[Open Source] Lucky's Spacebot

[vaelis]

Hmm, that indeed is a quite strange issue since 5.35 uses space_aeten00.png for the timer sync. Aeten1 has been used with 3.34 ... would suggest to remove all old bot versions (or tansfer them to a zip), unpack 5.35 fresh from archive, restart the pc and then try again. Btw - if the bot works correct on your box, Img tolerance should be 100 and timer skew should be +50. If the image detection fails, it is possible to tweak it, but this is more last resort than first choice.

oops double post

[pikachu83]

Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:5 GB,free:2 GB, used:54 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Aetan Defense


at fist i was getting the leave comabt soon as it went in and logged me out, read the image needed to be renamed so i did, not it does the same but few seconds later, it find that image fine, my desktop is aero and everything none of these pixel searching versions has eva worked for me

[vaelis]

Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:5 GB,free:2 GB, used:54 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Aetan Defense


at fist i was getting the leave comabt soon as it went in and logged me out, read the image needed to be renamed so i did, not it does the same but few seconds later, it find that image fine, my desktop is aero and everything none of these pixel searching versions has eva worked for me

When you run the mission, keep an eye on the bot. Down the bottom of the main screen it will tell you what stage the bot is at and what the error is. (note: you may have to enable the debug option... I turned it on and don't bother turning it off.)

[phagotron]

Hi all,

because of the problems posted I added a few corrections and updated sysinfo. Please delete the old preview and get the new one:


(Please load the current version from page 14 of this thread)

Updates:
- Sysinfo now tells not only the dish dimensions but also the Window dimensions
- Calibrate will estimate the needed dimensions, offset and img tolerance and set the window according to it

Note: to save any values permanently, exit the bot with the cross. (x) or the windows close function. F4 will exit without save.

Please make sure that you are using Aero and not a high contrast desktop which is just looking like Aero.
If you are using any custom skin or customized your titlebar, borders, fonts or whatever calibrate might
be able to correct that. If calibrate fails you are not using Aero. If you are not using Aero the bot will not work.

[xwabba]

used the latest stable and did nothing.. but used the latest unstable and works fine.. til for some reason sw closes out at some point.. seems to be at random times.

edit: also seems to add 4-5 to the win count each win and sometimes adds a loss when winning. haven't seen it lose yet to see if it adds multiple to loss. that should be an easy fix.

edit: just tried the 5.35x.. unlike the other versions I tried.. it actually started the crew skills correctly.. but after starting the Sarapin Assault it decided for whatever reason to logout. o.o tried Nez Peron Sweep also, starts mission then exits saying mission advance or something like that.. right after the finding init timer




Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64)
RAM total:5 GB,free:2 GB, used:61 %
Desktop dimensions: 1600x900(32bpp, 60Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Sarapin Assault
Win / Loss 0 / 1

[darthangrydad]

Same problem here, bot starts missions fine, but then opens the exit menu and exits out of the mission every time. If i don't stop it, it will continue in this loop. I have tried all suggestions listed here, deleted the old version unzip the new version and restarted my PC, ran calibration and it says my screen dimensions are nominal.



Lucky's Spacebot v5.35psx (preview)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:4 GB, used:45 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0

[vapor311]

Ok, Me and phagotron spent some time on my machine with 5.35 today the Hydian way mission. Couple of things to note. One is make sure your user interface is set to default. Another is try to adjust the image tolerance down to 90 and work upwards until it seems to work properly. 1x1 until its right. However a new quark I have to report is that everytime it fails a mission its logging me out. So phagotron you might want to take a look at this or if need be do another remote session. The odder part is after it fails and im logged out of my toon, it actually logs me back in and tries again.

[Jevnaker]

i had a similar thing with the newest version, the first time the bot after me modding the mission start icon on map cords it starts mission fine waits a while does nothing then make leave space mission thing apear then presses it. first time it happended i got loading screenw hen loading screen was done i was sudddenly at char screen it then logged me back in.

[darthangrydad]

Update:

Just thought I'd add this note. I tried v5.34 and it doesn't quit the mission like 5.35 does, missions seem to run but only one at a time.

[Zach6770]

Well with 5.35 I'm still having trouble with the bounty hunter ship... It won't complete jabiim and I REALLY love this toon... It does decent till the end and the escort just gets beat on.... Please helpT

[phagotron]

Same problem here, bot starts missions fine, but then opens the exit menu and exits out of the mission every time. If i don't stop it, it will continue in this loop. I have tried all suggestions listed here, deleted the old version unzip the new version and restarted my PC, ran calibration and it says my screen dimensions are nominal.

Your debug output says screen dimensions and settings in general are ok. Check if your swtor interface really is set to default, then try increasing img tolerance until the mission timer init works.

[phagotron]

used the latest stable and did nothing.. but used the latest unstable and works fine.. til for some reason sw closes out at some point.. seems to be at random times.

edit: also seems to add 4-5 to the win count each win and sometimes adds a loss when winning. haven't seen it lose yet to see if it adds multiple to loss. that should be an easy fix.

edit: just tried the 5.35x.. unlike the other versions I tried.. it actually started the crew skills correctly.. but after starting the Sarapin Assault it decided for whatever reason to logout. o.o tried Nez Peron Sweep also, starts mission then exits saying mission advance or something like that.. right after the finding init timer

Same here, check interface settings and then increase img tolerance. The dropback to char selection is owed to the new evader mechnism. The mission advance process already adresses that, strangely enough this works well on 1680x1050 but seems to fail with other screen dimensions. I'll adress that in one of the next hotfixes.

[phagotron]

Ok, Me and phagotron spent some time on my machine with 5.35 today the Hydian way mission. Couple of things to note. One is make sure your user interface is set to default. Another is try to adjust the image tolerance down to 90 and work upwards until it seems to work properly. 1x1 until its right. However a new quark I have to report is that everytime it fails a mission its logging me out. So phagotron you might want to take a look at this or if need be do another remote session. The odder part is after it fails and im logged out of my toon, it actually logs me back in and tries again.

You mean char selection I guess. The behavior you describe is just as it currently should work, it should even be able to recover from server selection. I'll address that in next hotfix, since it tends to fail in some HD environments. Thanx for the session, was really a good way to work out the issues, Since its the evader here and its working as expected for you this time it wont help that much, but I'd be glad to use that for another issue. Btw Hydian with emp, is much more fun

[phagotron]

Well with 5.35 I'm still having trouble with the bounty hunter ship... It won't complete jabiim and I REALLY love this toon... It does decent till the end and the escort just gets beat on.... Please helpT

Sorry, currently I do not have a BH ready for testing, so not much hope to address that with 5.35.

[vapor311]

You mean char selection I guess. The behavior you describe is just as it currently should work, it should even be able to recover from server selection. I'll address that in next hotfix, since it tends to fail in some HD environments. Thanx for the session, was really a good way to work out the issues, Since its the evader here and its working as expected for you this time it wont help that much, but I'd be glad to use that for another issue. Btw Hydian with emp, is much more fun

Correct on the char selection screen. While I failed this mission over and over due to it missing one of the engines, it is still the fastest way to get from 41-44. Its working well after the tweaks we made.