LAZYBOT support thread, Q&A, requests and updates

[tylen]

I answered u before, but again, same answer: NO
.

so sorry for asking again and thank you for answer

Time to make some contribution as an excuse, here is my Townlong Steppes Fool's Cap spot route; having a miner and herbalist lets you gather Fool's Cap, Green Tea Leaf, Golden Lotus, Ghost Iron Ore and Thrillium Ore (black or white).
Note that the profile has no vendor's name (i see him manually every 48 hours; you can add one's name if you want) so the bot doesnt sell crap \ repair, but only mails ores and herbs every now and then.

http://depositfiles.com/files/t6kl64lv3

[lolbaps]

Jumperu, I tried to make a flying gathering profile but it does not actually navigate/move. I think the bot tries to fly up in the air but I can't fly in Pandaria before level 90. If there are nodes nearby the bot moves to the node to gather as usual.

I tried changing the Z offset in engine settings but it did not resolve this. How did you make your level 87 DK gather? Could you post your exact settings please?

[kckbxrk]

Will there be a version of this for the 64 bit version of WoW? i cannot get it to work as is

[jumperu]

I remember a few pages back with the pally profiles saying they couldnt get the bot to recognize fist of justice. The bot doesnt seem to pick up on spells that change/get replaced. Fist is still considered Hammer in the bot. Same with rogues Dispatch is registered as sinister strike. If you having troubles making your own profiles try changing the name of the ability to what it was b4 the talent/spec changed it. I picked up on this using the Assassination profile on the front page. it would say "Dispatch does not exists on your bars" but it would show sinister strike on the list of buttons found.

@every1 who has this problem
Maybe the bot does not recognize spells placement, or some spells, or holy power/etc, but u must work abit in order to set it up.
For example, if the char is a rogue/druid, it has the 1st bar for when unstealthed, and another 1st bar for when it's stealthed. So, Do not put any spells on bar 1, put all of them on the 2-3-4 bar. Also, don't use any addons like bartender.

Hallo
i have a problem
iam using lazybot 1.5.2
and at first it was able to attach into wow but now it doesnt any more ( i use 64bit windos 7 ultimate) running wow in 32 bit as needed
when it was able to attach back then it dindt press any keys or fly at my route in the profile
pally
any one any idea what i may do wrong?
need help
mfg Gor

Latest version of the bot is black ui, v0.0.7. Get it from the first page.

I wish that was the case I'm using the latest version - the self updating one.
Its still an option under the General settings.

Maybe you are reffering to "Stop after x minutes" option, that is not a pause. Or the relogger function, wich is, well, idk if it works to well.

Jumperu, I tried to make a flying gathering profile but it does not actually navigate/move. I think the bot tries to fly up in the air but I can't fly in Pandaria before level 90. If there are nodes nearby the bot moves to the node to gather as usual.

I tried changing the Z offset in engine settings but it did not resolve this. How did you make your level 87 DK gather? Could you post your exact settings please?

I did not make my dk gather, i never said that. The profiles posted in the first post are grinding. The "z modifier" as far as i know is the distance the bot will stop above a node.
Try recording a flying profile using ur ground mount, but it won't work very well, i suggest grinding until 90 then start gathering.

Will there be a version of this for the 64 bit version of WoW? i cannot get it to work as is

Change ur wow in 32 bit, start the launcher-options-game preferences-32bit always.

Time to make some contribution as an excuse, here is my Townlong Steppes Fool's Cap spot route;

http://depositfiles.com/files/t6kl64lv3

Ty for contributing, i'll link it in the 1st post also.

