[BETA]Release: Farmcrawler Gatherbot v1.0

[lacey639]

Hi, im having a problem every 10 mins or so during a path i get an error saying im to far away, so i must go back to the start of the path , which makes it impossible to bot

[Emperor99]

So after some tinkering I got the bot working very well. It flies around. It mines. It fights. It's great.

Except that at a certain point in my route it just starts flying straight up indefinitely. Any ideas on what's causing this? Is it just out of waypoints?

[Alcapwned]

Please link your configurations, please. And which mount are you using?
And Emperor, I sugest you take a look at the first and last coordinate in your route to see if it matchs.

[Emperor99]

So I went back and created a completely new path. I made sure the last coordinate was the same as the first. Now, it won't even fly the route correctly before messing up. It just takes off in a straight line forever.

I've got the distance on the waypoints set to 35. I'm starting my path unmounted, on the ground. Completely stumped as to what's wrong.

[Alcapwned]

Okay, first of all, make sure Click To Move(CTM) is enabled. After loggin on your char, right click in the game a couple times. After starting FCGB, make sure the bot has detected which char your on and how much HP you got. If it hasn't, you have to restart WoW and the bot.
Furthermore, start your path mounted, in the air. I don't know if it helps, but I use waypoint distanse 25. And please link me your configuration + tell me which mount you use.

[Emperor99]

Okay, first of all, make sure Click To Move(CTM) is enabled. After loggin on your char, right click in the game a couple times. After starting FCGB, make sure the bot has detected which char your on and how much HP you got. If it hasn't, you have to restart WoW and the bot.
Furthermore, start your path mounted, in the air. I don't know if it helps, but I use waypoint distanse 25. And please link me your configuration + tell me which mount you use.

I've got Interact with target set as H. I've got click-to-move enabled. I've got my correct mount ID (Death Knight griffon) and my mount set to 2 on my action bar.

Here's my config:

[Config]
username=
password=
chatlogger=0
reloggen=0
Accn=
Accp=
Mine1=Saronite Deposit
Mine2=Rich Saronite Deposit
Mine3=Titanium Deposit
Herb1=
Herb2=
Herb3=
fightspell1=Plague Strike
cooldown1=6000
fightspell2=Icy Touch
cooldown2=5500
healspell=Death Strike
cooldownheal=6000
Usemount=1
Mountid=54729
distanz=100

[Alcapwned]

Okay, config seems okay, except that its called "Titanium Vein", not deposit. Remember to check if the bot has registred your char.

[Emperor99]

Yeah, I've done everything and it still completely ****s up. Thanks for the help, though!

[Alcapwned]

How does it mess up? Flys straight line?

[telcy007]

You must enable "Click to Move" in your interface.
And start the program with administrator privilegs.

[Emperor99]

You must enable "Click to Move" in your interface.
And start the program with administrator privilegs.

I've done both.

I've tried starting a path unmounted on the ground AND starting a path in the air mounted. Both times it takes off in a straight line ad infinitum. And I use admin privileges every time.

[bartaelli]

I've done both.

I've tried starting a path unmounted on the ground AND starting a path in the air mounted. Both times it takes off in a straight line ad infinitum. And I use admin privileges every time.

username=
password=

must be

username=Test
password=test

i think Oô

[p0rpz]

1)everything is working fine, except making the waypoints, been trying to figure this out for a while, can anyone with experience guide me through this? maybe even be courteous to supply a waypoint log for icecrown, sp, wg, or scholazar? thanks in advance any help is greatly appreciated. 2) when in mid-air it jerks quite a bit back and for, im not sure how to resolve this issue. 3)Also is there a way to decrease the time from which one lands -> mines -> mounts up and takes off? Looking to make it seem less obvious

edit: wonderful bot... great potential keep up the good work!

[donkeydick]

I am hving some serious problems with this program. I will open the program and try to run it and it will immediately disappear. If it doesn't disappear and actually lets me choose my path, it has an error and shuts down. If it lets me choose my path and starts flying around like it is going to work.

"The application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.

There seems to be a lot of bugs in this program. Are there any updates that someone should make sure they have in order for this to work> ie. net framework

UPDATE: I got it to fly to nodes and everything without errors, this thing is very touchy about how you do every little thing. Anyhow it's working but only for maybe 20 sec. It starts flying on the path I made but when it gets to a node or usually even before that it as a Windows error and shuts down.

[Fanstatic]

Hi there, this is my first post on the forums and I'd like to congratulate you on providing such a wonderful program. I'd also like to thank Alcapwned for the additional help.

At first I was having trouble setting this bot up with a flying mount as it wouldn't stick to the path that I had created so I've ditched that and replaced it for a ground mount version in low level areas. The only problem I'm having now is that sometimes the bot uses Escape to cancel and then mount up but on a few occasions it has actually used Escape whilst mounting up thus interupting the spell and now my little guy is running around on foot. Also another thing that causes this to happen is mounting up on slopes or hills, I found my character would jump on the spot and cancel the mounting up spell.

Now whilst I'm using this program to gather low level ores I'd really like to use it on my druid to gather high end herbs, the only problem being that it doesn't quite work with the Swift Flight Form as it doesn't get low enough on the ground for me to gather the herb as with other ground mounts when you dismount you land on the floor. Would there be any way you could encorporate this into the program as ideally I'd like to use druid form as it cuts out the whole 'dismount-gather-mount up' routine.