LAZYBOT support thread, Q&A, requests and updates

[Kalasapa]

Thanks a bunch!

[goshy9]

has someone a tutorial to set it up for questing? i ****ing dont know how to use it ffs -_-

[jumperu]

has someone a tutorial to set it up for questing? i ****ing dont know how to use it ffs -_-

There is a manual in the first post.
Lazybot does not support question.
It's a simple and good bot, so it only has flying gathering/grinding/fishing engines.

[gav]

what the ui window do at the LB?

[gav]

well, i told you it happened to me before, but not so often and that was the cause.
other causes that i can suggest are:
1. you don't have the latest .net version - i think is 4.5
2. have you tried a profile made by some1 else?...did it behave the same?
3. tick "log debug" and see what it says when it deviates from the path..post it here
4. disable all wow addons
5. make sure you have auto-loot on
6. in general settings- try to increase the latency...go up to 1000 if needed, and see how it behaves, maybe you got a slow connection so bot is losing touch with the game

can't think of something else to suggest...

i installed the last version of net frame work,all addon is disable,my autoloot is on,and i wrote my log debug in another post before....but the problem is avalabe yet....then the only thing is the profile!
its my profile(made by my self): <?xml version="1.0" ?>
- <LazyProfile>
<PathName>lvl 15-20 ashen vale.xml</PathName>
<Vendors />
- <SubProfile>
<Name>1</Name>
<MinLevel>1</MinLevel>
<MaxLevel>99</MaxLevel>
<MobMinLevel>1</MobMinLevel>
<MobMaxLevel>99</MobMaxLevel>
<SpotRoamDistance>40</SpotRoamDistance>
<Order>True</Order>
<Factions>2154 2151</Factions>
<Ignores />
<Spot>4798.246 376.8516 31.35102</Spot>
<Spot>4870.118 409.8929 22.19495</Spot>
<Spot>4924.651 371.6908 26.62688</Spot>
<Spot>4979.407 387.4228 25.59098</Spot>
<Spot>5020.532 420.8737 23.14898</Spot>
<Spot>5092.73 435.5054 30.69484</Spot>
<Spot>5056.968 380.2113 30.01492</Spot>
<Spot>4985.282 311.4867 34.72628</Spot>
<Spot>4934.079 302.2939 36.44058</Spot>
<Spot>4895.361 333.536 27.44165</Spot>
</SubProfile>
</LazyProfile>

[Henka44]

i installed the last version of net frame work,all addon is disable,my autoloot is on,and i wrote my log debug in another post before....but the problem is avalabe yet....then the only thing is the profile!
its my profile(made by my self): <?xml version="1.0" ?>
- <LazyProfile>
<PathName>lvl 15-20 ashen vale.xml</PathName>
<Vendors />
- <SubProfile>
<Name>1</Name>
<MinLevel>1</MinLevel>
<MaxLevel>99</MaxLevel>
<MobMinLevel>1</MobMinLevel>
<MobMaxLevel>99</MobMaxLevel>
<SpotRoamDistance>40</SpotRoamDistance>
<Order>True</Order>
<Factions>2154 2151</Factions>
<Ignores />
<Spot>4798.246 376.8516 31.35102</Spot>
<Spot>4870.118 409.8929 22.19495</Spot>
<Spot>4924.651 371.6908 26.62688</Spot>
<Spot>4979.407 387.4228 25.59098</Spot>
<Spot>5020.532 420.8737 23.14898</Spot>
<Spot>5092.73 435.5054 30.69484</Spot>
<Spot>5056.968 380.2113 30.01492</Spot>
<Spot>4985.282 311.4867 34.72628</Spot>
<Spot>4934.079 302.2939 36.44058</Spot>
<Spot>4895.361 333.536 27.44165</Spot>
</SubProfile>
</LazyProfile>

You could always try to uninstall all .net versions you have, and then reinstall .net 4.0 and .net 4.5.
If you start by installing 4.5 before 4.0 windows will not let you because you already have the latest one, dunno if this will work but its atleast worth a try.

[wolfeater2010]

any good ele shaman behaviours?

Cant make one, and cant load any

Also when I try to load a profile, nothing happens on the map? Shouldnt it change? the LB map

[Henka44]

any good ele shaman behaviours?

Cant make one, and cant load any

Also when I try to load a profile, nothing happens on the map? Shouldnt it change? the LB map

As far as i know the only thing you will see when loading a profile is the waypoints etc. No background map, its black background with dots/lines.

