[Goldfarming] [Witch Doctor] [AutoIT] ACT 1 Cellar Farming Bot

[biskwit]

The d3pref file? Maybe thats the reason why its not working. Well let me try it then.

[dabroman]

I have a huge problem.

OS: Win 7 64bit
Res: 800x600
Script version: 0.4

When i started to use this script everything worked excellent.

But now, the mouse "get out of Diablo 3" and its like the script gets cancelled or something.

I have closed all programs that have any kind of notification system that draw attention from the program ( like chat programs, steam etc )

Any one have any idea? And this happens when the script have taken about 300.000 of gold, like if its a cap or something..

[dekiel123]

"You don't seem to be in the lobby. Did you properly configure the bot? Bot will now exit."

800x600
v0.4

[theasmo]

Hello!

I know you guys probably are busy but I just wanted to tell you that I seem to have a problem with running this bot 800x600 res. When I try to do this the WD first casts a spell (fetish army) and then runs for or five clicks to the west until the opening to the dank cellar is visible. After this the WD fires some splinters to the southwest and then the bot tries to log out of the game. If I increase the char speed I get closer to the dank cellar but still the bot dosen't seem to detect it. I am using a wide screen monitor and it has a maximum res of 1440x900 which is why i need this bot to work. I tried to install everything on vm ware also but then I cannot even start the game, I'm gonna try this once more but vm ware seems too memory and hardware demanding for my current rig (unless someone has some ideas).

I also noticed that the values in d3prefs changes when I run the game from
800
600
800
600
etc.
to something strange like

DisplayModeFlags "0"
DisplayModeWindowMode "1"
DisplayModeWinLeft "115"
DisplayModeWinTop "53"
DisplayModeWinWidth "816"
DisplayModeWinHeight "638"
DisplayModeUIOptWidth "800"
DisplayModeUIOptHeight "600"
DisplayModeWidth "800"
DisplayModeHeight "600"
DisplayModeRefreshRate "75"
DisplayModeBitDepth "32"
or something like that... This could be due to the fact that I am running on a widescreen moitor which forces the game into some widescreen mode even for 800x600

also the instructions seem to contain an extra set of double quotes like this:
"DisplayModeFlags "0"
DisplayModeWindowMode "1"
DisplayModeWinLeft "428"
DisplayModeWinTop "162"
DisplayModeWinWidth "800"
DisplayModeWinHeight "600"
DisplayModeUIOptWidth "800"
DisplayModeUIOptHeight "600"
DisplayModeWidth "800"
DisplayModeHeight "600"
DisplayModeRefreshRate "75"
DisplayModeBitDepth "32""
Don't know if this is intentional (would guess not) or not but it can probably make things a bit harder for people who are just copy-pasting into d3prefs ant then getting errors.

[Gkyckling]

0.7 works perfect. Maybe 250k/hour and REALLY stable.
I would like to level a monk, is there any autoIT script simular to this one that can level?

[heroina]

guys.. sometimes the cellar is open but the bot clicks just a bit right to the door so it loses the run.. any idea how i fix that? how i edit the bot to click just a bit to the left so it gets the cellar 100% of the times it is open??

thx in advance

[playtowin]

Just to be on the safe side why not listen to them instead of accusing theyre lying. Mine is off for the moment thanks for the heads up and sorry about your losts!!!!!!!!!

[stewe89]

guys.. sometimes the cellar is open but the bot clicks just a bit right to the door so it loses the run.. any idea how i fix that? how i edit the bot to click just a bit to the left so it gets the cellar 100% of the times it is open??

thx in advance

wrong resolution or d3prefs. try to change

[alanrl05]

the 800x600 script seem unstable it always crash on me and it deosnt kill sarkoth.. anyone having problems with 800x600? or am i the one having problems?

[stewe89]

the 800x600 script seem unstable it always crash on me and it deosnt kill sarkoth.. anyone having problems with 800x600? or am i the one having problems?

works fine for me

[MasqLB]

v0.4 seems to crash on me after a few runs, so I started messing around with the dev v0.7 version.

I've edited the file with:
$R = 1 (for 800x600), and the picture path (using v0.4 pictures) but it does not work.
I'll try redoing all the images this afternoon. Can you explain an accurate way to discover/map the locations for the data below? I could have it finished by tomorrow.

