-=/PryDevServer-4TC:\=- Trinity Core!

[lorac]

Nope im sorry i cant
Bots are out of all cores at the moment due to a core rewrite
and it looks like its going to be a while before we can get them back in core as everything needs to be written to the new script and unit systems
As for vmaps
No they are not....
and with out vmaps you can play
Turn the config options off
And i did say i was working on moving the files
Not exactly my idea of fun but some hater decided to report us to SF For no source access
So i put an end to it!
next time i will just walk away and not release anything again

I put to much time into this project for some jerk to cry to source forge because of out dated source code

Now the leach can cry all they want its a private storage WE PAY FOR
and if reports come in that we got a complaint again ....ill just kill the project
Well the Core side of the project
and all my files will be deleted and the repack side of the project will be closed

New Repack location is Ultracore Distribution

Please note x64 bins are coming I have to wait on Pryd to compile them
you will find The Vmap support here

[zimzim]

hey lorac is the shadowmourne scripted?

[lorac]

Not completely like blizz yet no
but some parts are

[zimzim]

ah.. will that be included on v13?

[Meagree]

I don't mean to be a dick, but is the OP up to date in how to create the server? Or can someone give me directions as to how to use the Repack?

[Willzy]

@Lorac Alright, thanks for using your time to make this repack, and I hope some ass doesn't try to report you guys again. Also, could you write a guide on how to play without the vmaps? And also, how come you guys just let your server die? Why don't you recreate it, add all the great functions it had before, and advertise for it? You guys could make an insanely big amount of money + with this thread hitting over 1,000 views daily you could be the best private server easily. I know it'd take a long time, but you could really get like, 10,000 people to join.

[homiebrah]

I don't mean to be a dick, but is the OP up to date in how to create the server? Or can someone give me directions as to how to use the Repack?

Try looking back a few pages. The directions are there.

[Meagree]

Try looking back a few pages. The directions are there.

I tried this, but it seems the VmapsSupport link is broken? How can I go around this? Is it downloadable from anywhere else?

Thanks

EDIT: On further inspection, the Core Installer link appears to be broken as well. Is it not uploaded or is the link faulty?

[52836400]

Hey, so the repack is just most awesome of all, I bet you know that already.
But I got a problem. So I got 2 computers on same IP and I started the emu on one and I can connect with that, but another pc gets stuck on Authenetic or Realm select could anyone help me? Ports are forwarded. Or maybe you can send me worldserver.conf and autherserver.conf configurated for my dns - gwow.dyndns-ip.com ?

[Cyrez]

Hey, so the repack is just most awesome of all, I bet you know that already.
But I got a problem. So I got 2 computers on same IP and I started the emu on one and I can connect with that, but another pc gets stuck on Authenetic or Realm select could anyone help me? Ports are forwarded. Or maybe you can send me worldserver.conf and autherserver.conf configurated for my dns - gwow.dyndns-ip.com ?

If I understand your post correctly your wanting to make ultracore live on a home network. Here is what you do on a windows machine.
1. Install ultracore as directed along with vmaps
2. Open up your mysql editing software, navicat or equivalent
3. Open your login database (this is labeled auth in the v12 release) and in the table window open realmlist. Put gwow.dyndns-ip.com where it says address. This will most likely replace the 127.0.0.1 which is the default ip. Save your changes and restart your mysql server.
4. Open up autherserver.conf and change the bind ip from 0.0.0.0 to the server computers network ip. (This is usually something like 192.168.1.100) if you don't no it you can open a dos prompt and type in ipconfig and hit enter the ipv4 address is what you want. Then save and close.
5. Open up worldserver.conf and also change the bind ip address same as above then save and close.
6. now double check that you have your ports forwarded to the correct ip address ports 8085 and 3724 by default forward to the ip address used in steps 4 and 5.
7. make sure that your firewall is set to allow access through those ports as well.
8. Open up wowdirectory\Data\enUS\realmlist.wtf, backup this file then delete what’s in there and add this line without the quotes "set realmlist gwow.dyndns-ip.com"
Now launch both autherserver and worldserver and try to connect if this does not work then there may be other issues preventing it.

