[Goldfarming] Dank Celler Gold and Loot [AutoIT Script] [WIZARD] [1920x1080]

[magda]

Script is awesome but i cant get it to run longer periods
1. Two times i saw it paused at the blacksmith
2. One time it was freezing my VM, the whole screen with D3 process not responding. I heard its a general problem with this version, so i stopped VM for now.
3. Last time i checked D3 was hanging at the loading screen after 157 runs.

Specs: corei7 2600k, 16gb, kingston hyperx 3k ssd, fast cable i-net

[jcunit]

What are the times you guys see in the debug log for analyzing/vendoring/salvaging.

Vmware
For analyzing loot:
18:23 - 22:57 : Analyzing took about 30 seconds.
23:08 - 07:21 : Analyzing takes 40+ seconds.

So after about 4,5 hours my Vmware really slowed down, no clue why.

For Vendoring/salvaging:
The combined time is usual around 30-33 seconds. I vendor all yellows 61 and lower and I salvage blues 61 and up and vendor the rest.

Please post your times so I can figure out if salvaging/vendoring/analyzing is slow so I have to adjust some stuf in my vmware.


On Computer
This was after my vmware run was done, testing was alot shorter but times seemed very consistent.

Analyzing was still slow, at 40+ seconds.
So I guess my whole computer slowed down after a that first 4,5 hours.

Salvaging + Vendorring seemed faster on my computer, instead of 30 seconds total would get about 22 seconds.

[farkedup]

What are the times you guys see in the debug log for analyzing/vendoring/salvaging.

Vmware
For analyzing loot:
18:23 - 22:57 : Analyzing took about 30 seconds.
23:08 - 07:21 : Analyzing takes 40+ seconds.

So after about 4,5 hours my Vmware really slowed down, no clue why.

For Vendoring/salvaging:
The combined time is usual around 30-33 seconds. I vendor all yellows 61 and lower and I salvage blues 61 and up and vendor the rest.

Please post your times so I can figure out if salvaging/vendoring/analyzing is slow so I have to adjust some stuf in my vmware.


On Computer
This was after my vmware run was done, testing was alot shorter but times seemed very consistent.

Analyzing was still slow, at 40+ seconds.
So I guess my whole computer slowed down after a that first 4,5 hours.

Salvaging + Vendorring seemed faster on my computer, instead of 30 seconds total would get about 22 seconds.

whats the amount of RAM and CPU cores you're using in the vm? also which VM software?

[jcunit]

Using Vmware, workstation.

Was running on 3 gig ram, 2 processors. I have an intel i5 @ 3ghz.

[BigLootz]

what has wormhole timing to do with missed cellars?:>

The icon in the minimap is used to check for cellar spawn.. on some systems, network ;latency and/or graphic card speed causes this icon to pop up more slowly after you finishing teleporting.

The wormhole timing set longer allows more time for the icon to pop up

[chancity]

Using Vmware, workstation.

Was running on 3 gig ram, 2 processors. I have an intel i5 @ 3ghz.

Imagesearch is slowing you down..increasing your cpus should fix it

Sent from my DROID RAZR using Tapatalk 2

[jcunit]

Imagesearch is slowing you down..increasing your cpus should fix it

Sent from my DROID RAZR using Tapatalk 2

You mean the analyzing or the vendoring/salvaging? It seems very weird to me that salvaging/vendoring is faster outside of a VM, but analyzing is just as fast.
I have a standard i5 and have never overcocked anything, not sure if I wanna try overclocking it tbh.

What times are you/others getting?

[AlanLembu]

You mean the analyzing or the vendoring/salvaging? It seems very weird to me that salvaging/vendoring is faster outside of a VM, but analyzing is just as fast.
I have a standard i5 and have never overcocked anything, not sure if I wanna try overclocking it tbh.

What times are you/others getting?

22 second open 10-11 sec closed

i'm running with a constant 300ms so my load time is around 4400

[XinShen]

Just wanted to say good job for an amazing bot. I recently started using it and for the latest version, I was wondering how the stash/vendor/salvage function worked. For example, if I wanted to stash all ilvl 61+ rares, salvage all ilvl 61+ magics, vendor the rest, what would be the anal loot settings?

[Anal Loot]
Stash Rare=61
Salvage Rare=64
Vendor Rare=64
Stash Magic=64
Salvage Magic=63
Vendor Magic=60

?

Thanks.

