[ArcEmu] Can`t connect my server after publicing it

**Alkamor** · 04-08-2010

Hello. I need some help to get my server online without hamachi. I did everyting it said in this video [ame="http://www.youtube.com/watch?v=Ba5LMubv_tY"]YouTube- WoW Server Public without Hamachi [EASY] [No-IP][/ame]
but when i connect my server ik says:

server time out and...
Server Connection from 192.168.0.104:51183 DENIED, not an allowed IP

I tried to login on WoW that worked fine.. but there was no realm in the realmlist. Could someone plz help me?
Already thank for the efforts.

**ZestyJ** · 04-08-2010

The problem is in the configuration files. That video is old and leaves something out. At the bottom of the log on configuration file there is an "allowed ips" section you need to replace 127.0.0.1 with the ip you use for your log on server then it should work.

**Kiev** · 04-08-2010

Allowed IP's HAS to stay 127.0.0.1, thats the reason he is receiving a error, he changed it to his local IP, post your configs please.

**Alkamor** · 04-09-2010

Oke here are the configs :

Logon:

/***********************************************************************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
***********************************************************************
* Configure the logonserver to connect to the accounts database below *
***********************************************************************
* LogonDatabase.Host - The hostname that the database is located on
* LogonDatabase.Username - The username used for the mysql connection
* LogonDatabase.Password - The password used for the mysql connection
* LogonDatabase.Name - The database name
* LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
***********************************************************************/

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "owtbwidgwidg1"
Name = "logon"
Port = "3306"
Type = "1">

/* Host Directive
*
* This is the address that the realmlist will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

/* Server console logging level
*
* This directive controls how much output the server will
* display in it's console. Set to 0 for none.
* 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*/

<LogLevel Screen = "0"
File = "-1">

/* Account Refresh Time
*
* This controls on which time interval accounts gets
* refreshed. (In seconds)
* Default = 600
* 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
* These two directives set up which clients will be
* allowed to authenticate with the realm list.
*
* Set these to the same builds that the server was
* compiled for.
*
* As of the last update, version 3.3.3 was build 11685, patch 3.3.3a is 11723.
*/

<Client MinBuild = "11685"
MaxBuild = "11723">

/* WorldServer Setup
*
* RemotePassword
* This directive controls the password used to authenticate with the worldserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
* Default: "change_me_logon"
*
* AllowedIPs
* This section MUST be completed, otherwise all attempts to link your servers will fail.
* These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
* to make server connections to your logonserver, and register realms.
* For example, everything in the 127.0.0.* range would be:
* 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
* To allow a single IP,
* 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
* AllowedModIPs
* In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
* (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

This is it hope u can help me wih this ill +rep you 2 already for your time and help so far

**Minilano aka pro** · 04-09-2010

Have you checked if you ported right ? alot of peoples are going wrong there , but since you said that you coulden't see the realm then i think it most be a problem in the ''realm'' config .

**mag1212** · 04-09-2010

would you please post your world config aswell?

**Alkamor** · 04-09-2010

I have ported every port like he said in the discription of the video:S
here are the real and world cofigs :

Realm:

/***********************************************************************
* ArcEmu Realms Configuration File
* Last edited: 7/18/09
*
* Configure ArcEmu's Realms below
***********************************************************************/

/******************************************************
* LogonServer Section
*
* Address:
* The address (no port) of the server.
*
* Port:
* The port on which the logon server listens. (*** NOT 3724 ***)
*
* Name:
* Not really relavant, but name the logon.
*
* RealmCount:
* The number of realms in the next section.
*
******************************************************/

<LogonServer Address = "betrayalwow.servegame.com"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

/******************************************************
* Realm Section
*
* Name:
* The name of the realm.
*
* Address:
* The address (and port) of that realm.
*
* Icon:
* The type of realm (PVP, Normal, RPPVP, RP)
*
* TimeZone:
* The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
* 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
*
* Population:
* (0 = low, 1 = medium, 2 = high)
*
* Important information below
*
* change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
* This issues come up a lot!
*
* Timezone values :
* 0=Korean 16=China
* 1=Development 17=CN1
* 2=United States 18=CN2
* 3=Oceanic 19=CN3
* 4=Latin America 20=CN4
* 5=Tournament 21=CN5
* 6=Korean 22=CN6
* 8=English 23=CN7
* 9=German 24=CN8
* 10=French 25=Tournament
* 11=Spanish 26=Test Server
* 12=Russian 27=Tournament
* 13=Tournament 28=QA Server
* 14=Taiwan 29=CN9
* 15=Tournament 30=TestServer2
******************************************************/

<Realm1 Name = "Betrayal WoW"
Address = "betrayalwow.servegame.com:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

World:

Thanks for the help again ;P +rep for u guys

**Kiev** · 04-09-2010

Code:

<LogonServer Address = "betrayalwow.servegame.com"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

Change this to:

Code:

<LogonServer Address = "127.0.0.1"
	Port = "8093"
	Name = "Default Logon"
	RealmCount = "1">

And also:

Code:

<Listen Host = "betrayalwow.servegame.com"
        WorldServerPort = "8129">

To:

Code:

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">

**Alkamor** · 04-09-2010

Thanks i`ll go see if it works

Just 1 qeustion wil it be public if i change this?

**Kiev** · 04-09-2010

Yes

aslong as you dont change the last part of realms.conf it will work fine.

**Alkamor** · 04-09-2010

Oke :d thank you verry mutch it is working

i`ll +rep you again tomorrow when i am able 2 to it again

thank Kiev.

Shout-Out

User Tag List

Thread: [ArcEmu] Can`t connect my server after publicing it

Thread Tools

Search Thread

[ArcEmu] Can`t connect my server after publicing it

Similar Threads

[Mangos] Can't connect to server.

[ArcEmu] Server Public, Can't connect

[ArcEmu] Can't connect to my own server?

Friends can't connect to server

Server is public...I'm the only one that can connect..(+REP IF HELP)

OwnedCore Forums

casino

CoreCoins

My OwnedCore

About Us

Casino