[Gormagon]

Originally Posted by Gormagon
Hallo
i have a problem
iam using lazybot 1.5.2
and at first it was able to attach into wow but now it doesnt any more ( i use 64bit windos 7 ultimate) running wow in 32 bit as needed
when it was able to attach back then it dindt press any keys or fly at my route in the profile
pally
any one any idea what i may do wrong?
need help
mfg Gor
Latest version of the bot is black ui, v0.0.7. Get it from the first page.



ok i did.

now its able to attach , but

still i loaded a flying profile an a behavoir
but it doesnt move or if i take the charakter near a mob it doesnt fight him,
but it says in the log then [12:18:34] Got into combat with: Starving Helboar
[12:18:45] Combat done, result : Success

and then it doesnt press any key anymore

so it seems to me that the bot isnt able to press any key in the game



12:16:15] Bot stopped
[12:16:23] Reset bar to first
[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Retribution Aura does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Divine Plea does not exist on your bars
[12:16:24] Key: Guardian of Ancient Kings does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Zealotry does not exist on your bars
[12:16:24] Key: Avenging Wrath does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Consecration does not exist on your bars
[12:16:24] Key: Holy Wrath does not exist on your bars
[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Divine Light does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Seal of Truth does not exist on your bars
[12:16:24] Key: Blessing of Might does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Crusader Aura does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Bot started
[12:16:24] [Engine]Initializing
[12:16:24] [Engine]Started bot thread
[12:16:24] Periodic relog enabled. Next logout in: 90 minutes
[12:16:54] Bot stopping: Could not mount


but i did set up all the general settings corrrectly its just not able to pres a button

running wow at 1920 1080 windowmode



net framework 4.5 installed wow 32 opend
Gor please help me

[jumperu]

Originally Posted by Gormagon

[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Retribution Aura does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Divine Plea does not exist on your bars
[12:16:24] Key: Guardian of Ancient Kings does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Zealotry does not exist on your bars
[12:16:24] Key: Avenging Wrath does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Consecration does not exist on your bars
[12:16:24] Key: Holy Wrath does not exist on your bars
[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Divine Light does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Seal of Truth does not exist on your bars
[12:16:24] Key: Blessing of Might does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Crusader Aura does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Bot started
[12:16:24] [Engine]Initializing
[12:16:24] [Engine]Started bot thread
[12:16:24] Periodic relog enabled. Next logout in: 90 minutes
[12:16:54] Bot stopping: Could not mount

Gor please help me

Well, as u can see urself from the log, you don't have any spells on your bars.
Or maybe u have bartender addon, disable all addons when u bot.
Or you did not choose a correct behavior, go to combat settings and from the drop-down choose the correct behavior class.

[Gormagon]

Originally Posted by Gormagon

[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Retribution Aura does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Divine Plea does not exist on your bars
[12:16:24] Key: Guardian of Ancient Kings does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Zealotry does not exist on your bars
[12:16:24] Key: Avenging Wrath does not exist on your bars
[12:16:24] Key: Templar's Verdict does not exist on your bars
[12:16:24] Key: Consecration does not exist on your bars
[12:16:24] Key: Holy Wrath does not exist on your bars
[12:16:24] Key: Judgement does not exist on your bars
[12:16:24] Key: Divine Light does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Key: Seal of Insight does not exist on your bars
[12:16:24] Key: Seal of Truth does not exist on your bars
[12:16:24] Key: Blessing of Might does not exist on your bars
[12:16:24] Key: Word of Glory does not exist on your bars
[12:16:24] Key: Crusader Aura does not exist on your bars
[12:16:24] Key: Holy Light does not exist on your bars
[12:16:24] Bot started
[12:16:24] [Engine]Initializing
[12:16:24] [Engine]Started bot thread
[12:16:24] Periodic relog enabled. Next logout in: 90 minutes
[12:16:54] Bot stopping: Could not mount

Gor please help me
Well, as u can see urself from the log, you don't have any spells on your bars.
Or maybe u have bartender addon, disable all addons when u bot.
Or you did not choose a correct behavior, go to combat settings and from the drop-down choose the correct behavior class.



hi, i did disable all addons and i chose a behavour from the list at the bigining of the thread
it now doesnt say anymore keys missing
but still it doesnt mount or fight

What do i do still wrong?

[fabians19]

Hi, since yesterday im getting this problem:

[3:15:09] Got into combat with: Springtail Gnasher
[3:15:28] Combat done, result : Died
[3:15:28] Going to ress
[3:15:36] Bot stopping: Could not find spirit healer

It works flawless, but everytime i died bot stop, before it released body and used sipirt healer to ress now it doesnt, you guys can help me?

