Hi all, really need help setting up my own server

[Laniax]

Host file should look like

 
127.0.0.1            eternitywarcraft.no-ip.biz
INTERNAL IP       eternitywarcraft.no-ip.biz
EXTERNAL IP     eternitywarcraft.no-ip.biz

Realmlist is fine
Logon.conf is fine



Realms.conf:

<Realm1 Name = "Eternity Warcraft 3.2.2"
	Address = "eternitywarcraft.no-ip.biz:8129" 
	Icon = "PVP"
	Population = "1.0"
	TimeZone = "1">

Remove the whole realm2 part!

<LogonServer Address = "127.0.0.1"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

world.conf is fine too

[johnyelland1234]

thanks

I made the changes, and I can login to my server if the realmlist is pointed to 192.168.2.6 (servers internal).

But not eternalwarcraft.no-ip.biz (I get a connection error)

Also I have realm looping when selecting the realm.

Any ideas?

[Kiev]

Apply what Laniax suggested, and also change this:

<Listen Host = "192.168.2.6"
        ISHost = "eternitywarcraft.no-ip.biz"
        RealmListPort = "3724"
        ServerPort = "8093">

To:

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

[johnyelland1234]

done that still no luck. Looping on login.

Checked all the ports with port checker too.

[Laniax]

done that still no luck. Looping on login.

Checked all the ports with port checker too.

what DB are you using?
Make sure it supports your arcemu revision.

[johnyelland1234]

that may be the problem, I copied a DB from Fusion Arcemu 3.2.2 as I had trouble compiling the trunk program.

I get no errors on the arcemu-world or logon screens.

would you happen to know a place where I can download the dbc extractor for this arcemu version? Rather than compiling it.

[treetree]

1. change the game realmlist back to
127.0.0.1,,

2. your client realmlist should be 127.0.0.1

3. if ok, then download no-ip updater

4. replace realmlist.conf to no-ip address and run no ip updater

5. configure no-ip updater to show external ip address

6. test

7. replace client reamlist to no-ip address

8. test

if no configure ports

9. ports blocked,,

open ports 3724 and 8129

to see what ports are trying to connect
download a p2p tracker,, peerguardian,,

port map:

1. 3724 logon server

2. 8129 realms server

tree

[johnyelland1234]

ok, i changed my realmlist to 127.0.0.1 (even though the computer with the wow client on it connects to another pc)

changed my realm to 127.0.0.1.

I got a no connection error. - I changed the realmlist to my servers internal ip, and im back to the loop.

I already have the no-ip updator and its all updated.

I've openned all of the required ports and tested them with port checker.

Still have the loop.

Could the DBC files be the cause of this?

[Laniax]

I dont mean client DBC files, i mean the DB your using? like WhyDB or something similiar?

are your world/char tables actually filled?

[treetree]

[QUOTE=johnyelland1234;1783860]ok, i changed my realmlist to 127.0.0.1 (even though the computer with the wow client on it connects to another pc)


do you have 2 pcs on the same network

1 with the server and

another pc trying to connect,,

tree

[Kiev]

Post me your new UPDATED configs please.

[johnyelland1234]

Im using WhyDB - Everthing seemed to work ok when I ran it.

I have 2 pcs, one is a normal desktop which has my warcraft client on it and that connects to a router via ethernet and the router then connects to the server unit.

[johnyelland1234]

here are my updated configs:

/
***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host      - The hostname that the database is located on
* LogonDatabase.Username  - The username used for the mysql connection
* LogonDatabase.Password  - The password used for the mysql connection
* LogonDatabase.Name      - The database name
* LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type      - Client to use. 1 = MySQL 
* Not supported:          - 2 = PostgreSQL (Partly implemented)
* Not Supported:          - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "127.0.0.1"
               Username = "root"
               Password = "ascent"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


/* Host Directive
*
*    This is the address that the realmlist will listen on.
*    To listen on all addresses, set it to 0.0.0.0
*    Default: 127.0.0.1 (localhost)
*
*    Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

/* Server console logging level
*
*    This directive controls how much output the server will
*    display in it's console. Set to 0 for none.
*    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
*    Default: 3
*/

