit
*        This directive controls the amount of sessions that will be
*        accepted by the server before it starts to add people to 
*        the server queue.
*        Default: 100
*
*    Motd
*        This message will be displayed by the server in the chat
*        box every time any user logs on. Colors can be used in the
*        standard WoW format.
*        Default: "No MOTD specified
*
*    Send Stats On Join
*        This directive controls whether the server will send the online player
*        count to a cilent when it enters the world.
*
*    Breathing Setup
*        If the breathing code is causing problems or you want to run a fun server, you can disable 
*        water checks by enabling this directive.
*        Default: 1
*
*    Seperate Channels Control
*        This directive controls whether horde and alliance chats will be seperated across channels.
*        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
*        across channels.
*        Default: 0
*
*    Compression Threshold
*        This directive controls the limit when update packets will be compressed using deflate.
*        For lower-bandwidth servers use a lower value at the cost of cpu time.
*        Default: 1000
*
*    Queue Update Rate
*        This directive controls how many milliseconds (ms) between the updates
*        that the queued players receieve telling them their position in the queue.
*        Default: 5000 (5 seconds).
*
*    Kick AFK Players
*        Time in milliseconds (ms) that a player will be kicked after they go afk.
*        Default: 0 (disabled)
*
*    Connection Timeout
*        This directive specifies the amount of seconds that the client will be disconnected
*        after if no ping packet is sent. It is advised to leave it at the default.
*        Default: 180
*
*    Realm Type
*        This is the realm type that will be used by the server to handle world pvp.
*        Default: 0 (pve)(RPPVE)
*        Other values: 1(pvp)(RPPVP)
*
*    AdjustPriority
*        Set the server to high process priority?
*        Default: 0
*
*    RequireAllSignatures
*        This directive controls whether the full 10 signatures will be required in order
*        to turn in a petition. Smaller servers would be better off having it turned off.
*        Default: off
*
*    ShowGMInWhoList
*        This directive controls whether GM's will be shown in player's who lists or not.
*        Default: on
*
*    MapUnloadTime
*        This directive controls whether to unload map cells after an idle period of <x> seconds.
*        Use on smaller servers or servers that are memory-limited. The server without cell unloading
*        can use over 1.2GB memory with all creatures loaded.
*        Default: 0
*
*    LimitedNames
*        This directive forces all character names to be a-z and A-Z compliant.
*        Default: 1
*
*    UseAccountData
*        This directive determines whether the account_data table is used to save custom client data.
*        May cause buggy behaviour.
*        Default: 0
*
*    AllowPlayerCommands
*        This directive, if enabled can allow players to use commands with a '0' command group.
*        Default: 0
*
*    EnableLFGJoin
*        If this is enabled, you can join the LFG channel without using the LFG tool.
*        Default: 0
*
*    TimeZone
*        Set your local timezone relative to GMT here.
*        Default: 0
*
*    Collision
*        Enable collision system (LoS checks).
*        Default: 0
*	 Make sure you have collision.dll in the same folder as arcemu-world!
*
*    DisableFearMovement (In Battlegrounds and Arenas only!)
*        Disable fear movement in arenas & battlegrounds. 
*        Recommended if you do not have collision enabled!
*        Default: 0 (off) Not blizzlike
*
*    SaveExtendedCharData
*        Enable saving extended data to characters table.
*        Recommended for armory type services.
*        Default: 0 (off)
*
******************************************************/

<Server PlayerLimit = "100"
        Motd = "Welcome to an ArcEmu based server!"         
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0"
        LimitedNames="1"
        UseAccountData="0"
        AllowPlayerCommands="0"
        EnableLFGJoin="0"
        TimeZone="0"
        Collision="0"
        DisableFearMovement="0"
        SaveExtendedCharData="0">

/********************************************************
* Announce Configuration
*
*    Tag
*      Configure what is shown in front of your announces in the [] brackets.
*      Default: Staff (would give [Staff])
*
*    GMAdminTag
*      Configure whether the <GM> or <Admin> tag is shown in announces.
*      Default: 0 (disabled)
*
*    NameinAnnounce
*      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
*      Default: 1 (enabled)
*
*    NameinWAnnounce
*      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
*      of the message.
*      Default: 1 (enabled)
*
*    ShowInConsole
*      This controls whether announces are shown in the arcemu-world console or not.
*      This does not apply for the team-internal GM announce.
*      Default: 1 (enabled)
*
********************************************************/
<Announce       Tag = "Staff"
                GMAdminTag = "0"
                NameinAnnounce = "1"
                NameinWAnnounce = "1"
                ShowInConsole = "1">

/******************************************************
* Power regeneration multiplier setup
* 
*    These directives set up the multiplier in which regen values will be
*    multiplied by every 2 seconds.
*    Powers: 
*        Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
*    
*    Reputation:
*        Kill = Rep gained on kill, Quest = rep gained from quests
*
*    Honor:
*        Honor = multiplier used to calculate honor per-kill.
*
*    PvP:
*        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
*        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
*
*    XP:
*        The xp that a player receives from killing a creature will be multiplied
*        by this value in order to get his xp gain.
*
*    RestXP: 
*        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
*        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
*        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
*        Note that resting in a resting area (Zzz) goes 4 times faster.
*        Default: 1 (bubble every 8 hrs)
*
*    Drop(Color):
*        These values will be multiplied by the drop percentages of the items for creatures
*        to determine which items to drop. All default to 1.
*        To allow you better control of drops, separate multipliers have been created for items 
*        of each quality group. 
*
*    DropMoney:
*        This value will be multiplied by any gold looted and pickpocketed
*
*    Save:
*        Value in milliseconds (ms) that will be between player autosaves.
*        Default: 300000 (5 minutes)
* 
*    SkillChance:
*        The chance that you have to level up a skill in melee or a profession is multiplied
*        by this value.
*        Default: 1
*
*    SkillRate:
*        The amount of "levels" your skill goes up each time you gain a level is multiplied
*        by this value.
*
*    ArenaMultiplier
*         Every week/day the arena points gained by a player will be multiplied by this value.
*
******************************************************/

