[PE] TeamPhoenix

[sany89]

Updated rotation with extra debug info.

If you need to see why things are not working, just click the debug info button to get a readout of the situation at that moment. (should assist with troubleshooting).

Thx to stinkytwitch for helping me out.

Hi thank you for your work,

i deleted my WTF folder (made a backup) and my Probably_TeamPhoenix folder, i downloaded the updated files and firehack again.

still not working

oh and btw, i found "target.akearea" in the shaman rotation, but not in the warrior rotation, could this be an issue?

thanks!

[akeon1]

Hi thank you for your work,

i deleted my WTF folder (made a backup) and my Probably_TeamPhoenix folder, i downloaded the updated files and firehack again.

still not working i think i give up..

oh and btw, i found "target.akearea" in the shaman rotation, but not in the warrior rotation, could this be an issue?

thanks!

warrior rotation is "player.akearea" as a workaround just change it to "player.area"

in this section

{{ --SmartAE { "Bloodbath" },
{ "Bloodthirst", { "!player.buff(Enrage)" } },
{ "Bloodthirst", { "!player.buff(Raging Blow!)" } },
{ "Raging Blow", { "player.buff(Meat Cleaver).count >= 3 ", "player.buff(Enrage)" } },
{ "Raging Blow", { "!player.buff(Raging Wind)", "player.buff(Enrage)" } },
{ "Whirlwind", { "player.buff(Raging Wind)", "player.buff(Enrage)" } },
{ "Whirlwind", { "player.buff(Meat Cleaver).count < 3", "player.buff(Enrage)" } },
{ "Ravager", { "talent(7,2)", "player.buff(Enrage)", "target.ttd > 40" }, "target.ground" },
{ "Bladestorm", "player.buff(Enrage).duration >= 5" },
{ "Execute", "player.buff(Sudden Death)" },
{ "Dragon Roar", { "player.buff(Enrage)" } },
{ "Bloodthirst" }
}, { "modifier.multitarget", "player.akearea(.enemies >= 4" } },

[sany89]

warrior rotation is "player.akearea" as a workaround just change it to "player.area"

in this section

i did exactly like this and it is still not working o0 no AoE abilities

i got this error:


Error occured in: Global

Message: ...erface\AddOns\Probably\system\protected\firehack.lua line 53:
attempt to concatenate local 'distance' (a nil value)
Debug:
[C]: ?
...erface\AddOns\Probably\system\protected\firehack.lua:53: UnitsAroundUnit()
Probably\system\conditions\core.lua:1221:
Probably\system\conditions\core.lua:1219
Probably\system\core\dsl.lua:52:
Probably\system\core\dsl.lua:20
(tail call): ?
Probably\system\core\parser.lua:195: nested()
Probably\system\core\parser.lua:273: table()
Probably\system\timers\rotation.lua:71: cycle()
Probably\system\timers\rotation.lua:131: event()
Probably\system\core\timer.lua:16:
Probably\system\core\timer.lua:11
Locals:

AddOns:
Swatter, v5.21d2.5561 (SanctimoniousSwamprat)
Probably, v
ProbablyMrTheSoulz, v
ProbablyNevoProfilesWOD, v
ProbablyTeamPhoenix, v
ProbablySim, v
BlizRuntimeLib_enUS v6.1.2.60100 <none>
(ck=e09)

i used multitarget abilities, after i changed player.akearea to player.area and this error is what i got

oh and btw, the shaman rotation is working fine!

[akeon1]

firehack protected errors generally mean it has not injected properly.

Try starting firehack at the character selection screen before entering the game world.

But it doesn't make sense. If player.area(x).enemies doesn't work I am at a loss.

The new version should have a new debug information button on the very right of the action bar. Wich opens two little Windows.

If you engage 4 or 5 mobs, target then one at a time (Being careful not to kill them)--then take a screenshot of the debug windows and pm me the link.

[LtButterman]

any reason why Unleash Flame isn't being used for Ele shaman rotation?

[akeon1]

any reason why Unleash Flame isn't being used for Ele shaman rotation?

It is if:
- you are moving
- you have unleashed fury talented.

any other circumstance is a dps loss and i would sugest you go read blinkenstein's ele shaman guide

[yobleed]

Did anyone notice that freeze isn't working correctly? When AOE is enabled my pet casts it but it didn't take effect. It's wasting my Freeze on something not sure what though....
Sorry if this issue was alrdy adressed!


