PQR - Rotation Bot

[crystal_tech]

its prob because i got dual core haha amd anthlon x2 250 with gts 450 might need new pc, anyway i can make wow run on one and pqr run on the other?

open up taskman and goto process tab and find wow.exe in the list, right click and select CPU Affinity and set it to 1 only (0 will be used for pqr and system), do the same with PQR.exe only change it to core 0 only.

however, with that system you should be able to upgrade to a Athlon II X4 with no problem and get a boost, Cost of one in USD is 80ish bucks.
note: if your looking to update to a whole new system then it wouldn't make since dropping a 'older' new CPU in your current.

[sparkyiezz]

open up taskman and goto process tab and find wow.exe in the list, right click and select CPU Affinity and set it to 1 only (0 will be used for pqr and system), do the same with PQR.exe only change it to core 0 only.

however, with that system you should be able to upgrade to a Athlon II X4 with no problem and get a boost, Cost of one in USD is 80ish bucks.
note: if your looking to update to a whole new system then it wouldn't make since dropping a 'older' new CPU in your current.

Thanks, tbf i am just going to buy another pc because i can hardly run any other games anyway so would be the best thing to do so i can play wow in good quality and pqr rrunning no lag what so ever haha

[paintpauller]

Alpha Interrupt has support for the new PQI.
If you have any questions, bugs, or suggestions let me know.
-- -- Version 3.0 -- --
Please submit bugs to me on my thread!
http://www.ownedcore.com/forums/worl...dom-delay.html
-- -- Beta Build -- --

---

Features in this release of Alpha Inturrupt include:

- Full support for PQI and its new UI
- Interrupts Target, Focus, Mouseover, Boss, Arena, and BattleGround (configurable in PQI)
- Battle Ground Interrupt - BETA

> Enables interrupting in battlegrounds by shuffling around your focus to the opposing team and
trying to keep it on targets that are within range to be interrupted. Take caution when using this as
if someone notices that you are changing your focus that much they may start to suspect things!

- Random cast percentage delay

​> Minimum & Maximum percentages are configurable in PQI

> Delays interrupting till cast is after this Percentage

- Random time delay

​​> Minimum & Maximum delay is configurable in PQI

> Delays interrupting for a random amount of time

- Ignore list

​> A custom list of spells to NOT interrupt (configurable in PQI)

- Instant Interrupt list

> A custom list of spells to instantly interrupt, ignoring standard delay settings (configurable in PQI)

- Pause Rotation Hotkey (changeable in PQI)

- Everything can be toggled with PQI & has tooltips

---

Change Log:

- Version 3.0

> Added Mouseover, Boss, and BattleGround
> Added Instant Interrupt list
> Added PQI Interrupt info frame
> Added Update MSG's for PQI
> Fixed IsAddOnLoaded Error!

~ That one took some time to find, was caused when using PQI, the addon was not creating the variables instantly anymore so a simple delay till the variables were set fixed the problem. Looks like this error started showing up around 4 weeks ago for some ppl, for me it started to show up around 6 days ago (i have no idea what was causing this to happen its very odd)

> Made some improvements that should help with FPS loss that some ppl are reporting! Personally i have yet to see FPS loss on any version of this profile, let me know if it helped anyone out =D
> Added Nerder's DK Strangulate/Mindfreeze code
> Fixed Range Checks!

~ There should be no more problems with trying to interrupt when out of range. Pets should be fixed as well but have no way to conferme, if they are not then idk what is going on with them!

- Version 2.2

> Updated to use skull bash - 106839 when spell is known!
> fixed a bug where sometimes it would not interrupt when using random percent or time delay.

- Version 2.1

> Updated update link thanks to jh16 for catching that!

~ Old link was to my modified version of Xelper's Interrupt files - Derp!

> Updated logic for both divineshield & Inner Focus.

~ Should now ignore interrupting when customTarget has that buff
~ Will need a list of more buffs to ignore tho so if anyone can think of them let me know!

- Version 2.0

> Changed the name to Alpha Interrupt
> Added Monk interrupt spell

> Added support for PQI

> Added Random cast percentage delay

> Added an Ignore list

- Version 1.2

> Now ignores targets with divineshield per request

> Added in Update links for future updates

---

Without PQI - PQInterface is RECOMMENDED - Everything should work with the following changes!

> Random cast percentage delay will default to enabled with a minimum percentage of 30 and a max of 50
> Random time delay will default to enabled with a minimum delay of 0.1 and a max of 0.8 seconds
> Ignore list will default to disabled and will have a template list
> Instant Interrupt list will default to disabled and will have a template list
> Interrupt Target, Focus, Mouseover, Boss, and Arena will default to enabled
> Interrupt BattleGround will default to disabled
> Pause Interrupting will be disabled (Requires PQI to be enabled)

To change any setting without PQI go into Ability Editor > Class = INTERRUPT Profile = Alpha Interrupt > Variables: Interrupt, scroll down till you see Default Variables and make the changes you want under there.

---

In-Game PQI Menu

[deadpanstiffy]

- Battle Ground Interrupt - BETA

> Enables interrupting in battlegrounds by shuffling around your focus to the opposing team and
trying to keep it on targets that are within range to be interrupted. Take caution when using this as
if someone notices that you are changing your focus that much they may start to suspect things!

There is no way to track anyone's focus (in the API) except your own.

[Kinkeh]

[/INDENT]
[/LEFT]
[/CENTER]

There is no way to track anyone's focus (in the API) except your own.

Doesn't mean he's tracking someone elses focus, he's stating that he's shuffling your own focus between all of the opposing battlegroups players.