<LogLevel Screen = "0"
          File = "-1">

/* Account Refresh Time
*
*    This controls on which time interval accounts gets 
*    refreshed. (In seconds)
*    Default = 600 
*    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*    
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
*    These two directives set up which clients will be
*    allowed to authenticate with the realm list.
*
*    Set these to the same builds that the server was
*    compiled for.
*
*    As of the last update, version 3.1.3 was build 9947.
*/

<Client MinBuild = "10482"
        MaxBuild = "99999">

/* WorldServer Setup
*
*  RemotePassword
*    This directive controls the password used to authenticate with the worldserver.
*    It must be the same between the two configs. If it is not, your server will
*    not register.
*
*    Default: "change_me_logon"
*
*  AllowedIPs
*    This section MUST be completed, otherwise all attempts to link your servers will fail.
*    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
*    to make server connections to your logonserver, and register realms.
*    For example, everything in the 127.0.0.* range would be:
*         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
*    To allow a single IP,
*         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
*  AllowedModIPs
*    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
*    (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "logon"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
*    Address:
*      The address (no port) of the server.
*
*    Port:
*      The port on which the logon server listens. (*** NOT 3724 ***)
*
*    Name:
*      Not really relavant, but name the logon.
*
*    RealmCount:
*      The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "eternitywarcraft.no-ip.biz"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

/******************************************************
* Realm Section
*
*    Name:
*      The name of the realm.
*    
*    Address:
*      The address (and port) of that realm.
*
*    Icon:
*      The type of realm (PVP, Normal, RPPVP, RP)
*
*    TimeZone:
*      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
*       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
*    Population:
*      (0 = low, 1 = medium, 2 = high)
*
*   Important information below
*
*     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
*     This issues come up a lot!
*
* 	Timezone values :
*	0=Korean                                16=China
*	1=Development				17=CN1
*	2=United States				18=CN2
*	3=Oceanic				19=CN3
*	4=Latin America				20=CN4
*	5=Tournament				21=CN5
*	6=Korean				22=CN6
*	8=English				23=CN7
*	9=German				24=CN8
*	10=French				25=Tournament
*	11=Spanish				26=Test Server
*	12=Russian				27=Tournament
*	13=Tournament				28=QA Server
*	14=Taiwan				29=CN9
*	15=Tournament				30=TestServer2
******************************************************/

<Realm1 Name = "Eternity Warcraft"
	Address = "eternitywarcraft.no-ip.biz:8129" 
	Icon = "PVP"
	Population = "1.0"
	TimeZone = "1">

[CODE]/***********************************************************************
* ArcEmu Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's world server below.
***********************************************************************
***********************************************************************
* Database Section
*
* Database.Host - The hostname that the database is located on
* Database.Username - The username used for the mysql connection
* Database.Password - The password used for the mysql connection
* Database.Name - The database name
* Database.Port - Port that MySQL listens on. Usually 3306.
* Database.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
*******************************************************/

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "char" Port = "3306" Type = "1">


/******************************************************
* Listen Config
*
* Host
* This is the address that the server will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* WorldServerPort
* This is the port that the world server listens on.
* It has to be the same as what is specified in the
* realms table in the LogonDatabase.
* Default: 8129
*
******************************************************/

<Listen Host = "0.0.0.0"
WorldServerPort = "8129">





/******************************************************
* LogonServer Setup
*
* DisablePings
* This directive controls whether pings will be sent to the logonserver to check
* if the connection is still "alive". Expect problems if it is disabled.
* Default: 0
*
* RemotePassword
* This directive controls the password used to authenticate with the logonserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
******************************************************/

<LogonServer DisablePings = "0"
RemotePassword = "logon">



/******************************************************
* Remote Console Setup
*
* These directives control the remote administration console.
*
* Enabled
* If you want to enable the remote administration console, set this.
* Default: 0
*
* Host
* This is the interface the RA server listens on.
* Default: "0.0.0.0"
*
* Port
* This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
* Default: 8092
*
******************************************************/

<RemoteConsole Enabled="0"
Host="0.0.0.0"
Port="8092">



/CODE]


^^ Hadtrouble putting this in code for some reason - and so removed all the unimportant options from this post

[johnyelland1234]

my char table has nothing in it, could this cause a looping problem?

I ran Why DB again but theres only a option for the world database

[Kiev]

<LogonServer Address = "127.0.0.1"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

Try changing what you had to that. And report back.