;800x600
$pngLoc[1] = "F:\Program Files (x86)\Diablo III\pics\800x600\" ; Need people to make those pics
$Resume[1][0] = 174
$Resume[1][1] = 232
$GameLobbyCode[1][0] = 174
$GameLobbyCode[1][1] = 232
$GameLobbyCode[1][2] = 4262400
$GameScreenCode[1][0] = 486
$GameScreenCode[1][1] = 578
$GameScreenCode[1][2] = 0x6C9BFF
; Need people working on the following coordinates
$LostConnectionOkBtn[1][0] = 0
$LostConnectionOkBtn[1][1] = 0
$LostConnectionText0[1][0] = 0
$LostConnectionText0[1][1] = 0
$LostConnectionText0[1][2] = 0
$LostConnectionText0[1][3] = 0
$LostConnectionText1[1][0] = 0
$LostConnectionText1[1][1] = 0
$LostConnectionText1[1][2] = 0
$LostConnectionText1[1][3] = 0
$LostConnectionText2[1][0] = 0
$LostConnectionText2[1][1] = 0
$LostConnectionText2[1][2] = 0
$LostConnectionText2[1][3] = 0
$ResumeBtnCoord[1][0] = 0
$ResumeBtnCoord[1][1] = 0
$ResumeBtnCoord[1][2] = 0
$ResumeBtnCoord[1][3] = 0
$CharLoc[1][0] = 0
$CharLoc[1][0] = 0
$CastLoc[1][0] = 0
$CastLoc[1][1] = 0
$SellCoords[1][0] = 0
$SellCoords[1][1] = 0
$SlotOffset[1] = 0
$ItemStartCoord0[1][0] = 0
$ItemStartCoord0[1][1] = 0
$ItemStartCoord0[1][2] = 0
$ItemStartCoord0[1][3] = 0
$ItemStartCoord1[1][0] = 0
$ItemStartCoord1[1][1] = 0
$ItemStartCoord1[1][2] = 0
$ItemStartCoord1[1][3] = 0
$BagFullCoords[1][0] = 0
$BagFullCoords[1][1] = 0
$BagFullCoords[1][2] = 0
$BagFullCoords[1][3] = 0
$IdleCursorCoords[1][0] = 0
$IdleCursorCoords[1][1] = 0
$IdleCursorCoords[1][0] = 0
$IdleCursorCoords[1][1] = 0
$TristramTextCoord[1][0] = 0
$TristramTextCoord[1][1] = 0
$TristramTextCoord[1][2] = 0
$TristramTextCoord[1][3] = 0
$RuinTextCoord[1][0] = 0
$RuinTextCoord[1][1] = 0
$RuinTextCoord[1][2] = 0
$RuinTextCoord[1][3] = 0
$CellarTextCoord[1][0] = 0
$CellarTextCoord[1][1] = 0
$CellarTextCoord[1][2] = 0
$CellarTextCoord[1][3] = 0
$DeathBounds[1][0] = 0
$DeathBounds[1][1] = 0
$DeathBounds[1][2] = 0
$DeathBounds[1][3] = 0
$OkBtn0[1][0] = 400
$OkBtn0[1][1] = 352
$PwdInput[1][0] = 318
$PwdInput[1][1] = 390
$OkBtn1[1][0] = 401
$OkBtn1[1][1] = 474
$LoginFailText[1][0] = 0
$LoginFailText[1][1] = 0
$LoginFailText[1][2] = 0
$LoginFailText[1][3] = 0
$LeaveGameText[1][0] = 0
$LeaveGameText[1][1] = 0
$LeaveGameText[1][2] = 0
$LeaveGameText[1][3] = 0

[liquidsystem]

v0.4 seems to crash on me after a few runs, so I started messing around with the dev v0.7 version.

I've edited the file with:
$R = 1 (for 800x600), and the picture path (using v0.4 pictures) but it does not work.
I'll try redoing all the images this afternoon. Can you explain an accurate way to discover/map the locations for the data below? I could have it finished by tomorrow.

