[Open Source] Lucky's Spacebot

[vapor311]

Please post a copy of your System info (About-tab) to provide some more detailed information together with your question.

Same here for me. Trying to use drexel and hydian to get past that 41-44 hump and they both start and exit mission in the first 5 seconds.

Here is my about tab.

Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64)
RAM total:6 GB,free:3 GB, used:43 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0

[gnostdural]

First of all, thanks a lot for your time developing this thing. The UI is very simple and it's making people's lives a lot easier. Great work!

I'm having some issues on Republic (15) Javaal Fleet Action running version 5.34. The main objective is fulfilled just fine, but the 5 mini ships objective always messes up. On the first pass of two ships for the objective, the bot only manages to kill one. This would normally be fine, but on the last two ships the bot blows it's entire payload of missiles on dead space right before the targets are even visible, leaving the chamber empty of missiles and the objective incomplete. This happens consistently.

The second issue I have is with resize and move. Once it opens up the galaxy map, it misses the clicks on the space mission locations. It seems to be just under where it needs to click by a few pixels. I was able to remedy this by moving my window down to match where it's clicking, but I worry this might adversely affect other features. It might be worth noting that my character rarely jumps at the beginning of the cycle.

Any fixes to this would be appreciated. Is it a configuration issue? Can I record my own process for the bot to run though? Is it a bug to be fixed in a later version?

Thanks so much!

Please try 5.35 preview. This is the latest version and there is no chance to support anything else than it.

Confirmed that I still have the same issues on 5.35. Even after using resize and move, the galaxy map clicks are always a few pixels lower than where they need to be. I also have a new problem with the Republic (15) Javaal Fleet Action: the bot just leaves the mission every time at the beginning of the mission.

[phagotron]

Hi Guys,

Having an issue with Aeten Defense, mission starts and bot is showing the error "Pictures\Space_Aeten1.png does not exist or is unreadable" I have checked the folder and it is there and seems to be readable.

----Sys Info---

Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:2 GB, used:66 %
Desktop dimensions: 1680x1050(32bpp, 60Hz)

SWTOR Client is running with 1024x766

On Target Time=49
Missile Delay=333
Timer Skew =+1000
IMG Tolerance=1500
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=1
Last mission=Aetan Defense

---Sys Info---

Hmm, that indeed is a quite strange issue since 5.35 uses space_aeten00.png for the timer sync. Aeten1 has been used with 3.34 ... would suggest to remove all old bot versions (or tansfer them to a zip), unpack 5.35 fresh from archive, restart the pc and then try again. Btw - if the bot works correct on your box, Img tolerance should be 100 and timer skew should be +50. If the image detection fails, it is possible to tweak it, but this is more last resort than first choice.

[phagotron]

Same here for me. Trying to use drexel and hydian to get past that 41-44 hump and they both start and exit mission in the first 5 seconds.

It looks as if you dont use the Aero desktop*). All diag values are nominal, but maybe try a calibration anyway. If it says nominal then the image search should work.

*) some Aero styles can be customised. If the window frame thickness or the title bar have been changed, the coordinates will differ from what the bot expects.
Best might be to switch to Windows 7 Aero theme ("Factory standard") here.

[phagotron]

Confirmed that I still have the same issues on 5.35. Even after using resize and move, the galaxy map clicks are always a few pixels lower than where they need to be. I also have a new problem with the Republic (15) Javaal Fleet Action: the bot just leaves the mission every time at the beginning of the mission.

What did calibrate say? It sounds as if you arent using a standard Aero desktop too. If you customized it, there is a chance to get it to work using the calibration.

[Jevnaker]

thanks to phagotron's help i manged to fix one issue that has plagued me since i got the botish, but it sadly created a new issue now the mouse goes right below the accept icon.

[HoY11]

drag the windowed game down from the top of the screen by about as far as you see the mouse missing the button.. thats how I've always run Lucky's since I prefer Classic theme

[vapor311]

It looks as if you dont use the Aero desktop*). All diag values are nominal, but maybe try a calibration anyway. If it says nominal then the image search should work.

*) some Aero styles can be customised. If the window frame thickness or the title bar have been changed, the coordinates will differ from what the bot expects.
Best might be to switch to Windows 7 Aero theme ("Factory standard") here.

Heres the odd part, I am in aero theme, default windows actually as I just did a fresh install of win 7 ultimate.The co'ords are fine in missions that do work in 5.31 for example. Since 5.32 and newer several missions do this to where they start mission and instantly leave mission. I tried a calibration as well.

[Buuford]

Great work you guys.

I thought I was having the same problems with 5.35 that I was having with 5.34 with the crew skills not working correctly and a couple other things.