<Rates Health="1"
       Power1="1"
       Power2="1"
       Power3="1"
       Power4="1"
       QuestReputation="1"
       KillReputation="1"
       Honor="1"
       PvPTimer="300000"
       ArenaQueueDiff="150"
       Compression="1"
       XP="1"
       QuestXP="1"
       RestXP="1"
       ExploreXP="1"
       DropGrey="1"
       DropWhite="1"
       DropGreen="1"
       DropBlue="1"
       DropPurple="1"
       DropOrange="1"
       DropArtifact="1"
       DropMoney="1"
       Save="300000"
       SkillChance="1"
       SkillRate="1"
       ArenaMultiplier2x="1"
       ArenaMultiplier3x="1"
       ArenaMultiplier5x="1">


/******************************************************
* GM Client Channel
*
*   This should be set to 'gm_sync_channel' for the My_Master addon to work.
*   Default: gm_sync_channel
*
******************************************************/

<GMClient GmClientChannel = "gm_sync_channel">


/******************************************************
* Terrain & Collision Settings
*
*   Set the path to the map_xx.bin files and whether unloading should be enabled
*   for the main world maps here. Unloading the main world maps when they go idle
*   can save a great amount of memory if the cells aren't being activated/idled
*   often. Instance/Non-main maps will not be unloaded ever.
*
*   Default:
*      MapPath = "maps"
*      vMapPath = "vmaps"
*      UnloadMaps = 1
*
******************************************************/

<Terrain MapPath = "maps"
         vMapPath = "vmaps"
         UnloadMaps = "1">


/******************************************************
* Log Settings
* 
*    Cheaters:
*        This directive sets up the cheater logging file, if turned on any
*        cheat / packet exploit / speedhack attempts will be logged here.
*
*    GMCommands:
*        These two directives set up the GM command logging fie. If turned on,
*        most gm commands will be logged for this file for abuse investigation, etc.
*
*    TimeStamp:
*        Enables timestamps in logs.
*
******************************************************/

<Log Cheaters="0" GMCommands="0" TimeStamp="0">


/******************************************************
* Mail System Setup
*
*    These directives control the limits and behaviour of the ingame mail system.
*    All options must have Mail prefixed before them.
*   
*    ReloadDelay                 
*        Controls the delay at which the database is "refreshed". Use it if you're
*        inserting mail from an external source, such as a web-based interface.
*        0 turns it off.
*        Default: 0
*
*    DisablePostageCostsForGM 
*        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
*        Default: 1
*
*    DisablePostageCosts
*        Disables postage costs for all players.
*        Default: 0
*
*    DisablePostageDelayItems
*        Disables the one hour wait time when sending mail with items attached.
*        Default: 1
*
*    DisableMessageExpiry
*        Turns off the 30 day / 3 day after read message expiry time. 
*        WARNING: A mailbox still cannot show more than 50 items at once
*        (stupid limitation in client).
*        Default: 0
*
*    EnableInterfactionMail
*        Removes the faction limitation for sending mail messages. Applies to all players.
*        Default: 1
*
*    EnableInterfactionMailForGM 
*        Removes the faction limitation for sending mail messages, but only applies
*        to GM's. EnableInterfactionMail overrides this.
*        Default: 1
*   
******************************************************/

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


/******************************************************
* Status Dumper Config
*
*        These directives set up the status dumper plugin. Filename is an
*        absolute or relative path to the server binary. Interval is the
*        time that the stats will be dumped to xml.
*        Default: stats.xml / 120000 (2 minutes)
*
******************************************************/

<StatDumper FileName = "stats.xml" Interval = "120000">


/******************************************************
* Startup Options
*
*    Preloading
*        This directive controls whether the entire world will be spawned at server
*        startup or on demand. It is advised to leave it disabled unless you are a
*        developer doing testing.
*        Default: off
*
*    Background Loot Loading
*        This directive controls whether loot will be loaded progressively during
*        startup or in the background in a seperate thread. Turning it on will
*        result in much faster startup times.
*        Default: on
*
*    Multithreaded Startup
*        This controls whether the server will spawn multiple worker threads to
*        use for loading the database and starting the server. Turning it on
*        increases the speed at which it starts up for each additional cpu in your
*        computer.
*        Default: on
*
*    Additional Table Binding
*        You can load static item/creature/etc data into the server using this directive.
*        This way throughout database updates your custom data can be preserved.
*        Format: "sourcetable destination table,sourcetable destinationtable"
*        Example: "myitems items,mynpcs creature_names"
*        Default: ""
*
******************************************************/

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1"
         LoadAdditionalTables="">

/******************************************************
* Flood Protection Setup
*
*    Lines
*        This is the number of "messages" or lines that it will allow before stopping messages from
*        being sent. This counter is reset every "Seconds" seconds.
*        Default: 0 (disabled)
*
*    Seconds
*        This is the number of seconds inbetween the Line counter being reset.
*        Default: 0 (disabled)
*
*    SendMessage
*        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
*        message will be sent upon flood triggering.
*        Default: 0
*
******************************************************/

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


/******************************************************
* LogonServer Setup
*
*    DisablePings   
*        This directive controls whether pings will be sent to the logonserver to check
*        if the connection is still "alive". Expect problems if it is disabled.
*        Default: 0
*
*    RemotePassword
*        This directive controls the password used to authenticate with the logonserver.
*        It must be the same between the two configs. If it is not, your server will
*        not register.
*
******************************************************/