[jumperu]

Hi, since yesterday im getting this problem:

[3:15:09] Got into combat with: Springtail Gnasher
[3:15:28] Combat done, result : Died
[3:15:28] Going to ress
[3:15:36] Bot stopping: Could not find spirit healer

It works flawless, but everytime i died bot stop, before it released body and used sipirt healer to ress now it doesnt, you guys can help me?

Hmm, maybe you changed or unbinded ur interactwithtarget key, check under general settings-keys to be the same keys as in-game.

[fabians19]

Hmm, maybe you changed or unbinded ur interactwithtarget key, check under general settings-keys to be the same keys as in-game.

well i dont think so, so it must be windows 8 creating the problem i just realized that since i installed it (tho its weird), the bot can fight well like always, the only problem is cannot rez,

[DevilsFist]

I'm having problem with behaviors.
I'm working with Feral Druid Gathering behavior but the main problem now is that when I face a ranged mob, it doesn't run to melee range.
For example there is archer type of mob, which time to time trap you and run couple of yards away from you and starts shooting with bow. My druid just stands still trying to melee.
Also I can't get ability "Wild Charge" to work. (Tried copying the same rules which jumperu had used in his behaviour, but still does nothing)

There's the behavior file. (edit: unfortunately it uses bar/key commands instead of looking for spell names)
Download Flying Feral Druid.xml from Sendspace.com - send big files the easy way

[jumperu]

I'm having problem with behaviors.
I'm working with Feral Druid Gathering behavior but the main problem now is that when I face a ranged mob, it doesn't run to melee range.
For example there is archer type of mob, which time to time trap you and run couple of yards away from you and starts shooting with bow. My druid just stands still trying to melee.
Also I can't get ability "Wild Charge" to work. (Tried copying the same rules which jumperu had used in his behaviour, but still does nothing)

There's the behavior file. (edit: unfortunately it uses bar/key commands instead of looking for spell names)
Download Flying Feral Druid.xml from Sendspace.com - send big files the easy way

Well, it's simple, in combat settings, down under combat distance u have 40yards..put 5yards=melle range...he will never go to the mob if u set ur cat to attack from 40yrds away :P
Second, under pre-pull remove the cat form- it's uselles since it's a flying behavior, bot will never execute that rule cause he will never initiate the combat.
Also unde combat tab, move cat form to the top, so it's the first spell bot will do.
You will never get it to do wild charge, since u have it almost the last spell, move it under cat form.
Bot is doing the spells from top to bottom.
Also, when you set a condition, at "target" leave it unchanged, it works best, you don't need to target urself if you want to heal (see healing touch)
Analyze: see might of ursoc -idk why at target u set pet, and as conditions: if player hp is under 60% and does not have might of ursoc buff, he will cast might of ursoc?....maybe you wanted to set player hp under 10%.. so he goes bear+last stand as a last resort

So, under combat tab you have to arrange the spells in the order they need to be cast, like:

Cat form
wild charge
healing spells..
last stand spells (might of ursoclay on hands, etc)
berserk spells..
finishing moves..
attack spam spells..

[manninc2000]

Will there be a version of this for the 64 bit version of WoW? i cannot get it to work as is

You need to open WoW with your launcher. (The window that has the ads and news stories about WoW."Launcher.exe") Then you goto Options > Game Preferences > Choose Direct x9 and click Launch 32 bit client. This should get you up and running as long as you have the other components correct.

[shahharsh2010]

Can any 1 gave me mail macro ?
and how to use it because regular mail bot is not removing old name and putting new name so trying to mail 2 ppl at same time and mail fail

Thanks

[EUROBOT]

Bot is doing the spells from top to bottom.

...

So, under combat tab you have to arrange the spells in the order they need to be cast, like:

Cat form
wild charge
healing spells..
last stand spells (might of ursoclay on hands, etc)
berserk spells..
finishing moves..
attack spam spells..

It's so much important when you're doing behaviors. a lot of the comments saying it only casts one or two spells are due to lack of good priorize system considered when doing the behavior. Great comment, Jumperu!