;800x600
$pngLoc[1] = "F:\Program Files (x86)\Diablo III\pics\800x600\" ; Need people to make those pics
$Resume[1][0] = 174
$Resume[1][1] = 232
$GameLobbyCode[1][0] = 174
$GameLobbyCode[1][1] = 232
$GameLobbyCode[1][2] = 4262400
$GameScreenCode[1][0] = 486
$GameScreenCode[1][1] = 578
$GameScreenCode[1][2] = 0x6C9BFF
; Need people working on the following coordinates
$LostConnectionOkBtn[1][0] = 0
$LostConnectionOkBtn[1][1] = 0
$LostConnectionText0[1][0] = 0
$LostConnectionText0[1][1] = 0
$LostConnectionText0[1][2] = 0
$LostConnectionText0[1][3] = 0
$LostConnectionText1[1][0] = 0
$LostConnectionText1[1][1] = 0
$LostConnectionText1[1][2] = 0
$LostConnectionText1[1][3] = 0
$LostConnectionText2[1][0] = 0
$LostConnectionText2[1][1] = 0
$LostConnectionText2[1][2] = 0
$LostConnectionText2[1][3] = 0
$ResumeBtnCoord[1][0] = 0
$ResumeBtnCoord[1][1] = 0
$ResumeBtnCoord[1][2] = 0
$ResumeBtnCoord[1][3] = 0
$CharLoc[1][0] = 0
$CharLoc[1][0] = 0
$CastLoc[1][0] = 0
$CastLoc[1][1] = 0
$SellCoords[1][0] = 0
$SellCoords[1][1] = 0
$SlotOffset[1] = 0
$ItemStartCoord0[1][0] = 0
$ItemStartCoord0[1][1] = 0
$ItemStartCoord0[1][2] = 0
$ItemStartCoord0[1][3] = 0
$ItemStartCoord1[1][0] = 0
$ItemStartCoord1[1][1] = 0
$ItemStartCoord1[1][2] = 0
$ItemStartCoord1[1][3] = 0
$BagFullCoords[1][0] = 0
$BagFullCoords[1][1] = 0
$BagFullCoords[1][2] = 0
$BagFullCoords[1][3] = 0
$IdleCursorCoords[1][0] = 0
$IdleCursorCoords[1][1] = 0
$IdleCursorCoords[1][0] = 0
$IdleCursorCoords[1][1] = 0
$TristramTextCoord[1][0] = 0
$TristramTextCoord[1][1] = 0
$TristramTextCoord[1][2] = 0
$TristramTextCoord[1][3] = 0
$RuinTextCoord[1][0] = 0
$RuinTextCoord[1][1] = 0
$RuinTextCoord[1][2] = 0
$RuinTextCoord[1][3] = 0
$CellarTextCoord[1][0] = 0
$CellarTextCoord[1][1] = 0
$CellarTextCoord[1][2] = 0
$CellarTextCoord[1][3] = 0
$DeathBounds[1][0] = 0
$DeathBounds[1][1] = 0
$DeathBounds[1][2] = 0
$DeathBounds[1][3] = 0
$OkBtn0[1][0] = 400
$OkBtn0[1][1] = 352
$PwdInput[1][0] = 318
$PwdInput[1][1] = 390
$OkBtn1[1][0] = 401
$OkBtn1[1][1] = 474
$LoginFailText[1][0] = 0
$LoginFailText[1][1] = 0
$LoginFailText[1][2] = 0
$LoginFailText[1][3] = 0
$LeaveGameText[1][0] = 0
$LeaveGameText[1][1] = 0
$LeaveGameText[1][2] = 0
$LeaveGameText[1][3] = 0

Oh, sorry... I haven't showed anyone the Coordinates for it. Want me to give you it? I'll PM you the .txt file.

EDIT: v0.4 doesn't use pictures.... What are you talking about....?

[bennycws]

hi i need help my scree resoultion is 1280 x 1024 , and i try 800 x 600 but it wont go in to the Cellar pls help me ty and my D3pref DisplayModeFlags "0"
DisplayModeWindowMode "2"
DisplayModeWinLeft "0"
DisplayModeWinTop "0"
DisplayModeWinWidth "800"
DisplayModeWinHeight "600"
DisplayModeUIOptWidth "800"
DisplayModeUIOptHeight "600"
DisplayModeWidth "800"
DisplayModeHeight "600"
DisplayModeRefreshRate "75"
DisplayModeBitDepth "32"

[bennycws]

Hi i need help i set my screen resoultion to 800x600 ,sometimes the cellar is open but the bot clicks just a bit right to the door and wont click to the cellar door Can anyone help

MY D3prefs

DisplayModeWindowMode "2"
DisplayModeWinLeft "0"
DisplayModeWinTop "0"
DisplayModeWinWidth "800"
DisplayModeWinHeight "600"
DisplayModeUIOptWidth "800"
DisplayModeUIOptHeight "600"
DisplayModeWidth "800"
DisplayModeHeight "600"
DisplayModeRefreshRate "75"
DisplayModeBitDepth "32"

[bennycws]

HI I HAVE TRY THE 800 x 600 for WD BUT NOT WORKING THE BOT CLICK ALWAY CLICK A BIT RIGHT TO THE cELLAR DOOR AND ANYONE HELP
THANJKS