Cant open my server, arcemu problems.

[fstenbergp]

When i open my logon and world exe it all works fine untill my logon starts say:
"Server connection 10.0.0.3:59954 DENIED, not an allowed IP.
"Server connection 10.0.0.3:59963 DENIED, not an allowed IP.

And so on.

My world.exe tells me:
Authenticating.....
Authenticating timed out.

My configs are:

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host - The hostname that the database is located on
* LogonDatabase.Username - The username used for the mysql connection
* LogonDatabase.Password - The password used for the mysql connection
* LogonDatabase.Name - The database name
* LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


/* Host Directive
*
* This is the address that the realmlist will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* Note: ISHost is the interserver communication listener.
*/

<Listen Host = "radicalwow.servegame.com"
ISHost = "radicalwow.servegame.com"
RealmListPort = "3724"
ServerPort = "8093">

/* Server console logging level
*
* This directive controls how much output the server will
* display in it's console. Set to 0 for none.
* 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*/

<LogLevel Screen = "0"
File = "-1">

/* Account Refresh Time
*
* This controls on which time interval accounts gets
* refreshed. (In seconds)
* Default = 600
* 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
* These two directives set up which clients will be
* allowed to authenticate with the realm list.
*
* Set these to the same builds that the server was
* compiled for.
*
* As of the last update, version 3.3.3 was build 11685, patch 3.3.3a is 11723.
*/

<Client MinBuild = "11685"
MaxBuild = "11723">

/* WorldServer Setup
*
* RemotePassword
* This directive controls the password used to authenticate with the worldserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
* Default: "change_me_logon"
*
* AllowedIPs
* This section MUST be completed, otherwise all attempts to link your servers will fail.
* These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
* to make server connections to your logonserver, and register realms.
* For example, everything in the 127.0.0.* range would be:
* 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
* To allow a single IP,
* 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
* AllowedModIPs
* In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
* (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
* Address:
* The address (no port) of the server.
*
* Port:
* The port on which the logon server listens. (*** NOT 3724 ***)
*
* Name:
* Not really relavant, but name the logon.
*
* RealmCount:
* The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "radicalwow.servegame.com"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

/******************************************************
* Realm Section
*
* Name:
* The name of the realm.
*
* Address:
* The address (and port) of that realm.
*
* Icon:
* The type of realm (PVP, Normal, RPPVP, RP)
*
* TimeZone:
* The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
* 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
* Population:
* (0 = low, 1 = medium, 2 = high)
*
* Important information below
*
* change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
* This issues come up a lot!
*
* Timezone values :
* 0=Korean 16=China
* 1=Development 17=CN1
* 2=United States 18=CN2
* 3=Oceanic 19=CN3
* 4=Latin America 20=CN4
* 5=Tournament 21=CN5
* 6=Korean 22=CN6
* 8=English 23=CN7
* 9=German 24=CN8
* 10=French 25=Tournament
* 11=Spanish 26=Test Server
* 12=Russian 27=Tournament
* 13=Tournament 28=QA Server
* 14=Taiwan 29=CN9
* 15=Tournament 30=TestServer2
******************************************************/

<Realm1 Name = "RadicalWoW PvP server"
Address = "radicalwow.servegame.com:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
* Database.Host - The hostname that the database is located on
* Database.Username - The username used for the mysql connection
* Database.Password - The password used for the mysql connection
* Database.Name - The database name
* Database.Port - Port that MySQL listens on. Usually 3306.
* Database.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "character" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
* Host
* This is the address that the server will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* WorldServerPort
* This is the port that the world server listens on.
* It has to be the same as what is specified in the
* realms table in the LogonDatabase.
* Default: 8129
*
******************************************************/

<Listen Host = "radicalwow.servegame.com"
WorldServerPort = "8129">

(only needed information about world.conf

Please help!

[Toffster]

This should be it.

You have this below in your logon: remote pass is ascent here.
<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

Should be the same in the other config. Saw it before but can't seem to fnd it again to paste it for you.

That would probably be because you cut off the bottom bit of the world config. It's in there somewhere I beleive.

[fstenbergp]

Yea. I've done that now.

but now i got a new problem. My logon.exe tells me Succes! Ready for connections
And my world.exe tells me: Connection Failed. Will try again in 10 seconds.

Heres my configs again with my edits. ( Still cutting bottum off world but the password thing is fixed now :-) ).