[52836400]

If I understand your post correctly your wanting to make ultracore live on a home network. Here is what you do on a windows machine.
1. Install ultracore as directed along with vmaps
2. Open up your mysql editing software, navicat or equivalent
3. Open your login database (this is labeled auth in the v12 release) and in the table window open realmlist. Put gwow.dyndns-ip.com where it says address. This will most likely replace the 127.0.0.1 which is the default ip. Save your changes and restart your mysql server.
4. Open up autherserver.conf and change the bind ip from 0.0.0.0 to the server computers network ip. (This is usually something like 192.168.1.100) if you don't no it you can open a dos prompt and type in ipconfig and hit enter the ipv4 address is what you want. Then save and close.
5. Open up worldserver.conf and also change the bind ip address same as above then save and close.
6. now double check that you have your ports forwarded to the correct ip address ports 8085 and 3724 by default forward to the ip address used in steps 4 and 5.
7. make sure that your firewall is set to allow access through those ports as well.
8. Open up wowdirectory\Data\enUS\realmlist.wtf, backup this file then delete what’s in there and add this line without the quotes "set realmlist gwow.dyndns-ip.com"
Now launch both autherserver and worldserver and try to connect if this does not work then there may be other issues preventing it.

Followed all the steps but now I get "Login server down" or unable to connect.

[Cyrez]

Followed all the steps but now I get "Login server down" or unable to connect.

Ok I don't recommend doing this usually but disable windows firewall on the server pc real quick and try to connect again; if that works you no it's a firewall issue. Don’t forget to turn it back on after testing

[bjorno43]

Actually I had a somewhat simular problem. For me it solved when I just completely emptied bind-ip. So no ip there. Dont ask me why cuz it makes no sense at all. But hey, it works so I dont care, lol

[52836400]

That didn't helped either, but thanks anyway.
Could anyone help me trough team viewer or something?

[lorac]

Prydevserver - UltraCore v12

Has been moved to a new location!
This server is under Major development
Core V 9816
DB TDB33 Modified

Now for the Directions






Step One

Download Core installer

Step Two

Download VmapSupport if you have not done so

This IS A MUST!

Step Three

Install file from step one

Step Four

Install step two

Step Seven

Go into Auth and realmlist Change the build to 12340
( you miss this step you will not have a realm! )

Before ANYONE Asks
This AIO is not compatible with older AIO installs
Do not attempt to update your character db on this release
Do not Attempt to change the Database to YTDB
If you do you "will" Break the repack
We so not AT this time support YTDB or they dont support this core
There will be no support if you do not follow the warning

Before ANYONE REPEATS THE QUESTION

How do i make my server live

Go into your Auth and realmlist
Where you see ip address put your ip address
Then eather go to dyndns.com make an account (RECOMMENDED)
or give your ip to connect (NOT RECOMMENDED)


Ignore warnings most are from new systems and will not impact the server performance

Repack is not Retail Expect bugs
Find a bug go to prydevserver.com/ultracore/forum and post it
if you dont i cant fix

---------- Post added at 12:15 AM ---------- Previous post was at 12:06 AM ----------

I personally shut down my server due to space limits and not only that to insure no one sneaks something into the server that holds code
Security is everything
ive never released something with a virus and dont want to start now

As for pryd he had a drive failure and it was not intentional for the loss of his server
it will be up soon I believe

As for advertising

The project alone costs almost 200 usd a month just to host and handle the bandwidth
And this comes out of mainly the Devs pockets
We dont have any $$ by the end of month to even think of ads

We would like to be successful enough to go and launch a deti server for Pds-uc but atm we just dont have the funds nor the backing
For those who Do back us thank you its because of you we are still able to provide

---------- Post added at 12:23 AM ---------- Previous post was at 12:15 AM ----------

Also
Bind ip 0.0.0.0
On Both configs
Only thing you had to edit was the realmlist in your Auth db
With the ip address of the server its running from

---------- Post added at 12:31 AM ---------- Previous post was at 12:23 AM ----------

Oh i missed one

add all the great functions it had before

The defines are no longer in code and we still need to add them
so things can be declared
OR we need to rewrite the whole script for the missing things
This is still on the discussion board

Everyone seems to forget this core is NOTHING like the core that had all the functions in it
I am basically the only one on the coding side of things atm and i cant do everything at one time
top priority atm is stability and then scripting but not till the core is "Stable"
I have already re implimented the
AH bot
Tele-npc 1
Tele-npc 2
and Started the coding for R-S
But this is not an overnight fix or getting everything re Implemented or converted to the new core code style

Also in no way is this post meant in a mean way nor rude way
it was just a quick responce

As for v13
We are addressing the procs of most of the newer items to make them function as blizz intended alot of it is still trial and error as i'm not brilliant 0.o
I wish i was it would speed things up