[WingmanReloaded] Auto (Flask, Quit, Mine, Spell) & Loot (Manage, Filter, Click)

[eliteshades]

Not sure, there is no compile error for the library. and the referenced line is totally normal.
May want to download the latest version from GitHub Master Branch directly, see if that fixes your issue.

Pressing save config breaks the script, making none of the keybinds to work. I had to fresh unzip contents to get it working again. It says something like "detects ur on a character, new health, mana samples" then nothing, gamestate shows all red. Doing a fresh "run wizard" doesnt fix it, had to reinstall.


Also when I dont mess the script up by pressing save config, I still cant seem to get the auto flask to work, everything else seems to be working accordingly

https://www.screencast.com/t/OYkyUvnLQw - My settings (edit: changed cdr to 6000)

I have auto flask enabled, and set threshold under 90% as a test and ran the calibration test. It doesn't automatically use life-flask in slot 1. Auto mines/caplocks to use all flask seem to work fine. Auto flask not so much

[Milkshakes00]

I unfortunately can't get the grab icon to work for strings(2560x1440); For instance, I'm trying to capture the skill-up icon, but the icon fades in/out. So I capture it with the Grab Icon option, trim the sides a bit so that it's mostly just the +, and it always fails the check.

Heck, I tried to capture the word 'level', use Gray2Two and Color2Two, and neither come up with results that work. Always fail on the check.

Also having an odd issue occasionally while loading the script; Sometimes it doesn't 'go', and clicking on the icon in the taskbar simply brings up a window that looks like it's parsing something, but gets stuck on line '8162: Lib: = [ ]' until it gets closed and reopened a couple times.

Edit: I've also noticed it oddly scrolls in close to the character when stashing, which is a bit odd, but it works fine otherwise.

[FrEeMaNlav]

Pressing save config breaks the script, making none of the keybinds to work. I had to fresh unzip contents to get it working again. It says something like "detects ur on a character, new health, mana samples" then nothing, gamestate shows all red. Doing a fresh "run wizard" doesnt fix it, had to reinstall.


Also when I dont mess the script up by pressing save config, I still cant seem to get the auto flask to work, everything else seems to be working accordingly

https://www.screencast.com/t/OYkyUvnLQw - My settings (edit: changed cdr to 6000)

I have auto flask enabled, and set threshold under 90% as a test and ran the calibration test. It doesn't automatically use life-flask in slot 1. Auto mines/caplocks to use all flask seem to work fine. Auto flask not so much

yea,pressing safe conf breaks the script,don't know how to use it.

[gfnparty]

new error Screenshot by Lightshot
downloaded from GitHub - BanditTech/WingmanReloaded: Bring a Wingman exile, you're going to need it!
win7 x64
AHK version: 1.1.32.00 32bit
POE stands alone x64 1920x1080

[V4mpyr]

Can't seem to get the auto flask to work. no errors, set the % for flask and doesn't pot. Am I missing something?

[eliteshades]

Can't seem to get the auto flask to work. no errors, set the % for flask and doesn't pot. Am I missing something?

You have to enable autoflask using default key: Alt-f11

But it still doesnt work, I got the auto mines/cap lock to use all flasks to work but autoflask isnt working. maybe im missing something...

[V4mpyr]

I'm experiencing the same thing.

[thebbandit]

Everytime there is a new patch, it seems like people who were unable to get PoE-Hud working come flooding into the thread with issues as they frantically set things up for patch day.

Let me just clear things up.

Yes the script is working fine, YOU are having issues, not the script. Getting tired of people saying the script isnt working, when they should be stating "I am having issues with the script". Of course its the script thats at fault, not them. XD But somehow I am here on my PC using the script perfectly fine.

No not all resolutions are supported, If you dont know what aspect ratio your monitor is, then look it up. FFS I am not google search. Look at the first post for which aspect ratios are supported, the only aspect ratio that I can guarantee is working perfectly would be 1920x1080. Anything else is "Unofficially supported" since I do not have a way to continue to test anything on those ratios.

Memory issues can happen if your client.txt file is too large. Try clearing your file and leave the last line and restart the script. That should fix it

[thebbandit]

I unfortunately can't get the grab icon to work for strings(2560x1440); For instance, I'm trying to capture the skill-up icon, but the icon fades in/out. So I capture it with the Grab Icon option, trim the sides a bit so that it's mostly just the +, and it always fails the check.

Heck, I tried to capture the word 'level', use Gray2Two and Color2Two, and neither come up with results that work. Always fail on the check.

When I capture the skill-up icon I found the best way was capturing the middle shade of the variation. So let it go back and forth, then using the screenshot hotkey you sample right when its at the middle shade. Then I put the color to the brightest shade in the center, where the cross meets. So I am not sampleing the black, its the orangey yellow highlighted part. Then I cut it down all the way to where it looks like four squares of matching, and a cross in the middle of the non matching pixels.

To get an idea of what your looking for, you can paste the string into the get icon GUI and then click on the line. You will see the ASCII representation of the string in the top edit window.

000___000
000___000
000___000
_________
_________
_________
000___000
000___000
000___000

the circles are the matching area, the underscore is the non matching.

Also having an odd issue occasionally while loading the script; Sometimes it doesn't 'go', and clicking on the icon in the taskbar simply brings up a window that looks like it's parsing something, but gets stuck on line '8162: Lib: = [ ]' until it gets closed and reopened a couple times.

This is an issue with client file being too large, there has been some constant issues with the client parser for some people with large files. That is something I am still looking into.

Edit: I've also noticed it oddly scrolls in close to the character when stashing, which is a bit odd, but it works fine otherwise.