[jcunit]

22 second open 10-11 sec closed

i'm running with a constant 300ms so my load time is around 4400

Was wondering what times you're getting analysing loot. I'm getting 8,8-8.9 seconds closed and 21s open cellars, those run fine. Just getting fluctuating times at the stashing/vendoring/salvaging/analysing.

[farkedup]

Using Vmware, workstation.

Was running on 3 gig ram, 2 processors. I have an intel i5 @ 3ghz.

This is actually 1 core + 1 hyperthreading core most likely. I'm not sure why its faster at FIRST and then slows down over time. I have an I5-660 in mine right this second and haven't been running on VM. I had an I7-860 in there but put the 660 in to conserve power/heat but when I level up my second account I guess I better put the I7 back in. I was about to sell the I7 but I better hang onto it! Hardware forums like hardforum.com and the anandtech.com forum along with toms hardware are some great places to scoop up used CPU's way cheaper than ebay.

Hopefully I'll get my new account up to 60 and botting in the near future and let you know how VM works for me with the I5 vs the I7.

Are you using the 800x600 or the full sized? i can probably set something up on the I5 today if you let me know your settings through a PM and I'll try to reproduce it and let it run a while. I should be able to determine if just tossing an I7 and giving it more CPU will actually fix it for you before you go buy one.

I also just pulled an Intel 80Gb first gen SSD from a laptop that I'll be installing the VM stuff to since the 80gb OS SSD I have isn't big enough for 2 OS installs + 2 copies of D3. I might be buying a 160gb+ drive in the near future but I wanted to make sure it worked right THIS way before messing with anything else.

[jeehye]

Script is awesome but i cant get it to run longer periods
1. Two times i saw it paused at the blacksmith
2. One time it was freezing my VM, the whole screen with D3 process not responding. I heard its a general problem with this version, so i stopped VM for now.
3. Last time i checked D3 was hanging at the loading screen after 157 runs.

Specs: corei7 2600k, 16gb, kingston hyperx 3k ssd, fast cable i-net

Hey Chancity,

It seems the same thing to me on multiple occasions, mostly after about 1.5- 3 hrs. Occurred again this morning where itll swap out my gear then pause (which is great btw since it knows not to vend my active gear) but is there a way minimize this from happening (happens both at the salvage person and the vendor) ? Aside from that everything runs smooth as butter. It just seems like a gamble when trying to run it for long hours.

Also I have about 17k DPS set with archon and im getting roughly 25s Open, is that about right? im seeing a lot of people getting < 20secs so im curious how much dps you have. i assume more than 20k?

[chancity]

You mean the analyzing or the vendoring/salvaging? It seems very weird to me that salvaging/vendoring is faster outside of a VM, but analyzing is just as fast.
I have a standard i5 and have never overcocked anything, not sure if I wanna try overclocking it tbh.

What times are you/others getting?

The only thing time consuming should be at the stash. Miscitems take the longest, next are set items. Blues and rares take the least amount of time. When its at the blacksmith/merchant the location of the items are in an array tagged with what to do with them. That should be quick.

Sent from my DROID RAZR using Tapatalk 2

[chancity]

Hey Chancity,

It seems the same thing to me on multiple occasions, mostly after about 1.5- 3 hrs. Occurred again this morning where itll swap out my gear then pause (which is great btw since it knows not to vend my active gear) but is there a way minimize this from happening (happens both at the salvage person and the vendor) ? Aside from that everything runs smooth as butter. It just seems like a gamble when trying to run it for long hours.

Also I have about 17k DPS set with archon and im getting roughly 25s Open, is that about right? im seeing a lot of people getting < 20secs so im curious how much dps you have. i assume more than 20k?

Im going to be adding an emailing system that will notify you when something like this happens. Ive had the bot pause because it didn't make it to the blacksmith in time. I cant combat lag but I'll try to add something to prevent pausing when its not needed.

Sent from my DROID RAZR using Tapatalk 2

[farkedup]

The only thing time consuming should be at the stash. Miscitems take the longest, next are set items. Blues and rares take the least amount of time. When its at the blacksmith/merchant the location of the items are in an array tagged with what to do with them. That should be quick.

Sent from my DROID RAZR using Tapatalk 2

so if this gets really bad things like tomes and gems is what becomes a resource hog?

also JC hit ctrl-alt-delete, task manager, performance and look at the number of CPU usage history boxes you have. 2 = 2CPU total 4 would mean 2CPU + 2 CPU HT then some I5's even have 4 actual cores but no HT. If you have 4 boxes you could get away with giving 3 to that VM and leaving 1 for your desktop web browsing and other stuff you're doing.