<LogonServer DisablePings = "0"
             RemotePassword = "change_me_world">


/******************************************************
* AntiHack Setup
* Note: Most of this doesn't work as it should.
*
*    Teleport   
*        This directive controls anti-teleport hack checks will be enabled or not.
*        Default: 1
*
*    Speed
*        This directive controls anti-speed hack checks will be performed on player movement or not.
*        Default: 1
*
*    SpeedThreshold
*        This directive controls the threshold at which the speedhack detection will trip.
*        It's (characters' move time of distance - real move time of distance)
*        Default: -600.0
*
*    FallDamage
*        This directive controls anti-fall damage hack checks will be performed on player movement or not.
*        Default: 1
*
*    Flying
*        This directive controls whether flight hacks will be performed on players or not.
*        Default: 1
*
*    FlightThreshold
*	   This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
*	   Default: 10
*
*    DisableOnGM
*        This directive controls hack checks will be disabled for GM's or not.
*        Default: 0
*
******************************************************/

<AntiHack Teleport="1"
          Speed="1"
          FallDamage="1"
          Flight="1"
	  FlightThreshold="10" 
          DisableOnGM="1">


/******************************************************
* Period Setup
*
*    These are the periods that the server will wait before doing periodic duties. At the moment only
*    arena point calculation and honor point calculation are used here.
*
*    Default:
*         Arena: weekly
*         Honor: daily
*             (blizzlike values)
*
******************************************************/

<Periods HonorUpdate="daily"
         ArenaUpdate="weekly"
         DailyUpdate="daily">


/******************************************************
* Channels Setup
*
*    These directives control some of the aspects in the channel system.
*
*    BannedChannels
*         If you would like to ban users from creating or joining a channel specify them here in a ';'
*         seperated list.
*         Default: ""
*
*    MinimumLevel
*	  Channel names that require a minimum level of 10 to talk, seperate names by ;
*	  Default: ""
*
*
******************************************************/

<Channels BannedChannels=""
          MinimumLevel="">


/******************************************************
* VoiceChat Setup
*
*    These directives control some of the aspects in the voice chat system.
*
*    Enabled
*         If you want to enable the voice chat system, this must be set to 1.
*         Default: "0"
*
*    ServerIP
*         This is the IP of the voice chat server.
*         Default: "127.0.0.1"
*
*    ServerPort
*         This is the TCP port of the voice chat server.
*         Default: "3727"
*
******************************************************/

<VoiceChat Enabled="0"
           ServerIP="127.0.0.1"
           ServerPort="3727">


/******************************************************
* Remote Console Setup
*
*    These directives control the remote administration console.
*
*    Enabled
*         If you want to enable the remote administration console, set this.
*         Default: 0
*
*    Host
*         This is the interface the RA server listens on.
*         Default: "0.0.0.0"
*
*    Port
*         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
*         Default: 8092
*
******************************************************/

<RemoteConsole Enabled="0"
               Host="0.0.0.0"
               Port="8092">
      

/******************************************************
* Scripting Engine Setup
*
*    ArcEmu can support multiple script backends via the means of loading .dll files for them.
*    This section in the config can enable/disable those backends.
*
*    LUA
*         If you would like to enable the LUA scripting backend, enable this.
*         Default: 0
*
******************************************************/

<ScriptBackends LUA="1">


/******************************************************
* Movement Setup
*
*    NOTE: For any of these directives to function, movement compression has to be compiled into
*          the server.
*
*    FlushInterval
*        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
*        If you have a high threshold, keeping this at 1-2 seconds will work better.
*        Default: 1000 (one second)
*
*    CompressionRate
*        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
*        Range: 1-9 (or 0 is disable)
*        Default: 1
*
*    CompressionThreshold
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. It is advised to keep it at least 30 units. This value is used for players.
*        Default: 30.0
*
*    CompressionThresholdCreatures
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. This value is used for creatures, so it can be a lot lower.
*        Default: 10.0
*
******************************************************/

<Movement FlushInterval="1000"
          CompressRate="1"
          CompressThreshold="30.0"
          CompressThresholdCreatures="10.0">


/******************************************************
* Localization Setup
*
*    LocaleBindings
*        This is a list of locale names and the other locale you want to associate with them.
*        For example, to make the European client always use the french language, "enGB=frFR"
*
*        Must be terminated by a space.
*
*        Default: ""
*
******************************************************/

<Localization LocaleBindings="">


/******************************************************
* Dungeon / Instance Setup
*
*    TakeGroupLeaderID
*        If a player doesn't have an instance id, the group isn't already assigned
*        to an instance and the group or raid leader already have one, the player will
*        be bound to the instance id of the group/raid leader.
*        Default: 1 (enabled)
*
*    SlidingExpiration
*        If enabled, persistent instances will expire relative to the creation time.
*        Otherwise persistent instances will expire at fixed points of time. (blizz like)
*        Default: 0 (disabled)
*
*    DailyHeroicInstanceResetHour
*        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
*        Default: 5
*
*    CheckTriggerPrerequsites
*        Entering & checks
*        Default: 1
******************************************************/

<InstanceHandling TakeGroupLeaderID="1" 
                  SlidingExpiration="0" 
                  DailyHeroicInstanceResetHour="5" 
                  CheckTriggerPrerequsites="1" >


/******************************************************
* BattleGround settings
* Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
*
*    AlteracValley
*    AV_MIN
*    AV_MAX
*
*    ArathiBasin
*    AB_MIN
*    AB_MAX
*
*    WarSong
*    WS_MIN
*    WS_MAX
*
*    Eyes Of The Storm.
*    EOS_MIN
*    EOS_MAX
*
******************************************************/
<Battleground AV_MIN="0"
              AV_MAX="40"
              AB_MIN="4"
              AB_MAX="15"
              EOS_MIN="4"
              EOS_MAX="15"
              WS_MIN="2"
              WS_MAX="10"
              SOTA_MIN="10"
              SOTA_MAX="15">

/*****************************************************
*    Arena Settings
*
*    Allows you to control current season and its progress.
*
*     Season - has to be higher than 0 for arenas to work.
*     Progress - sets the progress, 0 = finished, 1 = in progress
*
*****************************************************/
<Arena Season = "5"
       Progress = "1">

/*****************************************************
*    StartOnGMIsland
*
*     Makes GM Characters start on GM Island
*
*     Also sets their bind location to GM Island
*     Default:1 (Yes)
*
*****************************************************/
<GameMaster StartOnGMIsland = "1">