So, what I want to contribute is basically that I went back to the basics and maybe this will help some people and maybe not others.
First thing I checked was to make sure that when I unzipped 5.35 that File AND Folder structure were still the same. I know early on I was having the issue where the missions would start but then fail. That's when I realized that I had just copy/pasted everything in my zipper program instead of unpacking it to keep the structure. Basically if you have all the files in one folder and don't have any sub folders in the lucky folder then you need to change that.

Second, since I had been running lucky's 5.34 and then tried running 5.35 and still experienced some of the same issues I thought maybe something was still hung in memory. So I restarted the computer to clear the memory and presto 5.35 runs great. Issues with the crew skills are gone and most missions I've tried work as well.

I wanted to add, that the only time I was ever moved back to the character select screen was after I had run a previous version and then tried to run a newer version of lucky's without restarting the computer. After I did the restart I haven't been pushed back to the character select screen.

Thanks again for all the hard work you guys have done!

Buuford

[vapor311]

Great work you guys.

I thought I was having the same problems with 5.35 that I was having with 5.34 with the crew skills not working correctly and a couple other things.

So, what I want to contribute is basically that I went back to the basics and maybe this will help some people and maybe not others.
First thing I checked was to make sure that when I unzipped 5.35 that File AND Folder structure were still the same. I know early on I was having the issue where the missions would start but then fail. That's when I realized that I had just copy/pasted everything in my zipper program instead of unpacking it to keep the structure. Basically if you have all the files in one folder and don't have any sub folders in the lucky folder then you need to change that.

Second, since I had been running lucky's 5.34 and then tried running 5.35 and still experienced some of the same issues I thought maybe something was still hung in memory. So I restarted the computer to clear the memory and presto 5.35 runs great. Issues with the crew skills are gone and most missions I've tried work as well.

I wanted to add, that the only time I was ever moved back to the character select screen was after I had run a previous version and then tried to run a newer version of lucky's without restarting the computer. After I did the restart I haven't been pushed back to the character select screen.

Thanks again for all the hard work you guys have done!

Buuford

none of the above worked

[AzmariaDei]

Hello! Just downloaded 5.35 and i must say thanks for all the hard work! I have an issue in it though - when it completes a mission once, it says "mission advance selection pending" and just sits there until I hit F2 and click on the mission again... It's doing this for all of the missions on me. I've done the usual reboot/restart routine already. I haven't seen this happen in any prior version, either. Has anyone else had a similar issue? Thanks! ^_^

Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:4 GB, used:45 %
Desktop dimensions: 1920x1200(32bpp, 59Hz)

SWTOR Client is running with 1024x766

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=0
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=

[vaelis]

Hmm, that indeed is a quite strange issue since 5.35 uses space_aeten00.png for the timer sync. Aeten1 has been used with 3.34 ... would suggest to remove all old bot versions (or tansfer them to a zip), unpack 5.35 fresh from archive, restart the pc and then try again. Btw - if the bot works correct on your box, Img tolerance should be 100 and timer skew should be +50. If the image detection fails, it is possible to tweak it, but this is more last resort than first choice.

Figured the issue out. It turns out that while the bot is looking for Pictures\space_aeten00.png, the actual file was called space_aetan00.png in the 5.35 Pictures file. When i changed the file name it works perfectly.

[phagotron]

drag the windowed game down from the top of the screen by about as far as you see the mouse missing the button.. thats how I've always run Lucky's since I prefer Classic theme

Currently the bot wont run with classic since image search bummers here due to different GPU settings. But - it would be nice to get it running with classic, because the pixel search works very much better here. Anyway, until there is working alternative for imagesearch dll Aero will have to do it.

[phagotron]

Figured the issue out. It turns out that while the bot is looking for Pictures\space_aeten00.png, the actual file was called space_aetan00.png in the 5.35 Pictures file. When i changed the file name it works perfectly.

Great, thanks for the hint. The picture file indeed needed a rename.

[phagotron]

Hello! Just downloaded 5.35 and i must say thanks for all the hard work! I have an issue in it though - when it completes a mission once, it says "mission advance selection pending" and just sits there until I hit F2 and click on the mission again... It's doing this for all of the missions on me. I've done the usual reboot/restart routine already. I haven't seen this happen in any prior version, either. Has anyone else had a similar issue? Thanks! ^_^

Desktop dimensions: 1920x1200(32bpp, 59Hz)

Maybe try setting your desktop to 1680x1050, please see Cystacae's FAQ (first post this thread) A2.3 too. If calibrate says nominal, the mission restart should work but as it looks we have another HD destop issue here.