This is a resolution issue, the coordinates for your stash window are not lining up, so when it scrolls the stash tab menu back to the start it is not actually on top of the menu. I put this in place because in standard there are possibly hundreds of remove only stash tabs, and if you were scrolled down on the tab list it would make it go to the wrong tab with the script.

If you would please submit a report on github so that we can go over whats happening with the scaling, because your resolution should be working at 16:9. Make sure you have it set to standard

does the auto-mine work normally? it's not working for me currently

How to disable the info panel in the bottom left?

here is where I gave info for that ([WingmanReloaded] Auto (Flask, Quit, Mine, Spell) & Loot (Manage, Filter, Click))

[eliteshades]

My desktop resolution is 1920x1080, my in game resolution is 1920x1080, windowed fullscreen and I'm still having issues with autoflask and save config making all the hotkeys to not work.

[gfnparty]

Memory issues can happen if your client.txt file is too large. Try clearing your file and leave the last line and restart the script. That should fix it

This work perfectly thx bro!
UPD
omfg, i have video driver updated, script recalibrated flasks doesn't work but F12 (manual logout) works fine. Give me a tip what's wrong...
UPD2
The "PoE-Wingman v1.2.1" works, mb it's some wrong in color calibration in ur script?

UPD3:
Have a solution. Local chat must be ON!

[V4mpyr]

I am currently have issues with the script.

My resolution is 1920x1080. P.O.E. is set to windowed Full screen. I am running HDMI to a Smart TV from my Laptop.

I can get caps lock keybind to pop all flasks. Bottom left corner says Auto Quit: Off and Auto Flask: On

My potions are set to 90% for testing purposes and under "Life" profile.

I have the latest AHK, framework and pretty much everything else is up to date.

Any advice would be appreciated.

Regards,
Vamp

[eliteshades]

I am currently have issues with the script.

My resolution is 1920x1080. P.O.E. is set to windowed Full screen. I am running HDMI to a Smart TV from my Laptop.

I can get caps lock keybind to pop all flasks. Bottom left corner says Auto Quit: Off and Auto Flask: On

My potions are set to 90% for testing purposes and under "Life" profile.

I have the latest AHK, framework and pretty much everything else is up to date.

Any advice would be appreciated.

Regards,
Vamp

Same here but I dont have my laptop connected anywhere else. I dont know what im doing wrong

[thebbandit]

Patch Notes

Got some great improvements for the Loot Vacuum since this new color introduced a lot of delay with the old method. This new way of searching for Background colors is much faster, and also searches the entire array of colors at once. Because this is so much faster, I am allowing to adjust the number of colors that you can use for the Loot Vacuum. It must have at least 1 set of colors, but you can add as many as you like.

Dont forget to update your Skill-up string, I finally nailed down the exact variation for it to not click the greyed out ones but always catch the highlighted ones.

Version .08.09 December/15/2019
--------------------------------------------------------------------------------
Adjusted Skillup string again by 2 shades more strict
    update to new default on strings tab
Re-arranging the string tab to make room for town vendors

Library stuff - Changes and additions
    CompareHex has been renamed CompareRGB, new function named CompareHex
        CompareHex will accept RGB or BGR hex input and compare within variance
    Function added to library to build Findtext strings from single pixel color
        Can accept arrays of colors or individually, and assign variance
        Use this to build 1 or 5 pixel squares to use for searching colors

Loot Vacuum adjustments and improvements
    Loot Vacuum now uses the FindText strings from Hex2FindText
        Searches all colors at once instead of individually
        This makes it much much faster, once again FindText library coming through!
    Now that we search faster, we can add more colors
        Add or remove sets of colors for your own custom filter colors
        As always ensure the background is not transparent or it will not match
        Will not let you remove the last set of colors
    Default color order has been flipped, rarer items prioritized
        Quest color is now also first

Reverted Client.txt first scan method, no longer flips file contents
    I think I have found all the issues, and client will parse as long as encoded
    Just simply stops after 1000 loops if it still has not found location
        Will write to log informing that you may need to encode your file with BOM
    This method had no issues with large files, no need to load into memory

Decided next major version I will finally swap all values using BGR to RGB
    This will allow for consistency between different parts of the script
    But will cause a need to recalibrate all samples which are using BGR

I am currently have issues with the script.

My resolution is 1920x1080. P.O.E. is set to windowed Full screen. I am running HDMI to a Smart TV from my Laptop.

I can get caps lock keybind to pop all flasks. Bottom left corner says Auto Quit: Off and Auto Flask: On

My potions are set to 90% for testing purposes and under "Life" profile.

I have the latest AHK, framework and pretty much everything else is up to date.

Any advice would be appreciated.

Regards,
Vamp

First step would be to calibrate your gamestates, run the wizard and ensure they are all working afterwards with the Show Gamestates button.

Then calibrate your health, mana and ES by saving your configuration while you are on your character

Next select Debug Messages and tick both C log and Flask MS, go out into the world (Everything is paused in town or hideout) and see if the Flask MS timers show up. If they do not, something is wrong or you have not turned on flasks.

Look at the C log output and ensure that you are showing zone changes being registered. If you do not show that you are changing zones, you may be having issues with the parser not recognizing your language. In that situation, you will want to ensure you Client.txt file is encoded with UTF-8-BOM, you can do that with notepad if you have not already. (Open the file, save as, Select encoding dropdown, choose UTF-8 with BOM)

If everything checks out you should be up and running. Go ahead and untick the C log and Flask MS checkboxes, then turn off debug messages.

[Kaoin]

Is there any way to make it work on 1440 * 900?