/*****************************************************
* Limits settings
*
*    Enable
*        Enable damage/hp/mana caps
*        Default value: 1 (enabled)
*    AutoAttackDmg
*        Maximum damage allowed for auto-attack (swing)
*        Default value: 10000
*    SpellDmg
*        Maximum damage allowed for a spell
*        Default value: 30000
*    Health
*        Maximum health allowed for a player
*        Default value: 100000
*    Mana
*        Maximum mana allowed for a player
*        Default value: 80000
*    Disconnect
*        Disconnect player that exceeds limits above
*        Default value: 0 (disabled)
*    BroadcastGMs
*        Broadcast a message to online GMs when max damage/hp/mana has been exceeded (possible cheating)
*        Default value: 1 (on)
*
* Set any of the values above to 0 to disable that setting (for example, set SpellDmg="0" to disable only spell damage limit)
*
*****************************************************/

<Limits Enable="1" AutoAttackDmg="10000" SpellDmg="30000" Health="100000" Mana="80000" Disconnect="0" BroadcastGMs="1">

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
*    Address:
*      The address (no port) of the server.
*
*    Port:
*      The port on which the logon server listens. (*** NOT 3724 ***)
*
*    Name:
*      Not really relavant, but name the logon.
*
*    RealmCount:
*      The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "127.0.0.1"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

/******************************************************
* Realm Section
*
*    Name:
*      The name of the realm.
*    
*    Address:
*      The address (and port) of that realm.
*
*    Icon:
*      The type of realm (PVP, Normal, RPPVP, RP)
*
*    TimeZone:
*      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
*       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
*    Population:
*      (0 = low, 1 = medium, 2 = high)
*
*   Important information below
*
*     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
*     This issues come up a lot!
*
* 	Timezone values :
*	0=Korean                                16=China
*	1=Development				17=CN1
*	2=United States				18=CN2
*	3=Oceanic				19=CN3
*	4=Latin America				20=CN4
*	5=Tournament				21=CN5
*	6=Korean				22=CN6
*	8=English				23=CN7
*	9=German				24=CN8
*	10=French				25=Tournament
*	11=Spanish				26=Test Server
*	12=Russian				27=Tournament
*	13=Tournament				28=QA Server
*	14=Taiwan				29=CN9
*	15=Tournament				30=TestServer2
******************************************************/

<Realm1 Name = "Test Realm"
	Address = "127.0.0.1:8129" 
	Icon = "PVP"
	Population = "1.0"
	TimeZone = "1">

I keep getting an error that says "Authentification request from 127.0.0.1, result Fail" "Key: *buncha letters*" - im assuming i did the config incorrectly. also - just to make sure. im to change th config settings in teh SERVERS folder, not arcemu's folder, correct?

[psychobandit]

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host      - The hostname that the database is located on
* LogonDatabase.Username  - The username used for the mysql connection
* LogonDatabase.Password  - The password used for the mysql connection
* LogonDatabase.Name      - The database name
* LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type      - Client to use. 1 = MySQL 
* Not supported:          - 2 = PostgreSQL (Partly implemented)
* Not Supported:          - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
               Username = "root"
               Password = "asa1313"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


/* Host Directive
*
*    This is the address that the realmlist will listen on.
*    To listen on all addresses, set it to 0.0.0.0
*    Default: 127.0.0.1 (localhost)
*
*    Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

/* Server console logging level
*
*    This directive controls how much output the server will
*    display in it's console. Set to 0 for none.
*    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*    Default: 3
*/

<LogLevel Screen = "0"
          File = "-1">

/* Account Refresh Time
*
*    This controls on which time interval accounts gets 
*    refreshed. (In seconds)
*    Default = 600 
*    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*    
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
*    These two directives set up which clients will be
*    allowed to authenticate with the realm list.
*
*    Set these to the same builds that the server was
*    compiled for.
*
*    As of the last update, version 3.1.3 was build 9947.
*/

<Client MinBuild = "11403"
        MaxBuild = "11403">

/* WorldServer Setup
*
*  RemotePassword
*    This directive controls the password used to authenticate with the worldserver.
*    It must be the same between the two configs. If it is not, your server will
*    not register.
*
*    Default: "change_me_logon"
*
*  AllowedIPs
*    This section MUST be completed, otherwise all attempts to link your servers will fail.
*    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
*    to make server connections to your logonserver, and register realms.
*    For example, everything in the 127.0.0.* range would be:
*         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
*    To allow a single IP,
*         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
*  AllowedModIPs
*    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
*    (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "change_me_logon"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">

/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
*   Database.Host      - The hostname that the database is located on
*   Database.Username  - The username used for the mysql connection
*   Database.Password  - The password used for the mysql connection
*   Database.Name      - The database name
*   Database.Port      - Port that MySQL listens on. Usually 3306.
*   Database.Type      - Client to use. 1 = MySQL
*   Not supported:     - 2 = PostgreSQL (Partly implemented)
*   Not Supported:     - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "asa1313" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "asa1313" Name = "char" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
*    Host
*        This is the address that the server will listen on.
*        To listen on all addresses, set it to 0.0.0.0
*        Default: 127.0.0.1 (localhost)
*
*    WorldServerPort
*        This is the port that the world server listens on.
*        It has to be the same as what is specified in the
*        realms table in the LogonDatabase.
*        Default: 8129
*
******************************************************/

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


/******************************************************
* Log Level Setup
*
*    Console Logging Level
*        This directive controls how much output the server will
*        display in it's console. Set to 0 for none, or -1 to disable.
*        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*        Default: 3
*
*    World server packet logging feature
*        If this directive is turned on, a file called `world.log`
*        will be created in the server's directory and all packets
*        sent and received by clients will be dumped here in bfg
*        format.
*        Default: 0
*
*    DisableCrashdumpReport
*        Disables crashdump reports, else if the build has debugging enabled, 
*        arcemu-world will call ./arcemu-crashreport every time it starts, so 
*        if there is a core, a crashdump will automatically be reported 
*        to the tracker at sf.net
*        Needs gdb and curl
*        Linux only
*        Default: 0
*
******************************************************/

