[Open Source] Lucky's Spacebot

[Blaarg]

Would it be possible to add the 2nd bonus to Ascendancy Barrier? Or would it be too difficult to target the Blue engine trails for any fighter, especially Heavy Fighters?

[eibtech]

lvl 17, Human Sith Warrior - Marauder

The fail is usually the escort ship is dying <=13s from the end.

You mentioned timesync.. I havent seen that yet in the forums.. i'm probably missing 1 of the hundreds of posts..how do I do that?

Thanks a ton, I'll try those settings and work on it. And yeah once it scores better, I hope to not have the $$ issue either

What seems to be the issue is it doesnt recognize the fighters until they are relatively close to the escort, so they've already gotten a few shots in on it. It almost consistently fails <20s when it does fail. I'm not sure if this information is of any use or not.

k I modified my settings to be the same as the guys a couple posts below and am getting higher than 45% but not much.. here's the sysinfo..

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:4 GB, used:42 %
Desktop dimensions: 1920x1080(32bpp, 59Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =55
IMG Tolerance=103
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Jabiim Escort
Win / Loss 9 / 17

[ekolan]

Mine's having problems finding the mission start img,
What do i do?

It keeps failing calibration, which seems to be the problem

[thorsanvil]

Mine's having problems finding the mission start img,
What do i do?

It keeps failing calibration, which seems to be the problem

with all the reading I have done, and I am going to assume you havent, because your missing your Config information from the about box.

[ekolan]

with all the reading I have done, and I am going to assume you havent, because your missing your Config information from the about box.

That's not very helpful. I'm quite new here and could't find any reading about this.
But really, it would be nice if you helped me out abit more instead of just saying im doing ir wrong

[phagotron]

What seems to be the issue is it doesnt recognize the fighters until they are relatively close to the escort, so they've already gotten a few shots in on it. It almost consistently fails <20s when it does fail. I'm not sure if this information is of any use or not.

k I modified my settings to be the same as the guys a couple posts below and am getting higher than 45% but not much.. here's the sysinfo..

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:4 GB, used:42 %
Desktop dimensions: 1920x1080(32bpp, 59Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =55
IMG Tolerance=103
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Jabiim Escort
Win / Loss 9 / 17

You may want to run Jabiim with bonus off. It tends to aim its own missile trails in this mission.

[ekolan]

You may want to run Jabiim with bonus off. It tends to aim its own missile trails in this mission.

The only changes i can find under options is:
Game tolerance
MIssle delay
On target timer
Timer skew
image tolerance

Also the boxe "enable psx on target timer" is the only one enabled.


But has that something to do with i can't calibrate?

[phagotron]

The only changes i can find under options is:
Game tolerance
MIssle delay
On target timer
Timer skew
image tolerance

Also the boxe "enable psx on target timer" is the only one enabled.


But has that something to do with i can't calibrate?

Look again.

[phagotron]

That's not very helpful. I'm quite new here and could't find any reading about this.
But really, it would be nice if you helped me out abit more instead of just saying im doing ir wrong

You have to unpack the bot to a folder and not run it from the archive file.

[ekolan]

Look again.

Look at yourself.
If you can't be nice, do not bother replying again.
That's not useful at all.

[phagotron]

Look at yourself.
If you can't be nice, do not bother replying again.
That's not useful at all.

Well, much luck then and have a nice day.

[ekolan]

Well, much luck then and have a nice day.

It's not that i dont want your help, but the first few comments weren't helpful at all

[thorsanvil]

That's not very helpful. I'm quite new here and could't find any reading about this.
But really, it would be nice if you helped me out abit more instead of just saying im doing ir wrong

ok, I dont know if you bothered looking at any of say the last 10 pages, I am going to assume not because you should have seen a patern of how people are asking for help.

Also, if you noticed, my post count will now be 2, which reall should tell you how NEW I am.

As for saying "If I helped you out a bit more" there is some Irony in that, because I basically told you what your missing, without telling you.

I am not trying to be mean, but more or less Obvious about the whole process.

Botting is something hackers/ advanced people do. I am not saying you cant. But dont expect hand holding, People are going to expect that you at least TRY to make it work.

Now, Assuming you have tried, you should have at least the single most common thing that people are including in there posts. (I think thats the third time I drop this hint now)

While this bot is a EXE, it is basically a compiled macro that you should be able to hack yourself.

Again, I am not saying you CANT do it, or you shouldnt, but something you need to consider because ultimatly you might need to tweek the code yourself.

now, I am having the same problem you are. I am going to make a post for help. at the very least your should look a bit like mine.

[thorsanvil]

Ok, so here goes:

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:31 GB,free:28 GB, used:11 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Custom

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1032x793

On Target Time=50
Missile Delay=333
Timer Skew =+500
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=4
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0


I seem to be having the same problem as a few others, it seems to be missing the Start of the mission.

I AM able quite succesffully to run the macro with the crew skills for hours, but I cant seem to make it out of the gate with this toon.

- He is a Power Tech, DS-Mantis is checked.
- I can Calibrate every once and a while, but I have no idea why it works sometimes, and other times it doesnt.

the error I get is "Scanning for mission start image" even after a successful calibrate.

what image is it looking for?

also, sometimes i have to turn on HD mode, other times I have to turnit off.

[thorsanvil]

Ok, so here goes:

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:31 GB,free:28 GB, used:11 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Custom

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1032x793

On Target Time=50
Missile Delay=333
Timer Skew =+500
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=4
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0


I seem to be having the same problem as a few others, it seems to be missing the Start of the mission.

I AM able quite succesffully to run the macro with the crew skills for hours, but I cant seem to make it out of the gate with this toon.

- He is a Power Tech, DS-Mantis is checked.
- I can Calibrate every once and a while, but I have no idea why it works sometimes, and other times it doesnt.

the error I get is "Scanning for mission start image" even after a successful calibrate.

what image is it looking for?

also, sometimes i have to turn on HD mode, other times I have to turnit off.

from time to time, it finds the mission start time and seems to like to shoot at the top of the screen. but ignores shooting at stuff other then stars at the top.

I find, if I pushthe down arrow button and it drifts down to the lower part of the screen and shots at Everything. but slowl makes it way back up to the top of the screen.

is there anything that might be causing the ship to drift?