LAZYBOT support thread, Q&A, requests and updates

[jumperu]

I still have an issue where I've tried using both the balance druid combat behavior engines listed on the first page, along with a grinding path I've created myself. It seems to work "ok" - except some of the spells are not being fired, most noticeably rejuv and healing touch - it kills mobs just fine, but never heals up. Ive tried adding my own costum rules in the behavior engine, but it just wont use rejuv or healing touch (I have the moonbeast glyph, yes, so its not boomkin form blocking it or anything like that).

Im kinda clueless, and I've meddled around with a lot today. Any suggestions welcome!

gimme a sec, i'm gonna look at it

at rejuv and healing touch, at target choose unchanged...
also tick "log debug" before you start the bot and see if it sees all the spells
spells should be on bar 1-6 keys 1-0 ...not 11 and 12
and @droods...dont put spells on bar 1...any spells


Edit:
I made my own boomkin behavior. It correctly casts spells according to lunar/solar eclipse.
Pull is roots+wrath+moonfire
rotation:

[9:55:05 PM] Started combat engine[9:55:05 PM] Pulling: Training Dummy 17379524724484215796
[9:55:05 PM] SendKey: Entangling Roots Bar: 6 Key: 4
[9:55:07 PM] SendKey: Wrath Bar: 2 Key: 1
[9:55:10 PM] SendKey: Moonfire Bar: 2 Key: 2
[9:55:11 PM] Pull result: Success
[9:55:11 PM] SendKey: Starsurge Bar: 2 Key: 5
[9:55:13 PM] SendKey: Sunfire Bar: 2 Key: 3
[9:55:15 PM] SendKey: Starsurge Bar: 2 Key: 5
[9:55:17 PM] SendKey: Starfall Bar: 2 Key: 6
[9:55:19 PM] SendKey: Wrath Bar: 2 Key: 1
[9:55:21 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:24 PM] SendKey: Moonfire Bar: 2 Key: 2
[9:55:26 PM] SendKey: Wrath Bar: 2 Key: 1
[9:55:28 PM] SendKey: Sunfire Bar: 2 Key: 3
[9:55:30 PM] SendKey: Starfall Bar: 2 Key: 6
[9:55:31 PM] SendKey: Starsurge Bar: 2 Key: 5
[9:55:33 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:36 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:38 PM] SendKey: Moonfire Bar: 2 Key: 2
[9:55:40 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:43 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:46 PM] SendKey: Starsurge Bar: 2 Key: 5
[9:55:47 PM] SendKey: Sunfire Bar: 2 Key: 3
[9:55:49 PM] SendKey: Starfire Bar: 2 Key: 4
[9:55:52 PM] SendKey: Starsurge Bar: 2 Key: 5
[9:55:54 PM] SendKey: Wrath Bar: 2 Key: 1
[9:55:56 PM] SendKey: Moonfire Bar: 2 Key: 2
[9:55:58 PM] SendKey: Wrath Bar: 2 Key: 1
[9:56:00 PM] SendKey: Starfire Bar: 2 Key: 4
[9:56:02 PM] SendKey: Sunfire Bar: 2 Key: 3
[9:56:04 PM] SendKey: Wrath Bar: 2 Key: 1
[9:56:06 PM] SendKey: Starfire Bar: 2 Key: 4

+Typhoon when mob is near
+nature grasp-roots- disengage when mob is near
+barkskin and innervate
+lvl 90 talent nature's vigil...needs testing cause i only got 85 boomkin

Talents: http://www.wowhead.com/talent#dh`|jMd

Download link: Balance Druid MOP - by jumperu

DO NOT PUT ANY SPELLS ON BAR 1 IN ANY FORM
for boomkin spells use any bar from 2 to 6 ...any key from 1 to 10 ...not 11 or 12

Need feedback.

Edit2:
I will also post tomorrow my tweaked Bm hunt behavior, with traps, disengage, detterence, feign dead, practically all hunter spells are used ...
My lvl 86 hunter is taking 5-6 mobs (lvl 86), with a little help from his spirit beast pet.
Stay tuned :P

[Henka44]

Level    Date and Time    Source    Event ID    Task CategoryError    2012-12-01 11:12:53    Application Error    1000    (100)    "Faulting application name: SetupLB.exe, version: 1.0.0.0, time stamp: 0x50b88330
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e21213c
Exception code: 0xe0434352
Fault offset: 0x000000000000cacd
Faulting process id: 0x16a4
Faulting application start time: 0x01cdcfac6c1cbe40
Faulting application path: C:\Users\***\Desktop\3_SetupLB\SetupLB.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: aa9b9ce0-3b9f-11e2-ae2d-001e8c6ab9cd"

and

Level    Date and Time    Source    Event ID    Task CategoryError    2012-12-01 11:12:03    .NET Runtime    1026    None    Application: SetupLB.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Management.ManagementException
Stack:
   at System.Management.ManagementException.ThrowWithExtendedInfo(System.Management.ManagementStatus)
   at System.Management.ManagementObject.Get()
   at SetupLB.Form1.GetSn()
   at SetupLB.Program.Main(System.String[])

Im running both wow and the bot as admin and my wow is 32bit
I disabled both AV and Firewall
I restarted my computer
I repaired my Visual Studio 2010 cause i read something about it on the web
I uninstalled .net 4.5 and reinstalled .net 4.0
I tried making a new windows account cause i read something about it on the web
I tried all 3 download links in this post, i also tried to download it straight from the russian website, the russian installer fails to run, it doesnt start it only shows a "stopped working" type of message, so does 2 of the links in here, while the third one installs but gives me the above errors.

[Aeolin]

bot cant shell items, why?