<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">


/******************************************************
* Server Settings
*
*    PlayerLimit
*        This directive controls the amount of sessions that will be
*        accepted by the server before it starts to add people to 
*        the server queue.
*        Default: 100
*
*    Motd
*        This message will be displayed by the server in the chat
*        box every time any user logs on. Colors can be used in the
*        standard WoW format.
*        Default: "No MOTD specified
*
*    Send Stats On Join
*        This directive controls whether the server will send the online player
*        count to a cilent when it enters the world.
*
*    Breathing Setup
*        If the breathing code is causing problems or you want to run a fun server, you can disable 
*        water checks by enabling this directive.
*        Default: 1
*
*    Seperate Channels Control
*        This directive controls whether horde and alliance chats will be seperated across channels.
*        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
*        across channels.
*        Default: 0
*
*    Compression Threshold
*        This directive controls the limit when update packets will be compressed using deflate.
*        For lower-bandwidth servers use a lower value at the cost of cpu time.
*        Default: 1000
*
*    Queue Update Rate
*        This directive controls how many milliseconds (ms) between the updates
*        that the queued players receieve telling them their position in the queue.
*        Default: 5000 (5 seconds).
*
*    Kick AFK Players
*        Time in milliseconds (ms) that a player will be kicked after they go afk.
*        Default: 0 (disabled)
*
*    Connection Timeout
*        This directive specifies the amount of seconds that the client will be disconnected
*        after if no ping packet is sent. It is advised to leave it at the default.
*        Default: 180
*
*    Realm Type
*        This is the realm type that will be used by the server to handle world pvp.
*        Default: 0 (pve)(RPPVE)
*        Other values: 1(pvp)(RPPVP)
*
*    AdjustPriority
*        Set the server to high process priority?
*        Default: 0
*
*    RequireAllSignatures
*        This directive controls whether the full 10 signatures will be required in order
*        to turn in a petition. Smaller servers would be better off having it turned off.
*        Default: off
*
*    ShowGMInWhoList
*        This directive controls whether GM's will be shown in player's who lists or not.
*        Default: on
*
*    MapUnloadTime
*        This directive controls whether to unload map cells after an idle period of <x> seconds.
*        Use on smaller servers or servers that are memory-limited. The server without cell unloading
*        can use over 1.2GB memory with all creatures loaded.
*        Default: 0
*
*    LimitedNames
*        This directive forces all character names to be a-z and A-Z compliant.
*        Default: 1
*
*    UseAccountData
*        This directive determines whether the account_data table is used to save custom client data.
*        May cause buggy behaviour.
*        Default: 0
*
*    AllowPlayerCommands
*        This directive, if enabled can allow players to use commands with a '0' command group.
*        Default: 0
*
*    EnableLFGJoin
*        If this is enabled, you can join the LFG channel without using the LFG tool.
*        Default: 0
*
*    TimeZone
*        Set your local timezone relative to GMT here.
*        Default: 0
*
*    Collision
*        Enable collision system (LoS checks).
*        Default: 0
*	 Make sure you have collision.dll in the same folder as arcemu-world!
*
*    DisableFearMovement (In Battlegrounds and Arenas only!)
*        Disable fear movement in arenas & battlegrounds. 
*        Recommended if you do not have collision enabled!
*        Default: 0 (off) Not blizzlike
*
*    SaveExtendedCharData
*        Enable saving extended data to characters table.
*        Recommended for armory type services.
*        Default: 0 (off)
*
******************************************************/

<Server PlayerLimit = "100"
        Motd = "Welcome to an ArcEmu based server!"         
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0"
        LimitedNames="1"
        UseAccountData="0"
        AllowPlayerCommands="0"
        EnableLFGJoin="0"
        TimeZone="0"
        Collision="0"
        DisableFearMovement="0"
        SaveExtendedCharData="0">

/********************************************************
* Announce Configuration
*
*    Tag
*      Configure what is shown in front of your announces in the [] brackets.
*      Default: Staff (would give [Staff])
*
*    GMAdminTag
*      Configure whether the <GM> or <Admin> tag is shown in announces.
*      Default: 0 (disabled)
*
*    NameinAnnounce
*      If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
*      Default: 1 (enabled)
*
*    NameinWAnnounce
*      If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
*      of the message.
*      Default: 1 (enabled)
*
*    ShowInConsole
*      This controls whether announces are shown in the arcemu-world console or not.
*      This does not apply for the team-internal GM announce.
*      Default: 1 (enabled)
*
********************************************************/
<Announce       Tag = "Staff"
                GMAdminTag = "0"
                NameinAnnounce = "1"
                NameinWAnnounce = "1"
                ShowInConsole = "1">

/******************************************************
* Power regeneration multiplier setup
* 
*    These directives set up the multiplier in which regen values will be
*    multiplied by every 2 seconds.
*    Powers: 
*        Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
*    
*    Reputation:
*        Kill = Rep gained on kill, Quest = rep gained from quests
*
*    Honor:
*        Honor = multiplier used to calculate honor per-kill.
*
*    PvP:
*        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
*        ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
*
*    XP:
*        The xp that a player receives from killing a creature will be multiplied
*        by this value in order to get his xp gain.
*
*    RestXP: 
*        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
*        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
*        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
*        Note that resting in a resting area (Zzz) goes 4 times faster.
*        Default: 1 (bubble every 8 hrs)
*
*    Drop(Color):
*        These values will be multiplied by the drop percentages of the items for creatures
*        to determine which items to drop. All default to 1.
*        To allow you better control of drops, separate multipliers have been created for items 
*        of each quality group. 
*
*    DropMoney:
*        This value will be multiplied by any gold looted and pickpocketed
*
*    Save:
*        Value in milliseconds (ms) that will be between player autosaves.
*        Default: 300000 (5 minutes)
* 
*    SkillChance:
*        The chance that you have to level up a skill in melee or a profession is multiplied
*        by this value.
*        Default: 1
*
*    SkillRate:
*        The amount of "levels" your skill goes up each time you gain a level is multiplied
*        by this value.
*
*    ArenaMultiplier
*         Every week/day the arena points gained by a player will be multiplied by this value.
*
******************************************************/