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host - The hostname that the database is located on
* LogonDatabase.Username - The username used for the mysql connection
* LogonDatabase.Password - The password used for the mysql connection
* LogonDatabase.Name - The database name
* LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


/* Host Directive
*
* This is the address that the realmlist will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* Note: ISHost is the interserver communication listener.
*/

<Listen Host = "radicalwow.servegame.com"
ISHost = "radicalwow.servegame.com"
RealmListPort = "3724"
ServerPort = "8093">

/* Server console logging level
*
* This directive controls how much output the server will
* display in it's console. Set to 0 for none.
* 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*/

<LogLevel Screen = "0"
File = "-1">

/* Account Refresh Time
*
* This controls on which time interval accounts gets
* refreshed. (In seconds)
* Default = 600
* 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
* These two directives set up which clients will be
* allowed to authenticate with the realm list.
*
* Set these to the same builds that the server was
* compiled for.
*
* As of the last update, version 3.3.3 was build 11685, patch 3.3.3a is 11723.
*/

<Client MinBuild = "11685"
MaxBuild = "11723">

/* WorldServer Setup
*
* RemotePassword
* This directive controls the password used to authenticate with the worldserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
* Default: "change_me_logon"
*
* AllowedIPs
* This section MUST be completed, otherwise all attempts to link your servers will fail.
* These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
* to make server connections to your logonserver, and register realms.
* For example, everything in the 127.0.0.* range would be:
* 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
* To allow a single IP,
* 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
* AllowedModIPs
* In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
* (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "frederiksp"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
* Address:
* The address (no port) of the server.
*
* Port:
* The port on which the logon server listens. (*** NOT 3724 ***)
*
* Name:
* Not really relavant, but name the logon.
*
* RealmCount:
* The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

/******************************************************
* Realm Section
*
* Name:
* The name of the realm.
*
* Address:
* The address (and port) of that realm.
*
* Icon:
* The type of realm (PVP, Normal, RPPVP, RP)
*
* TimeZone:
* The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
* 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
* Population:
* (0 = low, 1 = medium, 2 = high)
*
* Important information below
*
* change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
* This issues come up a lot!
*
* Timezone values :
* 0=Korean 16=China
* 1=Development 17=CN1
* 2=United States 18=CN2
* 3=Oceanic 19=CN3
* 4=Latin America 20=CN4
* 5=Tournament 21=CN5
* 6=Korean 22=CN6
* 8=English 23=CN7
* 9=German 24=CN8
* 10=French 25=Tournament
* 11=Spanish 26=Test Server
* 12=Russian 27=Tournament
* 13=Tournament 28=QA Server
* 14=Taiwan 29=CN9
* 15=Tournament 30=TestServer2
******************************************************/

<Realm1 Name = "RadicalWoW PvP server"
Address = "127.0.0.1:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
* Database.Host - The hostname that the database is located on
* Database.Username - The username used for the mysql connection
* Database.Password - The password used for the mysql connection
* Database.Name - The database name
* Database.Port - Port that MySQL listens on. Usually 3306.
* Database.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "character" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
* Host
* This is the address that the server will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* WorldServerPort
* This is the port that the world server listens on.
* It has to be the same as what is specified in the
* realms table in the LogonDatabase.
* Default: 8129
*
******************************************************/

<Listen Host = "127.0.0.1"
WorldServerPort = "8129">

[Toffster]

As I'm now on my iPod I cannot copy and paste for you, however I can tell you that your listen host should be 0.0.0.0 and not changed. Your realm address should be the ip you want them to connect to, if your public, so should the login server address. This ip should also be in the logon's permission bit at the bottom.

[fstenbergp]

Well i cant find my realm adress.. what config is it in? o_o.. stupid question but i have to ask.

Adn should it be a IP or can it be radicalwow.servegame.com if i have made it for that in no-ip.com or dyndns.com?

[Pedregon]

whatismyip.org

[Toffster]

You may use that, your realm address is at the bottom of your realms config. It says realm1name and underneath it says address.

Edit: Pedregon, he was not asking what his ip address was

[Pedregon]

Make sure your remote password is the same for both logon and world.

[Toffster]

We have already done that pedregon, please read the posts above first

Any updates? Is it working or not?

[Pedregon]

Well then change

<LogonServer RemotePassword = "frederiksp"

to ascent? as said above?

[Toffster]

The pass is now that in both. That's what he wants it to be, still need an update!