[jumperu]

bot cant shell items, why?

i'm guessing you meant he can't "sell". Do you have more details?...a log or something would be nice so we know what you meant.
Did the bot go to town, opened the vendor and he did not sell the grey stuff?
Do you have in general options ticked "to town on full bags" and "sell grey items"?

[Aeolin]

the pointer passes over items but does not sell any item

[jumperu]

the pointer passes over items but does not sell any item

2 possibilities

1...you have mouse hook on, so disable it, as my signature says ...
2...get an addon, like scrap, that will auto-sell your grey items, and any other items you add to the sell list, like potions, food or whatever else drops in the zone of your profile and you want to sell. when u install it, go to advance option and disable "safe mode" or else it will only sell 12 items at a time. i also recommend you install auto-repair addon.

good luck

[Slaadi]

Is it somehow possible to loot nearby mines/herbs while running the grinding engine and killing mobs?

[hojo1995]

Hello, i would like to request a elemental shaman behavior for grinding to level him, not really looking for any loot, just want to kill things for the experience. If any one could make one for me, send me a message to let me know. Thank you =D

[kolaolli]

Hey how do i add this behaviour thing to bot?
Sorry never used this bot b4.
Help me out ><

[Psy0p]

Hi this is my first post and first attempt to bot WoW.

I installed Lazybot correctly I think, followed the guide/manual as good as I understood. downloaded and installed .net 4.5.

I log into my toon, lvl 1 undead hunter. run the program as adminstrator, attach it and I get this

[23:54:31] Could not load a valid grinding profile
[23:54:31] LazyBot is free and open source software!
[23:54:31] http://www.assembla.com/spaces/lazybot/wiki
[23:54:31] Перевод на русский язык выполнил Rage Hunter
[23:54:31] Visit Lazy Evolution - for support.
[23:54:31] [Player] Local GUID: 18086456103608786333
[23:54:31] Attached
[23:54:36] Reset bar to first
[23:54:37] Please load a profile
[23:54:37] Engine returned false on load

How do I do what it wants me to do? Reset the bar to first? How do I load profile? Load a grinding profile?

[romb0t]

@Slaadi
Not possible and won't be included for now as it could lead to more stuck situations.

@Kolaolli
Try to read the first page of this thread where Jumperu gives all the explanations on how this bot works and how to create your own profile (flying & grinding) and behaviors.

@Psy0p
Those messages are information message so:
"[23:54:36] Reset bar to first" means that the bot change your action bar to the first one. Nothing to do from your side.
"[23:54:37] Please load a profile" means that in order to start the bot (you have clicked on Start), you have to tell him which profile you need to run. Re-read the first page of this thread where Jumperu gives all the explanations on how this bot works.

[Psy0p]

Thanks for the reply romb0t!

was wondering if it is still possible to use these old profiles and behaviors Jumperu is linking to in his first post in this thread?


OLD: Here is a collection of Behaviors ( Alternate Link ) that i managed to gather in time, it has all the classes.(half of them are from darkadder88 bot wich is linked above)
And some PROFILES ( Alternate link ) to get you started.

And is it possible that someone can link to a profile and behavior?? Dont care what class. I just want to understand this Lazybot and get it working. I tried MMOcrawler, was really fun to watch! I tried the questing profile for orc that only goes from lvl 1-6, I was suprised how intelligent the bot was, picking up quests and all that stuff. It does have a lot of flaws, but still awesome!

But yea, will try reading again what Jumperu wrote in his first post. just having bit hard time understanding what to do and looking for some help and shortcuts :-)

Sorry for being noob, my second day learning about bots

[nikosraptopoulos]

Hello guys , i would like to ask ragehunter or anyone else that can respond to my question the following.
I renamed the .exe in something else, for more safety (in theory) , program starts fine its works like a charm, i would like to know if it will automatically autoupdate when the time comes for a new version or something, maybe the new name creates errors etc.

Thanks in advance

[jumperu]

Thanks for the reply romb0t!

was wondering if it is still possible to use these old profiles and behaviors Jumperu is linking to in his first post in this thread?
OLD: Here is a collection of Behaviors ( Alternate Link ) that i managed to gather in time, it has all the classes.(half of them are from darkadder88 bot wich is linked above)
And some PROFILES ( Alternate link ) to get you started.
And is it possible that someone can link to a profile and behavior?? Dont care what class. I just want to understand this Lazybot and get it working. I tried MMOcrawler, was really fun to watch! I tried the questing profile for orc that only goes from lvl 1-6, I was suprised how intelligent the bot was, picking up quests and all that stuff. It does have a lot of flaws, but still awesome!
But yea, will try reading again what Jumperu wrote in his first post. just having bit hard time understanding what to do and looking for some help and shortcuts :-)
Sorry for being noob, my second day learning about bots

You can't use the old behaviors, as they have old spell id's, most of them change with mop so they most likely won't work correctly. You can use the behaviors that are at the top of the post, those are updated for mop, unfortunately i don't have/played a elem shammy so i can't make a behavior for it, but i will try to make time and do one.
As for the profiles, you can use all of them if they suit your needs.

Hello guys , i would like to ask ragehunter or anyone else that can respond to my question the following.
I renamed the .exe in something else, for more safety (in theory) , program starts fine its works like a charm, i would like to know if it will automatically autoupdate when the time comes for a new version or something, maybe the new name creates errors etc.

Thanks in advance

Yes it will auto-update, i'm pretty sure that renaming it won't make a difference. But also know that blizz won't scan your process list, as far as i know, so you should be safe if you leave the name as it is.

[kolaolli]

WHy my lazybot doesnt mine ores? I mean its just flying over them?