[Goldfarming] AFK Act 1 Sarkoth [AutoIT Script] [1920x1080] [WIZARD] *mackus101*

[nvmax]

Think this guy is lieing? http://www.ownedcore.com/forums/diab...nt-banned.html (Warning! Account banned)
I don't see how AutoIT can be detected. Isn't it just mouse+keyboard emulation?

first off he was selling gold, and probably botting 24/7 which is unrealistic for anyone period, and probably loading the same map over and over for hours on end, if you use it for a few then stop it and resume some time later I doubt they will find you.

But again using any 3rd party program to gain a unfair advantage is bannable, so again use at your own risk.

Though no they cant detect autoit running, but also dont name your script a obvious name like "botgold" or "BOT" or something on those lines, put it as " taxes2011" or ventrilo, skype ect...

[Ratoxd3]

here i teleport in 2 spots and one of that is not aiming the cave and i exit and no enter in , how i fix that?

[nvmax]

adjust your timings your system is too slow for the times, so change the sleeps after each teleport to probably like 100 and then the last one after it buffs keys 3 and 1 to a sleep of like 300 or so might work for you... your going to have to mess around with them a bit.

[blb078]

I'm having an issue getting the pixel code. I was using the program w/autoit but I've found out that it is actually giving me the pixel code of my desktop color and not what the mouse was over in the game, even though the game was the active window in full screen mode. So is there a reliable way to get pixel color code? or a setting in the autoit program to get the right pixel code in the game?

Also when determining the pixel color code on the loot what part of the mouse should the tip be over? somewhere in the name? the color on the ground? or somewhere else/? thx

anyone able to recommend something here?

[razius1212]

how can i make it work on 1600x900? who to find and change coordinates where he moves ?

[Ratoxd3]

adjust your timings your system is too slow for the times, so change the sleeps after each teleport to probably like 100 and then the last one after it buffs keys 3 and 1 to a sleep of like 300 or so might work for you... your going to have to mess around with them a bit.

i already do that , but it doesnt works , the mouse stops a little bit for the right of the cave

[GALLIEN]

i already do that , but it doesnt works , the mouse stops a little bit for the right of the cave

same with mine, mouse hovers to the right of cave entrance

[Fumador]

Does anyone know working for someony who have 16:10 ratio monitor and 1440x900 resolution? Most scritps works only in 1920x1080 resolution and this really sux for me :/ (and probably many more ppl).

[XinShen]

So far Travincall's script works for me the best. How do you make it so that it skips the looting process? I find that it slows down the run too much. Thanks.

Travincall123 - Pastebin.com

nevermind got it.

[Travincall]

So far Travincall's script works for me the best. How do you make it so that it skips the looting process? I find that it slows down the run too much. Thanks.

Travincall123 - Pastebin.com

nevermind got it.

I wouldn't skip the looting process even though it does add about 100k extra every hour. I have found some pretty darn good rares and 2 excellent legendary's leaving it on overnight.

[catalyzer]

hi Travincall,
i am newbie with D3 as well as in this forum.
Could you please guide me how to setup the script. what software to run it? how to run it?
i am using Wizard lvl 26 1920x1080p screen res
sorry i am totally noob.
thanks in advance

[acewhoace]

So I used the OP's script and added loot blues plus vendoring, and followed the post to run windowed in 16:9 (in the Bots and Programs Forum).

My native res is not 16:9 so I made mine windowed into a 1600x900. This is working properly without breaking. Sometimes if he gets blocked and doesn't warp to the right spot, he won't enter an open dank. This is to be expected. Also I've had a couple unsuccessful loots where the toon will leave some yellow/blues but whatever. I think I may have fixed the death on TP bug. Basically, if it doesn't detect dank, he uses "t" to teleport, but it assumes that the teleport was successful. If you get hit by a mob you die and it tries to rerun the script but you are still waiting to revive so it doesn't recognize the "You have died" pixels. So I upped the sleep time after he warps to base and before the script checks for "you have died" to 6000 (Line 161 on Pastebin). Seems to work for me. Give her a go. Yes it makes the run time longer if no dank is detected but at least it prevents the script from breaking.

Very Important - This needs to be changed in your d3prefs located in Documents/Diablo III

DisplayModeWindowMode "1"
DisplayModeWinLeft "1"
DisplayModeWinTop "1"
DisplayModeWinWidth "1616"
DisplayModeWinHeight "938"
DisplayModeUIOptWidth "1600"
DisplayModeUIOptHeight "900"
DisplayModeWidth "1600"
DisplayModeHeight "900"



This is the edited script. wizwormsark - Pastebin.com

Script uses OP's skill set.
23k dps - If have lower dps, you need to change Line 124 to a higher value

[Travincall]

hi Travincall,
i am newbie with D3 as well as in this forum.
Could you please guide me how to setup the script. what software to run it? how to run it?
i am using Wizard lvl 26 1920x1080p screen res
sorry i am totally noob.
thanks in advance

Hey bro I'm no code/script writer I'm just pretending to be one by modifying other peoples codes to my needs. I think you sent me an email and I replied but the main issue for you and anyone else reading who is a low lvl is that you don't have the skills these scripts are written for. You need to be atleast lvl 45 for most of these scripts but 60 is highly suggested. However for anyone having trouble figuring out how to get a script to work you just download AUTOIT from any website and after you download and install just right click on your desktop and select "create new autoit". Once you do that simply click edit on the new file you created and copy the script that ppl are posting links for. Then save and right click run to start. I just want to be honest though I'm not a script guy so I can only help with minor things like timing issues or whether or not you are picking up items properly. I cannot write a new code for anyone who is a lower lvl. If you do not have the dps that is a simple issue and if you just tell me what your dps is I can give you a round-about sleep adjustment in order for you to kill sarkoth.

[Travincall]

BAMMMMMMMMMM FOR ANYONE HAVING ISSUES WITH RUNNING THE SCRIPT FOR A LONG TIME AND COMING BACK TO THE EXIT GAME SCREEN ODEN2005 HAS FOUND A FIX. I copied it into the wizard code that I am using and posted a few pages back but if someone is using a different code its not hard to find since he labled the script section. ALL CREDITS GO TO ODEN2005 for the fix

travincall123 - Pastebin.com

[Danglah]

Here is my small collection of edits that has optimized my run -
-Fixed cellar spotting
-Uses diamond skin much quicker to avoid getting raped outside
-Buffs when it enters the cellar to save time and stop getting killed outside
-Incorporates ODEN2005's exit menu fixes

Optim Wiz - Pastebin.com
Wizard - Game Guide - Diablo III