Autoprofessionbot V1.0 - release

[weedyweedpacker]

Great work Dragon.
I am running the new version for an hour and a half now..
The memory leakage has been decreased to almost nothing.
So it does seem that the amount of RAM used does increase with every click.
The CPU usage also stays much lower.

So if we are not getting disconnected after a while, it should be fine.
If you run multiple slots, the refresh will take place once a job is finished.
A disconnect seems unlikely.

[Dragonef22]

Great work Dragon.
I am running the new version for an hour and a half now..
The memory leakage has been decreased to almost nothing.
So it does seem that the amount of RAM used does increase with every click.
The CPU usage also stays much lower.

So if we are not getting disconnected after a while, it should be fine.
If you run multiple slots, the refresh will take place once a job is finished.
A disconnect seems unlikely.

All right, sounds good

Need more feedbacks on the newest version, hope you guys have similair experiences as weedyweedpacker

[valefort]

With the newest version the "multi instances open"-bug should be fixed

that problem seems to be fixed, the memory leak no...the memory usage just raise over time

[flipsensazn]

I am just starting 1.23 and cant get it to start. I have everything configured properly as per the guide in the first page. When i click start, it goes to this section:

https://i.imgur.com/zyooDc5.jpg

And after 15-30 seconds, it times out:

https://i.imgur.com/fP6p8KH.jpg

I can, however, manually select the slot and can pick the profession and stuff.. What coudl be wrong?

[Methuselas]

12:59:38 PM : Bot loaded
1:00:18 PM : Bot was started
1:00:19 PM : User is logged in, mainloop begins
1:07:31 PM : Getting reward of slot 2
1:07:32 PM : Starting slot 2
1:07:54 PM : Slot 2 was started
1:52:07 PM : Bot was interrupted
1:52:23 PM : Bot was started
1:52:24 PM : User is logged in, mainloop begins
1:52:26 PM : Starting slot 2
1:52:29 PM : Slot 2 was started
2:12:30 PM : Getting reward of slot 2
2:12:30 PM : Starting slot 2
2:12:33 PM : Slot 2 was started
2:12:34 PM : Starting slot 2
2:32:35 PM : Getting reward of slot 2
2:32:35 PM : Starting slot 2
2:32:38 PM : Starting slot 2
2:32:41 PM : Slot 2 was started
2:52:44 PM : Getting reward of slot 2
2:52:44 PM : Starting slot 2
2:52:49 PM : Slot 2 was started
2:52:49 PM : Starting slot 2
3:12:50 PM : Getting reward of slot 2
3:12:50 PM : Starting slot 2
3:12:53 PM : Starting slot 2
3:12:56 PM : Slot 2 was started
3:33:01 PM : Getting reward of slot 2
3:33:01 PM : Starting slot 2
3:33:05 PM : Slot 2 was started
3:33:05 PM : Starting slot 2
3:53:07 PM : Getting reward of slot 2
3:53:08 PM : Starting slot 2
3:53:11 PM : Starting slot 2
3:53:14 PM : Slot 2 was started
4:13:19 PM : Getting reward of slot 2
4:13:19 PM : Starting slot 2
4:13:23 PM : Slot 2 was started
4:13:23 PM : Starting slot 2

2:12:42 PM : Slot 2 failed to start:
one of the required assets could not be found
2:32:38 PM : Slot 2 failed to start:
one of the required assets could not be found
2:52:59 PM : Slot 2 failed to start:
one of the required assets could not be found
3:12:53 PM : Slot 2 failed to start:
one of the required assets could not be found
3:33:13 PM : Slot 2 failed to start:
one of the required assets could not be found
3:53:11 PM : Slot 2 failed to start:
one of the required assets could not be found
4:13:32 PM : Slot 2 failed to start:
one of the required assets could not be found

Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction 432135145189808579
Starting the task
Waiting for result of jobstart
Start Job 1
Going to a new task
Found 1 required slots
Found 0 optional slots
Result of fillslotfunction


This was only using 1 slot (the other three are doing Professional training.) I was just gathering mithral ore. Any ideas? It was failing ever 20 minutes, but was still working after a time, apparently. I just noticed, 'cos the gateway timed out.

