Best ghom bot!

[burgaud]

@burguad I failed to mention the bot is also standing on top of the loot. I think that is within loot range, but the bot didn't know that it had indeed killed Ghom and logs out instead? Not sure if that has happened to you as well.

You are using crusader right?
What skills does it use? Hammers? No DoT?
What is your buttonleftrightimes value?
When Ghom dies, what is the counter left? Make it such that, when Ghom dies, the counter has at least 3 left. Also, check if you follow this instruction:
Stashing, selling and salvaging.jpg (sorry, I could not upload the image itself, just check the image inside your ghombot folders)

I have these values which loots just about everything that drops except whites. Do you have it to "1"?
[LootType]
sets=1
Legendary=1
Yellow=1
Blue=1
Gems=1

[burgaud]

I tried botting Crusader (to find out hjcn's problem) and here is what I find:

* Law of Valor (for speed and Crit)
* Phalanx Bowmen (for DPS)
* Heaven's Fury (for DPS)
* Bombardment (for DPS)
* Justice Hammer (Main DPS)
* Blessed Hammer (Main DPS)

1. Unlike DH, many of the skills above such s Phalanx and Heaven's Fury have shorter Cooldown so much so these skills are available and the fight is still not done. I checked the config if there are something I could modify to improve, I find none:

[Crusaderspec]
buttonleftrightimescrus=30
rightclicktimercrus=150
leftclicktimercrus=150

Is it possible that instead of just the above setting, it would be better if we can fully customize the bot with all skills available? ie

[Crusaderspec]
FightTimer=30000
SkillRTimer=250
SkillLTimer=250
Skill1Timer=45000
Skill2Timer=15000
Skill3Timer=20000
Skill4Timer=60000

;all timer in milliseconds
Once Bot is in position, it will immediately spam the skills and each skills have corresponding cooldown such that, once cooldown is up, it will re-spam it again.
Currently, I am seeing it only doing all the skills 1-4 only once.

[hjcn]

You are using crusader right?
What skills does it use? Hammers? No DoT?
What is your buttonleftrightimes value?
When Ghom dies, what is the counter left? Make it such that, when Ghom dies, the counter has at least 3 left. Also, check if you follow this instruction:
Stashing, selling and salvaging.jpg (sorry, I could not upload the image itself, just check the image inside your ghombot folders)

I have these values which loots just about everything that drops except whites. Do you have it to "1"?
[LootType]
sets=1
Legendary=1
Yellow=1
Blue=1
Gems=1

I am using a crusader, using hammers, no DoT.
I've also tried it with other spells for Left/right click, with varying kill times. I'm not really having an issue with killing the boss. Moreso what happens after.
Have tried to use both the crusader and the demon hunter settings but it doesn't make a difference.

[DEmonspec]
buttonleftrightimes=58
rightclicktimerdh=300
leftclicktimerdh=150

[Crusaderspec]
buttonleftrightimescrus=10
rightclicktimercrus=1500
leftclicktimercrus=1200

On the demonhunter the counter left is around 5, the crusader I've tested from 3-10. In all cases the boss dies with reasonable time left on the timer.

My settings are the same as in the instructions, but the bot doesn't make it to town after killing, just leaves the game. Loot type settings are identical to yours.

The last thing it does before attempting to leave the game is to toggle item display on ground. Any ideas?
How does the bot determine whether or not Ghom is actually dead at the end of combat and whether to start looting or log out?

[burgaud]

I do not have the actual "raw" AU3 files to determine how they check for Boss Health.

Perhaps, the script checks for health boss using Image Comparison; if you will check your ghomBot files, there is a a file called bosshealthbar.png. And if you open it, it is red which looks like the health bar on the game. Not really sure.

I believe yuo have this problem: pushtoshowitems
I have it OFF, but the game is set to display all loots on the floor. So maybe, that is your situation. You do not have it displaying on the ground and it is not finding them.
OR you have it displayed on the ground, but Bot undisplay it with pushtoshowitems=1.


[Settings]
Statustip=1
teletotownbeforelogingout=1
Printscreen=
loadingtimer=15000
pushtoshowitems=
teleporttimer=5600
loggingoff10sectimer=12500
deletelogfilewhenrerunbot=
resumeButtoncolor=0x400900
swaptabifcurrenttabfull=
Doyouhave25percentmovement=
timecharacterneedstobeabletomoveafterteleport=800
Timethattakestogetclosetoyellowdoor=750
timeyouneedtogettobossorposition=2300
timeneedtowaituntillrdytogoforboss=750
keybindforcetomove=v
averageandtotaltimerun=1
checkarmor=1

[zetswei]

maybe you can help me? even after doing the pictures multiple times, i end up with it getting stuck in this spot (not quite scrolling down to quests) if I manually enter games it works great though

[burntangel]

Zetswei, by the position of your scroll bar n the quest menu, it looks like you're missing some quest. Count through them, 1 by one, to make sure you have all of them. They're listed in the Everything you need to know folder.

It's either that, or you are maybe using the wrong resolution? If those don't fix it, I really am not sure. :\

[BlooDSki]

i want to make a leap EQ build for my barb so i can do t5+ on ghom, i have it set to where instead of HOTA it uses leap but the leap doesnt target ghom is there anyway i can make it leap on ghom over and over

[zetswei]

Zetswei, by the position of your scroll bar n the quest menu, it looks like you're missing some quest. Count through them, 1 by one, to make sure you have all of them. They're listed in the Everything you need to know folder.

