[Help] Unable to connect to realm list server.

[Zordin]

Whenever i try to login after i made my server public i get this error "Unable to connect to realm list server", but it works fine on local server.
Heres my config files:
Realms.conf

#********************************************************************************
#* How to use this config file:                                                 *
#* Config files are in a block->variable->setting format.                       *
#* A < signifies the opening of a block, the block name is expected after that. * 
#* After the block name, a space and then the settings sperated by = / ' '.     *
#*                                                                              *
#* e.g.                                                                         *
#* <block setting="0" someval = "1">                                            *
#*                                                                              *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
#* of the line, or in shell format (#).                                         *
#********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#      The address (no port) of the server.
#
#    Port:
#      The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#      Not really relavant, but name the logon.
#
#    RealmCount:
#      The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
    Port = "8093"
    Name = "Default Realm"
    RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#      The name of the realm.
#    
#    Address:
#      The address (and port) of that realm.
#
#    Icon:
#      The type of realm (PVP, Normal, RPPVP, RP)
#
#    TimeZone:
#      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
#       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
#    Population:
#      (0 = low, 1 = medium, 2 = high)
#
#   Important information below
#
#     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
#     This issues come up a lot!
#
#     Timezone values :
#    0=Korean                16=China
#    1=Development                17=CN1
#    2=United States                18=CN2
#    3=Oceanic                19=CN3
#    4=Latin America                20=CN4
#    5=Tournament                21=CN5
#    6=Korean                22=CN6
#    8=English                23=CN7
#    9=German                24=CN8
#    10=French                25=Tournament
#    11=Spanish                26=Test Server
#    12=Russian                27=Tournament
#    13=Tournament                28=QA Server
#    14=Taiwan                29=CN9
#    15=Tournament                30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Test Realm"
    Address = "machinima-wow.servegame.com:8129" 
    Icon = "PVP"
    Population = "1.0"
    TimeZone = "8">

Logonserver.conf

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "127.0.0.1"
               Username = "root"
               Password = "***"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600 
#    600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
#    
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "9464"
        MaxBuild = "10000">

# WorldServer Setup
#
#  RemotePassword
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#
#  AllowedIPs
#    This section MUST be completed, otherwise all attempts to link your servers will fail.
#    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
#    to make server connections to your logonserver, and register realms.
#    For example, everything in the 127.0.0.* range would be:
#         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
#    To allow a single IP,
#         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
#  AllowedModIPs
#    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
#    (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "123"
             AllowedIPs = "127.0.0.1/24"
             AllowedModIPs = "127.0.0.1/24">

Hosts file:

# Copyright (c) 1993-1999 Microsoft Corporation
#
# Dette er en eksempel på en HOSTS-fil som brukes av Microsoft TCP/IP for Windows.
#
# Denne filen inneholder tilordninger av IP-adresser til vertsnavn. Alle
# oppføringer må være på hver sin linje. IP-adressen plasseres i den
# første kolonnen, etterfulgt av det tilsvarende vertsnavnet. IP-adressen
# og vertsnavnet må være adskilt av minst ett mellomrom.
#
# I tillegg kan kommentarer (som denne) settes inn på egne linjer, eller
# etter maskinnavnet, anført med et nummertegn ("#")
#
# Eksempel:
#
#      102.54.94.97     rhino.acme.com          # kildeserver
#       38.25.63.10     x.acme.com              # x-klientvert

127.0.0.1       machinima-wow.servegame.com
10.0.0.138        machinima-wow.servegame.com
80.212.149.175  machinima-wow.servegame.com

All ports are open.
+Rep to the one who solves this for me

[cheeky1962]

have you changed the realm.wtf file in you're wow account to read the server address ???

e.g. set realmlist machinima-wow.servegame.com


using what u had listed......

<LogonDatabase Hostname = "127.0.0.1"
Username = "root"
Password = "***"
Name = "logon"
Port = "3306"
Type = "1">

the name you have "logon" must be the name that you have called you're realm database ....

e.g. "realmd" or whatever you called it in the database where the realm info is listed as here

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Realm"
RealmCount = "1">

[Anthonyrox8]

search my name 1 of my threads is a post specificlly to solve this problem

Link here http://www.mmowned.com/forums/emulat...o-hamachi.html
should be all the things u need