EDIT: Figured out Water Jet is sharing CD's with Freeze.
EDIT(2): Changed some things of the Script

Line 29 to 30: Reenabling Evanesce in Stress Situations for extra Survivabillity

-- Survival Abilities
 	{"Cold Snap", { "player.spell(Evanesce).cooldown > 1", "!player.buff(Evanesce)", (function() return dynamicEval("player.health <= " .. fetch('phoenixFrost', 'evanesce_spin')) end), (function() return fetch('phoenixFrost', 'evanesce_check') end) }}, -- Evanesce  Cold Snap Refresh

Line 93 to 95: Extra Freeze When 2 mobs are Adjacent, Mousover Freeze when Main Focus is on Boss and Adds spawn,

 
{ "!33395", "target.akearea(8).enemies >= 2", "mouseover", "target.ground"}, -- Mouseover Freeze
{ "!33395", "target.akearea(8).enemies >= 2", "target.ground"}, --- Freeze
	{ "135029" }, --- Water Jet

not tested thoroughly yet.

[akeon1]

Paladin
Change default Ret Pally AE Mode. Should result in increase DPS for the
majority who may or may not realize there were two different AE modes and given majority seem to use Final Verdict.

Shaman
Bit of shammy love. Added AE mode selector:
Choosing Full AE in the gui follows all normal AE rules.
Choosing Single/Cleave will not use full AE but rather continue single target rotation weaving EQ and CL.

[LatinPrince]

Have some problems switching targets with the Ele Shaman rotation, I try to manually switch but if a target is attacking me or even if I'm taking damage from a boss ability already on the ground and I have no direct interaction with that mob it forces me to kill the one. I know I can turn auto target off but then it doesn't do anything if a mob dies and you want it to auto switch. Is there a way for it to still auto attack but be a bit more passive about which mob I want to attack?

[akeon1]

Have some problems switching targets with the Ele Shaman rotation, I try to manually switch but if a target is attacking me or even if I'm taking damage from a boss ability already on the ground and I have no direct interaction with that mob it forces me to kill the one. I know I can turn auto target off but then it doesn't do anything if a mob dies and you want it to auto switch. Is there a way for it to still auto attack but be a bit more passive about which mob I want to attack?

You can only target mobs you are in combat with if the autotarget toggle is on

This is by design. Prevents the routine accidentally pulling mobs.

[LatinPrince]

You can only target mobs you are in combat with if the autotarget toggle is on

This is by design. Prevents the routine accidentally pulling mobs.

But that's exactly what it's doing from time to time we're killing off the last mob and before the tank even tries to pull it shoots off and pulls the next set of mobs, which is weird. That's the stuff I'm trying to avoid along with switching to whatever target I want not the rotation but I guess I can play with auto off.

Thanks for the rotation by the way by no means am I complaining, love your work!

[akeon1]

Ok that sounds like a bug. Kinda in hospital atm with atm in a cast so you will need to wait a week or so

[akeon1]

Great news everyone! 6.2 update!!!!! but limited. read on:

Since there are no "Advanced" unlockers that are up to date, i have created a "simple" branch thst will work with basic unlockers.

This means you will have manually toggle on and off Multi target, (and for shaman, cleaves in the gui)

Repeating:
oLUA is a basic unlocker and works with 6,2 ([No Memory Write] LUA UnLocker & Anti AFK)

My "simple" branch works with oLUA here!

Once the advanced unlockers are updated for 6.2 you should download the master version... but this should get you going in the mean time.

Happy Raiding and sorry bout delay, doing this one handed due to elbow surgery yuck!

[akeon1]

update to simple branch: fix tank healing option. (also works for bodyguard when soloing)

Will push to master if and when FH is updated

[Chifo]

Great news everyone! 6.2 update!!!!! but limited. read on:

Since there are no "Advanced" unlockers that are up to date, i have created a "simple" branch thst will work with basic unlockers.

This means you will have manually toggle on and off Multi target, (and for shaman, cleaves in the gui)

Repeating:
oLUA is a basic unlocker and works with 6,2 ([No Memory Write] LUA UnLocker & Anti AFK)

My "simple" branch works with oLUA here!

Once the advanced unlockers are updated for 6.2 you should download the master version... but this should get you going in the mean time.

Happy Raiding and sorry bout delay, doing this one handed due to elbow surgery yuck!

Tks for ur update and us nice work!!!!!

Hope u get well soon from ur surgery!!!!!!!

Take Care....