Mooege- The Diablo 3 Emulator - Updated Master Compiles

[Redeem]

Hey guys ... I downloaded the newest moeege version d5b9f83, copied all mpq`s and fortunately now that works.
It says, MooNet-Server is listening on 127.0.0.1:1345 and Game-Server is listening on 127.0.0.1:1999
... I added a new account "!account add test@ anything admin" but it's not working. :confused:
The shortcut properties also ends with " -launch -auroraaddress 127.0.0.1:1345" ...
There was comming the error message: 315300
I also changed the config.ini from BindIP = 0.0.0.0 to BindIP = 127.0.0.1 two times

I hope, someone can help, thanks a lot

Im by no means an expert here yet im sure you dont need to add the test@ account.that should work straight off.(atleats it did for me)
I was able to add accounts with no issue (from mooege ofc not ingame ;/)

Great job so far btw,downloaded the newest build today and most skills are working fine (just a few seem to crash d3) and the monsters are attacking fine however i have two main issues atmo if anyone could assist.
1.Everytime i start any character on any account i enter the game at lvl30.id like to begin from level 1 but not sure how to do this.(i should add the char level is 1 on the selection screen but appers as 30 with no stats in game)
2.I cannot save anything i do.As soon as i leave the game all items etc vanish.i have read a little about saving it to a db or something but no luck so far.

Thanking in advance and keep up the good work

[Hjpel]

Great job so far btw,downloaded the newest build today and most skills are working fine (just a few seem to crash d3) and the monsters are attacking fine however i have two main issues atmo if anyone could assist.
1.Everytime i start any character on any account i enter the game at lvl30.id like to begin from level 1 but not sure how to do this.(i should add the char level is 1 on the selection screen but appers as 30 with no stats in game)
2.I cannot save anything i do.As soon as i leave the game all items etc vanish.i have read a little about saving it to a db or something but no luck so far.

I have the same problems and i cannot open door, date.

[Shockzz45]

Diablo 3 Emulation server problem - YouTube please comment on video to help

---------- Post added at 05:57 PM ---------- Previous post was at 05:07 PM ----------

Anyone who is very skilled with this diablo 3 emulator please add me on skype my skype name is Angytangy45 and please give me some help ive been getting a couple errors.

[eluzai777]

New Update Release mooege-a97198f

Cyclone Strike added(No Rune attributes yet)

[opengraybox]

thx a lot ! working like charm

[Grzen1o]

Hi all, I'm having trouble with mooege so I'm asking for help, so i downloaded the game , downloaded main mooege from wiki, then build solution with VS2010, then copied new Release and putted MPQs in place, when I started at first mooege.exe, I've had some Fatal Problem, so I've downloaded all MPQs, from wiki (uncorrupted), and now im getting even bigger Fatal error, here it is so maybe you guys can figure it out.

[09.01.2012 09:32:23.942] [ Info] [Program]: mooege v1.8101.4391.828 warming-up..
[09.01.2012 09:32:23.989] [ Info] [MPQStorage]: Initializing MPQ storage..
[09.01.2012 09:32:24.973] [Trace] [MPQPatchChain]: Added base-mpq file: CoreData.mpq.
[09.01.2012 09:32:24.973] [Trace] [MPQPatchChain]: Added base-mpq file: ClientData.mpq.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7170.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7200.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7318.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7338.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7447.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7728.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7841.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7931.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-8059.MPQ.
[09.01.2012 09:32:25.348] [Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-8101.MPQ.
[09.01.2012 09:32:25.614] [Trace] [MPQPatchChain]: Applying file: d3-update-base-8101.MPQ.
[09.01.2012 09:32:25.879] [Trace] [MPQPatchChain]: Applying file: d3-update-base-8059.MPQ.
[09.01.2012 09:32:25.973] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7931.MPQ.
[09.01.2012 09:32:26.364] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7841.MPQ.
[09.01.2012 09:32:26.739] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7728.MPQ.
[09.01.2012 09:32:27.145] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7447.MPQ.
[09.01.2012 09:32:27.364] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7338.MPQ.
[09.01.2012 09:32:27.411] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7318.MPQ.
[09.01.2012 09:32:27.723] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7200.MPQ.
[09.01.2012 09:32:27.754] [Trace] [MPQPatchChain]: Applying file: d3-update-base-7170.MPQ.
[09.01.2012 09:32:27.770] [Trace] [MPQPatchChain]: Applying file: ClientData.mpq.
[09.01.2012 09:32:27.942] [Trace] [MPQPatchChain]: Applying file: CoreData.mpq.
[09.01.2012 09:32:28.223] [Trace] [MPQPatchChain]: All files successfully applied.
[09.01.2012 09:32:41.419] [ Info] [MPQPatchChain]: Found a total of 47742 assets from CoreTOC.dat catalog and postponed loading because lazy loading is activated.
[09.01.2012 09:32:42.232] [ Info] [MPQPatchChain]: Found a total of 46166 assets from TOC.dat catalog and postponed loading because lazy loading is activated.
[09.01.2012 09:32:44.716] [ Info] [MPQPatchChain]: Found a total of 335 assets from DB catalog and postponed loading because lazy loading is activated.
[09.01.2012 09:32:46.435] [Fatal] [Program]: Mooege terminating because of unhandled exception. - [Exception] System.TypeInitializationException: Inicjator typów zgłosił wyjątek dla typu 'Mooege.Core.GS.Items.ItemGenerator'. ---> System.Reflection.TargetInvocationException: Obiekt docelowy wywołania zgłosił wyjątek. ---> System.IO.EndOfStreamException: Dokonano próby odczytu poza końcem strumienia.
w CrystalMpq.MpqFileStream.ReadPatchInfoHeader(MpqArchive archive, Int64 offset)
w CrystalMpq.MpqFileStream..ctor(MpqFile file, Stream baseStream)
w Mooege.Common.MPQ.FileFormats.GameBalance..ctor(MpqFile file)
--- Koniec śladu stosu wyjątków wewnętrznych ---
w System.RuntimeMethodHandle._InvokeConstructor(IRuntimeMethodInfo method, Object[] args, SignatureStruct& signature, RuntimeType declaringType)
w System.RuntimeMethodHandle.InvokeConstructor(IRuntimeMethodInfo method, Object[] args, SignatureStruct signature, RuntimeType declaringType)
w System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
w System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
w System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
w Mooege.Common.MPQ.MPQAsset.RunParser()
w Mooege.Common.MPQ.Asset.get_Data()
w Mooege.Core.GS.Items.ItemGenerator.LoadItems()
w Mooege.Core.GS.Items.ItemGenerator..cctor()
--- Koniec śladu stosu wyjątków wewnętrznych ---
w Mooege.Core.GS.Items.ItemGenerator.get_TotalItems()
w Mooege.Program.Main(String[] args)