[Romulis2000]

anyone else having issues with the balance druid behaviors on the first page ?
mine keeps trying to cast soalr beam but in bot calling that button starsurge
same with other spells. Theres no information for this behavior saying that spells have to be set to certain keys or nothing so im not sure why the bot keeps trying to cast a different spell after already isentifying that button as another spell

[jumperu]

anyone else having issues with the balance druid behaviors on the first page ?
mine keeps trying to cast soalr beam but in bot calling that button starsurge
same with other spells. Theres no information for this behavior saying that spells have to be set to certain keys or nothing so im not sure why the bot keeps trying to cast a different spell after already isentifying that button as another spell

Have you done what i pm'ed you and remove from bar 1 all the spells, and put them again on bar 2/3/4....?

[wolfeater2010]

Made a new profile for 88-90.
It has Ghost path, i did not add a vendor path cause the road to Klaxxi base is pretty messy and i use tundra mammoth to repair and vendor, it could stay there for 3-5 days non-stop before bags were full.
I suggest you do some quests before starting botting in this zone, like 10-12 quests should get you to honored rep with Klaxxi, then you can farm with this profile.. Dread Amber Shards - Item - World of Warcraft to turn in for Seeds of Fear - Quest - World of Warcraft "Upon completion of this quest you will gain: 23,600 experience + 250 reputation with The Klaxxi" @lvl 89 it seems..
I did not count the drops but it seems like 10 http://www.wowhead.com/item=89112 @1-2hours.. and the same ammount of Dread Amber Shards
I tried the potion of luck also, 2-3 chests from 1 potion (so not worth it in my opinion), but if you do it those are bop with confirmation...so be sure to install ark-autoloot addon or you will lose those chests..
It's not a very crouded area, i set the bot with logout on follow 1min, and it did not dc me for 1 day an a half , but i set it like that (usually i use 0) cause the distance between mobs is short, so another player can't tell the bot movements
Also, in the middle of the path there is a big tree, where you can park another char (vial, rocket...any 2seat mount)... i only tested with lvl 90 bot char and lvl 85 normal char with rested...it was half a lvl for around 10 hours ... better than sitting around in sw, but make sure you set loot-free for all
Npc's to kill:
Mire Beast - NPC - World of Warcraft
Swamp Strider - NPC - World of Warcraft
Sapfly - NPC - World of Warcraft
Amberscale Basilisk - NPC - World of Warcraft
Zone is Forgotten mire.

ZONE PHOTO imgur: the simple image sharer

Download link: Forgotten mire - dreadwaste.zip

Enjoy.

Ive got it targetting the mob...but it doesnt do any spells and stays on the wrong skillbar (stays on bar 2) all skills are on bar 1

[wolfeater2010]

I have basically got my own behaviour class going for ele shaman

The only problem im having him cast his healing surge.... I put it as Health/Power - condition is 'less than' - 50%, but even below 50% he doesnt do this...even under the Rest tab outside of combat, he doesnt heal himself below 80%.... Is there a better condition to put this under

[Iusethis]

I can't get the newest and updated version to run. When I start up the program I see the lazy bot logo then it just stops and disappears. I have tried running as administrator and I have .net 4.5.

[Iusethis]

nvm I scrolled back a few pages and found another link.. will try to use that one and see if it works

[EUROBOT]

I have basically got my own behaviour class going for ele shaman

The only problem im having him cast his healing surge.... I put it as Health/Power - condition is 'less than' - 50%, but even below 50% he doesnt do this...even under the Rest tab outside of combat, he doesnt heal himself below 80%.... Is there a better condition to put this under

@wolfeater: Send me your behaviour by PM or attach it here and I'll take a look and return it to you working. If you're using some specific talent build you want to be used, include it on the message.

Originally Posted by Romulis2000

anyone else having issues with the balance druid behaviors on the first page ?
mine keeps trying to cast soalr beam but in bot calling that button starsurge
same with other spells. Theres no information for this behavior saying that spells have to be set to certain keys or nothing so im not sure why the bot keeps trying to cast a different spell after already isentifying that button as another spell

Originally Posted by Jumperu

Have you done what i pm'ed you and remove from bar 1 all the spells, and put them again on bar 2/3/4....?

@all using druid behaviors: Really the problems starts when you've different spells on each form bar. If you clean the bars you aren't using, as bear and tiger form, i.e. for balance druid behaviors, then it'll detect correctly the spells you've binded on bar 1. There isn't also any problem if you've the same spell on the same bar 1 key for each form action bar. So, because boomkin behaviors aren't using other forms, clean up the other action bar from each form, and you could use action bar 1.

@Jumperu: I don't +rep you more because ownedcore site doesn't let me do it. It's incredible how you're sharing and sharing without receiving no +rep and no "thank you" messages. I've started sharing some here with the brewmaster monk profile, but as I've seen that people isn't like they were on previous Arutha's forum, I'm so much disappointed. I've more than 150 downloads, no feedback, only one +rep. Because of this, I want to say you: THANKS FOR YOUR EFFORT.