Arcemu question / problem

[Maceaxe]

Hello mmowned!
for about 2 weeks i have been trying to set up my arcemu server and making it public etc and making it the way i want. However i keep bumping into a problem that is litterelly killing me
1. My problem
My problem is that when i go into wow and everything and type in my user and pass it loads until it gets to success where it takes about 2 minutes before it moves onto the realm selection, i see my realm there but when i click on it it says connecting to game server thing and then it takes about 2 mins (obviously trying to connect) but then i just get sent back to the realm selection page I will post my arcemu-realms and the other one logonserver but if you need anything else feel free to ask:

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision rev.1875
#######################################################################

#********************************************************************************
#* How to use this config file:                                                 *
#* Config files are in a block->variable->setting format.                       *
#* A < signifies the opening of a block, the block name is expected after that. * 
#* After the block name, a space and then the settings sperated by = / ' '.     *
#*                                                                              *
#* e.g.                                                                         *
#* <block setting="0" someval = "1">                                            *
#*                                                                              *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
#* of the line, or in shell format (#).                                         *
#********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#      The address (no port) of the server.
#
#    Port:
#      The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#      Not really relavant, but name the logon.
#
#    RealmCount:
#      The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "invisi-wow.servegame.org"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#      The name of the realm.
#    
#    Address:
#      The address (and port) of that realm.
#
#    Icon:
#      The type of realm (PVP, Normal, RPPVP, RP)
#
#    TimeZone:
#      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
#       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
#    Population:
#      (0 = low, 1 = medium, 2 = high)
#
#   Important information below
#
#     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
#     This issues come up a lot!
#
# 	Timezone values :
#	0=Korean				16=China
#	1=Development				17=CN1
#	2=United States				18=CN2
#	3=Oceanic				19=CN3
#	4=Latin America				20=CN4
#	5=Tournament				21=CN5
#	6=Korean				22=CN6
#	8=English				23=CN7
#	9=German				24=CN8
#	10=French				25=Tournament
#	11=Spanish				26=Test Server
#	12=Russian				27=Tournament
#	13=Tournament				28=QA Server
#	14=Taiwan				29=CN9
#	15=Tournament				30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Invisi WoW"
	Address = "88.110.84.253:8129" 
	Icon = "PVP"
	Population = "1.0"
	TimeZone = "8">

That was the realms

#######################################################################
# ArcEmu Realms Configuration File  
# Last updated at rev.1875
#######################################################################


# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
               Username = "root"
               Password = "root"
               Name     = "characters"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "invisi-wow.servegame.org"
        ISHost = "10.0.0.12"
        RealmListPort = "3724"
        ServerPort = "8093">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600 
#    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
#    
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "9183"
        MaxBuild = "9999">

# WorldServer Setup
#
#  RemotePassword
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#
#  AllowedIPs
#    This section MUST be completed, otherwise all attempts to link your servers will fail.
#    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
#    to make server connections to your logonserver, and register realms.
#    For example, everything in the 127.0.0.* range would be:
#         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
#    To allow a single IP,
#         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
#  AllowedModIPs
#    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
#    (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "johved"
             AllowedIPs = "10.0.0.12/24"
             AllowedModIPs = "10.0.0.12/24">

Thats logonserver
oh and some info you may need?
static ip setup for port forwarding: 10.0.0.12
external ip address:88.110.84.253
Also i use dyndns to put my server public and i use johveds youtube repack.

2. question.
In my johveds repack it comes with a website that looks awesome and stuff but its written in a language i dont understand I wanted to see a html one or something where i could take more control over it. I only want to make it so when you sign up in the create sql bit for a the gm level it uses a custom gm rank i made for a fun server (.cheat fly and other fun commands) Anyone know any websites easy to set up and work in arcemu?

Anyway i hope you can help you in my struggle to dominate the world lol anyway bb
-maceaxe

[september]

Do a search for Realm Loop

[Reflection]

Realms

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

Logonserver:

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

<LogonServer RemotePassword = "johved"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

changes marked with red.

[Maceaxe]

but i want to use my dyndns server as realmlist?? will i still use invisi-wow.servegame.com as realmlist or my ip?

[Reflection]

Your realmlist should be set to 127.0.0.1 and those who're trying to connect should use your dns.

[Maceaxe]

Your realmlist should be set to 127.0.0.1 and those who're trying to connect should use your dns.

Ok ty. i read somewhere else it could be very easily a router port not being forwarded correctly and its very common that most guides that claim to "foolproof guide: how to get your server public" tend to forget huge parts of the guide and how if the writers of these guides use linkys routers they have some ports forwared for them, so im gonna try forward some extra ports see if that helps

[jackthripper]

If you use a router you will have to forward ports. if you dont use a router, you dont have to.