It's either that, or you are maybe using the wrong resolution? If those don't fix it, I really am not sure. :\

Well, I'm in 1080 resolution, I'll look at the other stuff. as far as quests, I walked through every quest until a5 because I wanted to get the legendary and got bored. thanks for the swift reply I'll check other things out. just curious if this was a known thing or I missed something huge

/e yea copied all his stuff and still unable to do it stops in same place. I'mthinking maybe i have too many quests?

[branon]

Well, I'm in 1080 resolution, I'll look at the other stuff. as far as quests, I walked through every quest until a5 because I wanted to get the legendary and got bored. thanks for the swift reply I'll check other things out. just curious if this was a known thing or I missed something huge

/e yea copied all his stuff and still unable to do it stops in same place. I'mthinking maybe i have too many quests?

Do you have any quests in act 1/2 expanded? Try making a game to kill ghom, manually killing then teleporting to town and exiting. Try again then.

EDIT: BTW the main issue that I have with the bot is that it sometimes leaves the game too quickly, which doesnt update the quest to the next one, which causes it to fail to make the next game.

[gassu]

Hi!
Overall great bot, but still having some issues.
1. same like burgaud's, Sometimes, after killing ghom and going back to the menu page, the Quest List
is not updated and The Breached Keep is highlighted. This prevents bot from
continuing because it requires that the next quest be highlighted. I guess it happens when bot quits too fast after killing ghome, maybe just add some delay for leaving game after teleport.

2. in v1.2 bug was fixed - Fixed a bug when for some reason didnt ride off bank window and didnt not move to
sell or salvage and it would stash every single yellow and blue from bags - but for me it appears that was not.
When I choose "salvage=1" it stucks near the stash and then just go ahead with full inventory, and so on.
When I choose "sell=1" it just "sells" all items into stash, which is not good because stash will be filled very quickly, and then he'll probably stuck.
Only option that will work is never sell never salvage never stash, and pick up only leg/set but then you losing either gold or materials.

3. If you select to pick up only set/leg items, bot often does not pick up gold after killing ghome, when there are only yellow and blue items. Sometimes he steps forward
and picks up gold, then teleporting to town, but usually he just portals right after killing. This is also spot when you losing gold.

[burntangel]

Do you have any quests in act 1/2 expanded? Try making a game to kill ghom, manually killing then teleporting to town and exiting. Try again then.

EDIT: BTW the main issue that I have with the bot is that it sometimes leaves the game too quickly, which doesnt update the quest to the next one, which causes it to fail to make the next game.

I thought this way at first as well, but regardless of which quest it is on or which step in the chain he is on, he will select the right quest if the png files are right. Once I got my Ghomquest.png fixed, he could leave early, late, die, anything that causes him to miss the checkpoint for quest 4, and he will still enter the game correctly. When he freezes on that screen, try print screening from there and making the png file by pasting that screen into a new png file and saving it as the Ghomquest.png. That's how I eventually got mine working. Richard explained it to me like this: It wouldn't make sense to have a bot that froze up under these random circumstances every 20-30 minutes. The bot is made to continue on regardless.

[branon]

I thought this way at first as well, but regardless of which quest it is on or which step in the chain he is on, he will select the right quest if the png files are right. Once I got my Ghomquest.png fixed, he could leave early, late, die, anything that causes him to miss the checkpoint for quest 4, and he will still enter the game correctly. When he freezes on that screen, try print screening from there and making the png file by pasting that screen into a new png file and saving it as the Ghomquest.png. That's how I eventually got mine working. Richard explained it to me like this: It wouldn't make sense to have a bot that froze up under these random circumstances every 20-30 minutes. The bot is made to continue on regardless.

For him if he has quests expanded that have too many steps then it wont ever get to the point of what the imagesearch would find for the pngs since it never sees the quest in the first place.

For me, I don't know why it would work fine normally (I made the pngs myself exactly as described) but not when it leaves early.

[SnowChild]

There's 1 thing i really don't understand, why does the bot run for a few runs and then it gets stuck in quest selection for you guys ... I am using the included pngs files from ricardo and had no problem even when dying or lagging or whatever the bot will always find the quest ...

Are you guys running windows 32bit ?
Are you using the same graphics-settings as shown in the 'What you need to know' folder ?
Are you in windowed fullscreen and not fullscreen ?

[Woink]

There's 1 thing i really don't understand, why does the bot run for a few runs and then it gets stuck in quest selection for you guys ... I am using the included pngs files from ricardo and had no problem even when dying or lagging or whatever the bot will always find the quest ...

Are you guys running windows 32bit ?
Are you using the same graphics-settings as shown in the 'What you need to know' folder ?
Are you in windowed fullscreen and not fullscreen ?

Where are the included .png files located? :O
Pretty sure tho it has nothing to do with the png files.

[Woink]

I do not think this is a PNG file error.
To Wit: if it is, then you wont be able to run 30-40 games.

I believe the problem is that, either due to lag, or death, or perhaps a server glitch, when the game goes to "Menu Selection", the quest log ramains that you are still doing "The Breached Keep" quest and thus, the bot does not know how to proceed because it firstly requires that the game is already in the "Tremors in the Stone" quest.

There is no solution to this problem unfortunately. It is hard coded into the bot to first check "The Breached Keep" quest is dark, then and only then will it pick "The Breached Keep" quest from the list and select "Kill Ghom" subquest.

Can you please verify, confirm your case, by taking a screen shot of the Quest List when your error is occuring?

As requested, here is a screen of when it got stuck this morning.