Also, I just checked my mem status for APB was around 83-100k. It was jumping around, between the two.

[Dragonef22]

that problem seems to be fixed, the memory leak no...the memory usage just raise over time

Do you see a difference between this and the last version in terms of memory usage?

I am just starting 1.23 and cant get it to start. I have everything configured properly as per the guide in the first page. When i click start, it goes to this section:

https://i.imgur.com/zyooDc5.jpg

And after 15-30 seconds, it times out:

https://i.imgur.com/fP6p8KH.jpg

I can, however, manually select the slot and can pick the profession and stuff.. What coudl be wrong?

post the detailed log please

restart it and test it again

can hardly say what went wrong at a timeout

[ocnwo]

Dragonef22 - nice work.
I run the program on a spare laptop and even running 1 instance or 1.2.0, 1.2.1 for a short while, my laptop CPU/GPU would heat up so much the fans would kick into high speed.

Running 3 or 4 instances would overheat enough that the laptop would shut down for safety.

Been running 1.2.3 now for over an hour and the fan has not turned on once.

Very nice.

Also I love the ability to "interrupt", then change task settings, save settings, and restart without having to log in again.

Thanks much!

[valefort]

this one seems to raise a bit slower if i'm not incorrect, but after sometimes it reach the same amount of memory of the other

[Dragonef22]

Dragonef22 - nice work.
I run the program on a spare laptop and even running 1 instance or 1.2.0, 1.2.1 for a short while, my laptop CPU/GPU would heat up so much the fans would kick into high speed.

Running 3 or 4 instances would overheat enough that the laptop would shut down for safety.

Been running 1.2.3 now for over an hour and the fan has not turned on once.

Very nice.

Also I love the ability to "interrupt", then change task settings, save settings, and restart without having to log in again.

Thanks much!

you´re welcome

this one seems to raise a bit slower if i'm not incorrect, but after sometimes it reach the same amount of memory of the other

How long did u let the 1.2.3 version run and how high was your memory usage?

This was only using 1 slot (the other three are doing Professional training.) I was just gathering mithral ore. Any ideas? It was failing ever 20 minutes, but was still working after a time, apparently. I just noticed, 'cos the gateway timed out.

Also, I just checked my mem status for APB was around 83-100k. It was jumping around, between the two.

I am not sure about this bug, will recheck my fillslotfunction in the next days and test more

83-100k sounds fine after this time.

Thinking about adding a timeout-detection, that should be useful

----

Actually the bug might happen because the function pretty much works like that

1. slot is open -) true -) worker exists -) true -) return workerid

and then it will select this id and instantly press start

I guess that the gateway does not react fast enough, therefore the worker won´t be selected when the the bot presses start job

Bah

I will add delays in the next version

[flipsensazn]

Do you see a difference between this and the last version in terms of memory usage?



post the detailed log please

restart it and test it again

can hardly say what went wrong at a timeout

Found the problem. I had the character@account wrong. I used my login account name instead of the other account name. Once I corrected this it started working. Thanks!

[Dragonef22]

Found the problem. I had the character@account wrong. I used my login account name instead of the other account name. Once I corrected this it started working. Thanks!

all right, enjoy

[flipsensazn]

Quick question - How do you un-hide the window?

[valefort]

3 hours and 20 minutes, and now seems it just randomly increase between 450 mb and 560 mb of ram

[weedyweedpacker]

currently running 3 hours and memory is still at 66-70mb.
So it so much better then before.

I will also let it run overnight to see how it will do.

@Valefort, are you sure you are running version 1.2.3?
Or are you doing many slots with all 10 minute timings on them?
In the new version it only seems to increase a little bit on each 'click'.

[flipsensazn]

I clicked the work mode button and it hid the window for the program. I try to hit Strg+W(Ctrl+W i think) and it does not come back. Is the only way to get it back is to close it in the task manager and re-open?