<Rates Health="1"
       Power1="1"
       Power2="1"
       Power3="1"
       Power4="1"
       QuestReputation="1"
       KillReputation="1"
       Honor="1"
       PvPTimer="300000"
       ArenaQueueDiff="150"
       Compression="1"
       XP="1"
       QuestXP="1"
       RestXP="1"
       ExploreXP="1"
       DropGrey="1"
       DropWhite="1"
       DropGreen="1"
       DropBlue="1"
       DropPurple="1"
       DropOrange="1"
       DropArtifact="1"
       DropMoney="1"
       Save="300000"
       SkillChance="1"
       SkillRate="1"
       ArenaMultiplier2x="1"
       ArenaMultiplier3x="1"
       ArenaMultiplier5x="1">


/******************************************************
* GM Client Channel
*
*   This should be set to 'gm_sync_channel' for the My_Master addon to work.
*   Default: gm_sync_channel
*
******************************************************/

<GMClient GmClientChannel = "gm_sync_channel">


/******************************************************
* Terrain & Collision Settings
*
*   Set the path to the map_xx.bin files and whether unloading should be enabled
*   for the main world maps here. Unloading the main world maps when they go idle
*   can save a great amount of memory if the cells aren't being activated/idled
*   often. Instance/Non-main maps will not be unloaded ever.
*
*   Default:
*      MapPath = "maps"
*      vMapPath = "vmaps"
*      UnloadMaps = 1
*
******************************************************/

<Terrain MapPath = "maps"
         vMapPath = "vmaps"
         UnloadMaps = "1">


/******************************************************
* Log Settings
* 
*    Cheaters:
*        This directive sets up the cheater logging file, if turned on any
*        cheat / packet exploit / speedhack attempts will be logged here.
*
*    GMCommands:
*        These two directives set up the GM command logging fie. If turned on,
*        most gm commands will be logged for this file for abuse investigation, etc.
*
*    TimeStamp:
*        Enables timestamps in logs.
*
******************************************************/

<Log Cheaters="0" GMCommands="0" TimeStamp="0">


/******************************************************
* Mail System Setup
*
*    These directives control the limits and behaviour of the ingame mail system.
*    All options must have Mail prefixed before them.
*   
*    ReloadDelay                 
*        Controls the delay at which the database is "refreshed". Use it if you're
*        inserting mail from an external source, such as a web-based interface.
*        0 turns it off.
*        Default: 0
*
*    DisablePostageCostsForGM 
*        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
*        Default: 1
*
*    DisablePostageCosts
*        Disables postage costs for all players.
*        Default: 0
*
*    DisablePostageDelayItems
*        Disables the one hour wait time when sending mail with items attached.
*        Default: 1
*
*    DisableMessageExpiry
*        Turns off the 30 day / 3 day after read message expiry time. 
*        WARNING: A mailbox still cannot show more than 50 items at once
*        (stupid limitation in client).
*        Default: 0
*
*    EnableInterfactionMail
*        Removes the faction limitation for sending mail messages. Applies to all players.
*        Default: 1
*
*    EnableInterfactionMailForGM 
*        Removes the faction limitation for sending mail messages, but only applies
*        to GM's. EnableInterfactionMail overrides this.
*        Default: 1
*   
******************************************************/

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


/******************************************************
* Status Dumper Config
*
*        These directives set up the status dumper plugin. Filename is an
*        absolute or relative path to the server binary. Interval is the
*        time that the stats will be dumped to xml.
*        Default: stats.xml / 120000 (2 minutes)
*
******************************************************/

<StatDumper FileName = "stats.xml" Interval = "120000">


/******************************************************
* Startup Options
*
*    Preloading
*        This directive controls whether the entire world will be spawned at server
*        startup or on demand. It is advised to leave it disabled unless you are a
*        developer doing testing.
*        Default: off
*
*    Background Loot Loading
*        This directive controls whether loot will be loaded progressively during
*        startup or in the background in a seperate thread. Turning it on will
*        result in much faster startup times.
*        Default: on
*
*    Multithreaded Startup
*        This controls whether the server will spawn multiple worker threads to
*        use for loading the database and starting the server. Turning it on
*        increases the speed at which it starts up for each additional cpu in your
*        computer.
*        Default: on
*
*    Additional Table Binding
*        You can load static item/creature/etc data into the server using this directive.
*        This way throughout database updates your custom data can be preserved.
*        Format: "sourcetable destination table,sourcetable destinationtable"
*        Example: "myitems items,mynpcs creature_names"
*        Default: ""
*
******************************************************/

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1"
         LoadAdditionalTables="">

/******************************************************
* Flood Protection Setup
*
*    Lines
*        This is the number of "messages" or lines that it will allow before stopping messages from
*        being sent. This counter is reset every "Seconds" seconds.
*        Default: 0 (disabled)
*
*    Seconds
*        This is the number of seconds inbetween the Line counter being reset.
*        Default: 0 (disabled)
*
*    SendMessage
*        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
*        message will be sent upon flood triggering.
*        Default: 0
*
******************************************************/

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


/******************************************************
* LogonServer Setup
*
*    DisablePings   
*        This directive controls whether pings will be sent to the logonserver to check
*        if the connection is still "alive". Expect problems if it is disabled.
*        Default: 0
*
*    RemotePassword
*        This directive controls the password used to authenticate with the logonserver.
*        It must be the same between the two configs. If it is not, your server will
*        not register.
*
******************************************************/