[kuukuu]

Could also scan through all your party's targets but I assume that would likely lag pretty hard in a battleground. Wish there was a way to cycle through the enemies like you can your party but I'm assuming Blizz doesn't have this in order to stop simple bots or something like that.

[deadpanstiffy]

Doesn't mean he's tracking someone elses focus, he's stating that he's shuffling your own focus between all of the opposing battlegroups players.

Lets quote it again:

- Battle Ground Interrupt - BETA

> Enables interrupting in battlegrounds by shuffling around your focus to the opposing team and
trying to keep it on targets that are within range to be interrupted. Take caution when using this as
if someone notices that you are changing your focus that much they may start to suspect things!

It says.... "Take caution"...

And I said:

There is no way to track anyone's focus (in the API) except your own.

There is no caution to take because no one can read what your focus is or how frequent you are changing it.

[firepong]

Could also scan through all your party's targets but I assume that would likely lag pretty hard in a battleground. Wish there was a way to cycle through the enemies like you can your party but I'm assuming Blizz doesn't have this in order to stop simple bots or something like that.

Oh, but there is a very simple way to do this if you could somehow get around the Taint Force error that pops up half the time you read frames

EDIT* To demonstrate, just be in a BG, have the BG frame with all the names on it open ( right click the eye and hit show whatever ) and type in the chat frame /dump WorldStateButton1.name

This can be automated in PQR using:
[php]for i=1,#WorldStateButtonFrame do --Not tested, but should work as that frame only houses the buttons of the players and all these will equal to the total players.--
--Shit to cycle through buttons goes here--
end[php]

[joboy_67]

Oh, but there is a very simple way to do this if you could somehow get around the Taint Force error that pops up half the time you read frames

EDIT* To demonstrate, just be in a BG, have the BG frame with all the names on it open ( right click the eye and hit show whatever ) and type in the chat frame /dump WorldStateButton1.name

This can be automated in PQR using:
[php]for i=1,#WorldStateButtonFrame do --Not tested, but should work as that frame only houses the buttons of the players and all these will equal to the total players.--
--Shit to cycle through buttons goes here--
end[php]

I have tried this yet I never got around that error. Its the only thing from stopping people from making almost lag free PVP profiles for large bgs =P

[xLegendx]

Is there any Auto Flag Returners ?
I haven't seen some in a while and they're very very handy in RBGs

[joboy_67]

Is there any Auto Flag Returners ?
I haven't seen some in a while and they're very very handy in RBGs

I think paintpauler had one released if I'm not mistaken.
Edit: It was a planned feature for AlphaUtilities.

[ImayoboeiI]

Anyone going to make a Fire/Frost mage PvP profile for next patch? Fire will be OP as hell.

[xLegendx]

I think paintpauler had one released if I'm not mistaken.
Edit: It was a planned feature for AlphaUtilities.

Yeah, I was reading what was in it and I didn't see it
but, its not that hard to code I think.

[paintpauller]

There is no caution to take because no one can read what your focus is or how frequent you are changing it.

there is caution to take I dont think there is any way to tell from default UI (never used it lol) but with addons there is a way to see your targets focus or your party members focus just like you can see their targets. partyNfocus targetfocus exc.. are all valid UnitId's and can have unitframes just like you can have unitframes for your parties target and the target off your target. that being said my UI addon (oUF_LUI) does not have options for seeing this but could easily be added in at any time and others might have something like this implemented. also there is not much need to have this information take up UI space as there is not much need to know it so running into someone with the ability to see your focus while possible is very unlikely.

Oh, but there is a very simple way to do this if you could somehow get around the Taint Force error that pops up half the time you read frames

EDIT* To demonstrate, just be in a BG, have the BG frame with all the names on it open ( right click the eye and hit show whatever ) and type in the chat frame /dump WorldStateButton1.name

This can be automated in PQR using:

for i=1,#WorldStateButtonFrame do --Not tested, but should work as that frame only houses the buttons of the players and all these will equal to the total players.--
--Shit to cycle through buttons goes here--
end 

tried that does not give anything usefull lol just errors.

I have tried this yet I never got around that error. Its the only thing from stopping people from making almost lag free PVP profiles for large bgs =P

what is holding back lag free PVP profiles for large bgs? if all you need is say a table with all the BG names and their faction that is very much possible, hell if you wanted you could get even more detailed table with their roll speck class exc if they are carrying the flag and much more. never tried to code for PVP as i have gone straight PVE this xpack so i dont know what is holding back the PVP profiles, i would assume that its for healing profiles but.

[paintpauller]

Is there any Auto Flag Returners ?
I haven't seen some in a while and they're very very handy in RBGs

I think paintpauler had one released if I'm not mistaken.
Edit: It was a planned feature for AlphaUtilities.

Yeah, I was reading what was in it and I didn't see it
but, its not that hard to code I think.

yes it is something that is very simple and something that is planned for the next release of Alpha Utilities, with getting into raiding i needed to use what spare time i had working on that thus the PQI version of avery's ret profile as my ret pally is my main toon and the advance features in Alpha Interrupt. now that all that has settled down some and raiding is starting to go smoother i will have more time to update Alpha Utilities & Alpha Moonkin again.

for those that do not want to wait till the update just add this to a new ability and stick it towards the top of your priority list:

if IsActiveBattlefieldArena() == 1 --we are in a BG
and not UnitIsDeadOrGhost("player") --we are not dead
and ((GetBattlefieldInstanceRunTime()/1000) > 120) then --the BG started
    local Flags = {"Alliance Flag", "Horde Flag", "Netherstorm Flag"}
    for i=1,#Flags do 
        InteractUnit(Flags[i])
end end