[opengraybox]

my experience:

post - http://www.ownedcore.com/forums/diab...ml#post2169554 (Mooege- The Diablo 3 Emulator - Updated Master Compiles)

Mooege and MPQ dowload from tread above, Diablo 3 Beta client form bliz - next just creating link to Diablo 3 exe with special link in shortcut. then run server and run diablo 3 - worked with 1st time ! sorry for english ! if you have more question i can try to help you

[Fehu87]

nazdar,

vše mi jede v pohodě, ale až na jedno... jak mám vytvořit account?
byl by někdo ochotnej mi to vysvětlit? díky

---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------

ohh sorry
hi,

me everything goes fine, but only one ... how do I create an account?
would be someone willing to tell me? thanks

[opengraybox]

at login screen in user field write: test@ - at password anything. thats it - then create user with own username

[razidark]

HERE IS FINE, thanks a lot!

[Fehu87]

I do not log in the game, but how to create the acc Mooege's console---

10) Type in Mooege’s console : “!account add [YourLogin]@ [YourPassword] admin”

[opengraybox]

when Mooege server is runing - press on black console screen mouse left button and write in - 10) Type in Mooege’s console : “!account add [YourLogin]@ [YourPassword] admin”

[Fehu87]

so I go Mooege.exe and the server comes up just click into the measuring box and write "Mooege's console:"! account add xxx @ xxx admin "in this shape?

[razidark]

Go to ur Mooege.exe running and type, !account add uracc@ password admin (min 8 characters for password.)
Have FUN!

i wish to play online with someone, PM ME!

[Fehu87]

Unfortunately I have to create the acc or received. You do not know how with this?

_ __ ___ ___ ___ ___ __ _ ___
| '_ ` _ \ / _ \ / _ \ / _ \ / _` | / _ \
| | | | | || (_) || (_) || __/| (_| || __/
|_| |_| |_| \___/ \___/ \___| \__, | \___|
|___/

Copyright (C) 2011 mooege project
mooege comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under certain cond
itions; see the LICENSE file for details.

[ Info] [Program]: mooege v1.8101.4391.828 warming-up..
[ Info] [MPQStorage]: Initializing MPQ storage..
[Trace] [MPQPatchChain]: Added base-mpq file: CoreData.mpq.
[Trace] [MPQPatchChain]: Added base-mpq file: ClientData.mpq.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7170.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7200.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7318.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7338.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7447.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7728.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7841.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-7931.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-8059.MPQ.
[Trace] [MPQPatchChain]: Added patch file: /base/d3-update-base-8101.MPQ.
[Trace] [MPQPatchChain]: Applying file: d3-update-base-8101.MPQ.
[Trace] [MPQPatchChain]: Applying file: d3-update-base-8059.MPQ.
[Trace] [MPQPatchChain]: Applying file: d3-update-base-7931.MPQ.
[Fatal] [Program]: Mooege terminating because of unhandled exception. - [Excepti
on] System.TypeInitializationException: The type initializer for 'Mooege.Common.
MPQ.MPQStorage' threw an exception. ---> System.OverflowException: Arithmetic op
eration resulted in an overflow.
at CrystalMpq.MpqFileStream..ctor(MpqFile file, Stream baseStream)
at CrystalMpq.MpqArchive.ParseListFile()
at CrystalMpq.MpqArchive.OpenInternal(Stream stream, Boolean parseListFile)
at Mooege.Common.MPQ.MPQPatchChain.ConstructChain()
at Mooege.Common.MPQ.MPQPatchChain..ctor(Int32 requiredVersion, IEnumerable`1
baseFiles, String patchPattern)
at Mooege.Common.MPQ.Data..ctor()
at Mooege.Common.MPQ.MPQStorage..cctor()
--- End of inner exception stack trace ---
at Mooege.Common.MPQ.MPQStorage.get_Initialized()
at Mooege.Program.Main(String[] args)