<LogonServer DisablePings = "0"
             RemotePassword = "change_me_world">


/******************************************************
* AntiHack Setup
* Note: Most of this doesn't work as it should.
*
*    Teleport   
*        This directive controls anti-teleport hack checks will be enabled or not.
*        Default: 1
*
*    Speed
*        This directive controls anti-speed hack checks will be performed on player movement or not.
*        Default: 1
*
*    SpeedThreshold
*        This directive controls the threshold at which the speedhack detection will trip.
*        It's (characters' move time of distance - real move time of distance)
*        Default: -600.0
*
*    FallDamage
*        This directive controls anti-fall damage hack checks will be performed on player movement or not.
*        Default: 1
*
*    Flying
*        This directive controls whether flight hacks will be performed on players or not.
*        Default: 1
*
*    FlightThreshold
*	   This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
*	   Default: 10
*
*    DisableOnGM
*        This directive controls hack checks will be disabled for GM's or not.
*        Default: 0
*
******************************************************/

<AntiHack Teleport="1"
          Speed="1"
          FallDamage="1"
          Flight="1"
	  FlightThreshold="10" 
          DisableOnGM="1">


/******************************************************
* Period Setup
*
*    These are the periods that the server will wait before doing periodic duties. At the moment only
*    arena point calculation and honor point calculation are used here.
*
*    Default:
*         Arena: weekly
*         Honor: daily
*             (blizzlike values)
*
******************************************************/

<Periods HonorUpdate="daily"
         ArenaUpdate="weekly"
         DailyUpdate="daily">


/******************************************************
* Channels Setup
*
*    These directives control some of the aspects in the channel system.
*
*    BannedChannels
*         If you would like to ban users from creating or joining a channel specify them here in a ';'
*         seperated list.
*         Default: ""
*
*    MinimumLevel
*	  Channel names that require a minimum level of 10 to talk, seperate names by ;
*	  Default: ""
*
*
******************************************************/

<Channels BannedChannels=""
          MinimumLevel="">


/******************************************************
* VoiceChat Setup
*
*    These directives control some of the aspects in the voice chat system.
*
*    Enabled
*         If you want to enable the voice chat system, this must be set to 1.
*         Default: "0"
*
*    ServerIP
*         This is the IP of the voice chat server.
*         Default: "127.0.0.1"
*
*    ServerPort
*         This is the TCP port of the voice chat server.
*         Default: "3727"
*
******************************************************/

<VoiceChat Enabled="0"
           ServerIP="127.0.0.1"
           ServerPort="3727">


/******************************************************
* Remote Console Setup
*
*    These directives control the remote administration console.
*
*    Enabled
*         If you want to enable the remote administration console, set this.
*         Default: 0
*
*    Host
*         This is the interface the RA server listens on.
*         Default: "0.0.0.0"
*
*    Port
*         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
*         Default: 8092
*
******************************************************/

<RemoteConsole Enabled="0"
               Host="0.0.0.0"
               Port="8092">
      

/******************************************************
* Scripting Engine Setup
*
*    ArcEmu can support multiple script backends via the means of loading .dll files for them.
*    This section in the config can enable/disable those backends.
*
*    LUA
*         If you would like to enable the LUA scripting backend, enable this.
*         Default: 0
*
******************************************************/

<ScriptBackends LUA="1">


/******************************************************
* Movement Setup
*
*    NOTE: For any of these directives to function, movement compression has to be compiled into
*          the server.
*
*    FlushInterval
*        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
*        If you have a high threshold, keeping this at 1-2 seconds will work better.
*        Default: 1000 (one second)
*
*    CompressionRate
*        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
*        Range: 1-9 (or 0 is disable)
*        Default: 1
*
*    CompressionThreshold
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. It is advised to keep it at least 30 units. This value is used for players.
*        Default: 30.0
*
*    CompressionThresholdCreatures
*        This is the distance that will be used to determine if an object needs to be sent compressed or
*        normal. This value is used for creatures, so it can be a lot lower.
*        Default: 10.0
*
******************************************************/

<Movement FlushInterval="1000"
          CompressRate="1"
          CompressThreshold="30.0"
          CompressThresholdCreatures="10.0">


/******************************************************
* Localization Setup
*
*    LocaleBindings
*        This is a list of locale names and the other locale you want to associate with them.
*        For example, to make the European client always use the french language, "enGB=frFR"
*
*        Must be terminated by a space.
*
*        Default: ""
*
******************************************************/

<Localization LocaleBindings="">


/******************************************************
* Dungeon / Instance Setup
*
*    TakeGroupLeaderID
*        If a player doesn't have an instance id, the group isn't already assigned
*        to an instance and the group or raid leader already have one, the player will
*        be bound to the instance id of the group/raid leader.
*        Default: 1 (enabled)
*
*    SlidingExpiration
*        If enabled, persistent instances will expire relative to the creation time.
*        Otherwise persistent instances will expire at fixed points of time. (blizz like)
*        Default: 0 (disabled)
*
*    DailyHeroicInstanceResetHour
*        Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
*        Default: 5
*
*    CheckTriggerPrerequsites
*        Entering & checks
*        Default: 1
******************************************************/

<InstanceHandling TakeGroupLeaderID="1" 
                  SlidingExpiration="0" 
                  DailyHeroicInstanceResetHour="5" 
                  CheckTriggerPrerequsites="1" >


/******************************************************
* BattleGround settings
* Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
*
*    AlteracValley
*    AV_MIN
*    AV_MAX
*
*    ArathiBasin
*    AB_MIN
*    AB_MAX
*
*    WarSong
*    WS_MIN
*    WS_MAX
*
*    Eyes Of The Storm.
*    EOS_MIN
*    EOS_MAX
*
******************************************************/
<Battleground AV_MIN="0"
              AV_MAX="40"
              AB_MIN="4"
              AB_MAX="15"
              EOS_MIN="4"
              EOS_MAX="15"
              WS_MIN="2"
              WS_MAX="10"
              SOTA_MIN="10"
              SOTA_MAX="15">

/*****************************************************
*    Arena Settings
*
*    Allows you to control current season and its progress.
*
*     Season - has to be higher than 0 for arenas to work.
*     Progress - sets the progress, 0 = finished, 1 = in progress
*
*****************************************************/
<Arena Season = "5"
       Progress = "1">

