[Open Source] Lucky's Spacebot

[vapor311]

yes only adjusting img tolerance for start time. Outside of that adjusting bonus path and lil other, both Bh and trooper work. My trooper is loving Drexel and kalee. While my Bh is currently on asc bar as I type. I will run it through each mission to reconfirm but all passed.

Its funny, Even when my BH fails on them I dont care, its absorbing free pure XP from the kills it gets which means FREE lvling to me lol

[Breathofthedying]

Its funny, Even when my BH fails on them I dont care, its absorbing free pure XP from the kills it gets which means FREE lvling to me lol

1/5 or what ever on the scoreboard is a big WIN. and I love FREE.

[Ainew]

This is because you haven't adjusted the image tolerance... go to options and You will see it marked as Img tolerance. You can bump this all the way up to 125. Once you get that set you will see that 5.35 is far superior and better support.

Yeah I did that right after I posted that its working fine now.

[Cystacae]

Hmm, the img tolerance as described in readme wont help much in this case, any mission with yellow ships will fail for BH. Tolerance is only for timer sync and has no effect on targeting. My BH just got ship, so will see what can be done when there is a bit more time.

Did you guys add a secondary and tertiary target check system? Perhaps that maybe the assistance it needed?

[Cystacae]

Yeah I did that right after I posted that its working fine now.

Good, glad it works for you now.

[Cystacae]

This is really why I would like to see an individual tolerance setting for each mission. If we have the ability to do this it would make doing the dailies all as one very easy. Next to each daily set its own tolerance level and let them go. Those who have been using this long enough pretty much know their tolerances for each mission, I know my kalee is 105, my impossible is 91, my drexel is 94 etc. If we could set an indv. setting to each mission this could run dailies everyday all at once without fail.

This probably won't be in 5.35 unless one of the coders get ambition...

[phagotron]

Did you guys add a secondary and tertiary target check system? Perhaps that maybe the assistance it needed?

Secondary attacks are in use since May, tertiary attacks have been on testbed too that time, turned out to be ineffective.

[Cystacae]

Secondary attacks are in use since May, tertiary attacks have been on testbed too that time, turned out to be ineffective.

I know it is an inherit flaw of pixelsearch but is there ANY way we can circumvent the problem and get it to work for all classes?

[phagotron]

I know it is an inherit flaw of pixelsearch but is there ANY way we can circumvent the problem and get it to work for all classes?

Its more a friendly fire issue than a piselsearch flaw. Atm the best approach might be the hunt for the perfect pixel. Awful task, taking time and will need a real good eye.

[smrtstn]

For som e reason I just cant get this to work except for Jabiim escort. I''m trying to do sarapim and Ive tried setting my tolerance from 80 all the way to 125 and it still just exits out of the mission. Does the same on all missions except for Jabiim actually lol. Not sure what I'm doing wrong here.

Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:12 GB, used:24 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=120
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Sarapin Assault
Win / Loss 0 / 1

Any help would be appreciated.

[phagotron]

For som e reason I just cant get this to work except for Jabiim escort. I''m trying to do sarapim and Ive tried setting my tolerance from 80 all the way to 125 and it still just exits out of the mission. Does the same on all missions except for Jabiim actually lol. Not sure what I'm doing wrong here.

Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:12 GB, used:24 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=120
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Sarapin Assault
Win / Loss 0 / 1

Any help would be appreciated.

Strange indeed. You might better set HD mode on, but that wont solve the problem. I'd say its antialiasing, mayve some kind of HD antialias from your GPU. Double check your TOR graphic and Interface settings, even if all seems to be ok. If there is nothing to be found, take a screenshot from Sarapin at 4:40, cut out the timer at top right and post it here, maybe we can say more then.

[smrtstn]

yes AA is definitely off. Double and triple checked lol. Also turned HD back on. Didn't know If it would make a difference or not having it on since my monitor isnt running in HD atm.

Heres a SS with the before sysinfo except HD is back on.

[Cystacae]

Strange indeed. You might better set HD mode on, but that wont solve the problem. I'd say its antialiasing, mayve some kind of HD antialias from your GPU. Double check your TOR graphic and Interface settings, even if all seems to be ok. If there is nothing to be found, take a screenshot from Sarapin at 4:40, cut out the timer at top right and post it here, maybe we can say more then.

They didn't state whether they are on Very Low graphics setting either. But judging by those screenshots you must be either low or very low.

[Breathofthedying]

40-44 R186 Trooper Results

trooper from my desktop

Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:23 GB,free:19 GB, used:16 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=80
HD Status=0
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Drexel Sweep
Win / Loss 3 / 0


Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:23 GB,free:19 GB, used:17 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=94
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Hydian Way Blockade
Win / Loss 1 / 0





Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:23 GB,free:19 GB, used:17 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=103
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Kalee Fortification
Win / Loss 1 / 0
Luckys Spacebot v5.35 (R186)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:23 GB,free:19 GB, used:17 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=94
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Zosha Advance
Win / Loss 2 / 0




Ill DownGrade gear and Run Bh 15-48 later

[smrtstn]

They didn't state whether they are on Very Low graphics setting either. But judging by those screenshots you must be either low or very low.

That was just on low, I have also tried very low. I''ve spent around 4 hours trying various settings and just at a loss now.
I know the darn thing works, I'm just missing something somewhere, and cant figure it out.