[Help] Allowed IP Trouble

[Skinzor]

I've searched the forum and can't seem to find much help with the problem I'm having. So here it is:

I can connect to my server just fine in WoW but when I select the realm from the list it auto-disconnects me. When I take a look at my logonserver.exe I see this:


Here is my logonserver.conf:

#######################################################################
# OpenAscent Realms Configuration File  
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "xxxxx"
               Username = "xxxxx"
               Password = "xxxxx"
               Name     = "xxxx_alogon"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8129">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "8089"
        MaxBuild = "9999">

# WorldServer Setup
#
#  RemotePassword
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#
#  AllowedIPs
#    This section MUST be completed, otherwise all attempts to link your servers will fail.
#    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
#    to make server connections to your logonserver, and register realms.
#    For example, everything in the 127.0.0.* range would be:
#         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
#    To allow a single IP,
#         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
#  AllowedModIPs
#    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
#    (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "apple"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">

And here's my realm.conf:

#######################################################################
# OpenAscent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
             Port = "8129"
             Name = "Skins WoW"
             RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Skins Realm"
        Address = "skins.servegame.org:8129"
        Icon = "PVP"
        Population = "1.0"
        TimeZone = "1">

Also, with that allowed IP thing, if I can't connect to my server, can other people?

[Ickybad]

You can leave it 127.0.0.1/24.

[Skinzor]

Yeah but even when I have that at 127.0.0.1/24 I can't even connect to the realm, it says my IP is "denied, not an allowed IP"

[Ickybad]

Well the rest of th configs matter to I think you can leave everything 127.0.0.1 and 0.0.0.0 but the Address at the bottom of the realms config and you can be live.

[Skinzor]

Just checked through all the config files and everything is set to 127.0.0.1 already. The only thing I dont have at 127.0.0.1 is the realm address at the bottom realm.conf.

Also, does it make a difference in the configs if my databases are online and arent on my computer? Does that change any of the 127.0.0.1's besides the one's that are database addresses which I already have changed?

[TheSpidey]

Picture says the host is 192.168.15.100, use it :P