/*****************************************************
*    StartOnGMIsland
*
*     Makes GM Characters start on GM Island
*
*     Also sets their bind location to GM Island
*     Default:1 (Yes)
*
*****************************************************/
<GameMaster StartOnGMIsland = "1">

/*****************************************************
* Limits settings
*
*    Enable
*        Enable damage/hp/mana caps
*        Default value: 1 (enabled)
*    AutoAttackDmg
*        Maximum damage allowed for auto-attack (swing)
*        Default value: 10000
*    SpellDmg
*        Maximum damage allowed for a spell
*        Default value: 30000
*    Health
*        Maximum health allowed for a player
*        Default value: 100000
*    Mana
*        Maximum mana allowed for a player
*        Default value: 80000
*    Disconnect
*        Disconnect player that exceeds limits above
*        Default value: 0 (disabled)
*    BroadcastGMs
*        Broadcast a message to online GMs when max damage/hp/mana has been exceeded (possible cheating)
*        Default value: 1 (on)
*
* Set any of the values above to 0 to disable that setting (for example, set SpellDmg="0" to disable only spell damage limit)
*
*****************************************************/

<Limits Enable="1" AutoAttackDmg="10000" SpellDmg="30000" Health="100000" Mana="80000" Disconnect="0" BroadcastGMs="1">

(deleted to save space)

I keep getting an error that says "Authentification request from 127.0.0.1, result Fail" "Key: *buncha letters*" - im assuming i did the config incorrectly. also - just to make sure. im to change th config settings in teh SERVERS folder, not arcemu's folder, correct?

Man....every single post you write, all I see is blatant You are not reading anything we tell you too, or you're not following very simple instructions! If you had read all the posts I have told you more than once to read, you'd have the answer to every single question you have asked so far! It's making it extremely difficult for me to want to help you as you won't even help your self!
Again, in your configs, you failed to read very simple instructions. I have highlighted in red what you should have read, & what you have to change to fix this, Just look at the 2 configs I left & scroll until you see the red parts (and yes, the ones in server folder, not arcemu folder).
And if you are wondering why those passwords are in the configs & why they are different, it is intentional! the Developers were ever so tired of idiots who wouldn't read anything & expected the developers to do ALL the work for them! So they put in some code that, if you don't read & follow directions, the server wont work.
.
.
.

[pockets08]

i have read all 26 posts, and saw one perosn with config errors, in which u put in red - I followed that thread, and it still did not work. I followed this thread, and i still get the error. I am carrying on to another thread, appreciate the help - but i have read all 26 pages, very carefully, even the repeated questions u repeatidly answers and repeatidly respond to as "read the thread" as an answer - i have also read. I fixed the LIB . DLL error, by reading this thread, - when i have a issue, i have read this thread before posting. ive had over 18 issues in which were answered by re reads - the ones i have asked you, i did not find, or may have passed up. sorry for the hassle. help was appreciated eithier way.

[psychobandit]

i have read all 26 posts, and saw one perosn with config errors, in which u put in red - I followed that thread, and it still did not work. I followed this thread, and i still get the error. I am carrying on to another thread, appreciate the help - but i have read all 26 pages, very carefully, even the repeated questions u repeatidly answers and repeatidly respond to as "read the thread" as an answer - i have also read. I fixed the LIB . DLL error, by reading this thread, - when i have a issue, i have read this thread before posting. ive had over 18 issues in which were answered by re reads - the ones i have asked you, i did not find, or may have passed up. sorry for the hassle. help was appreciated eithier way.

O.K.....I'm getting really mad @ MMowned now.....twice, it has erased what I have written when it logs me back in because it keeps logging me out 'cause I took too long typing......I am not writing it again, It was basically an explanation of how you keep proving to me that your either not really reading, or you just don't understand it. But the simple example was, you just said there is only 1 set of configs I corrected when there is in fact 2, & on the previous page (where one set of corrected is) there is also a set I did not correct that you could easily compare to yours to see if you missed anything. There was only one thing wrong with that set & I show the correction like 4 posts down.
Anyway, I don't want to type it all again, just know I have a very good reason for being the way I am being.....if you've read all my posts, you'd know I am pretty nice & helpful.
Anyway, I have no problem helping you, It's what I do, but you are going to have to give me a lot more to go on than just "authentication error, some key blablabla". I am going to need screenshots of the logonserver, worldserver, error messages & all.
You may also want to start from scratch. I don't mean delete everything, but go back to the 1st page & go through everything in the guide. Yes there are things wrong with it, but if you followed it, you should not have anywhere NEAR as many problems as you are having, so you must have missed something.
I also need to know what programs you are using, like Visual studio express? full version? Navicat? heideSQL? MySQL? full version or ????

and ya, I am so annoyed with mmowned, I'm not even changing my words to white
I will also go back & read your configs one more time checking everything, but except for the password problem I already told you about, I think they're fine so that's not where the problem is.

*edit* o.k., I went through the configs again, you did change both "remote password" in the 2 configs to the same password? single word, no spaces. I have never tried a combination of alphanumerics but just like your main PW, it should work fine. The only other thing I would change is in your realm config where it says "Test Realm", if you don't want to name your realm that is fine, but take the space out (testrealm, not test realm). Sometimes it's bitchy about spaces. That wont cause the "authent" error but it should be changed anyway.

[pockets08]

Im sorry for all the mishaps in my reading Ive gone through thins a few times jumping around trying to skip around repeat questions - orwhatnot. but anyway.

I figure maybe I coudl ask you - since no one is helping on this other thread i was reading : http://www.mmowned.com/forums/emulat...u-3-3-2-a.html

he explains how to ocmpile a arcemu 3.3.2 whichis what i was doing - and he says to run a clean solution - which i did, but if u go down and rea dmy issue - i didnt get ANY of the dll files, the arcemu.exe or anythin like that - just yell at me if that was an issue here and ill look through again - i just dont wanna do it atm ... lol