Connecting through Hamachi... HELP!

[coolkid1]

When I edit my config files with my hamachi ip, it doesn't connect.

But when I change everything back to 127.0.0.1, it works. Can someone help me? My hamachi ip is: 5.126.131.2


Here are my configs:

Realms:

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "5.126.131.2"
             Port = "8093"
             Name = "Default Logon"
             RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    Colour:
#        Realm colour in realm list display.
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Chrispeee Repack"
        Address = "5.126.131.2:8129"
        Icon = "PVP"
        Colour = "1"
        Population = "1.0"
        TimeZone = "1">

Ascent:

#######################################################################
# Ascent Configuration File
# Last updated at revision 880 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
#   Database.Host      - The hostname that the database is located on
#   Database.Username  - The username used for the mysql connection
#   Database.Password  - The password used for the mysql connection
#   Database.Name      - The database name
#   Database.Port      - Port that MySQL listens on. Usually 3306.
#   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
#    Host
#        This is the address that the server will listen on.
#        To listen on all addresses, set it to 0.0.0.0
#        Default: 127.0.0.1 (localhost)
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "5.126.131.2"
        WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogLevel Screen="0" File="-1" World="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
#    PlayerLimit
#        This directive controls the amount of sessions that will be
#        accepted by the server before it starts to add people to 
#        the server queue.
#        Default: 100
#
#    PlrUpdateDistance
#        This directive controls the distance (internal yards) that the player can "see" up to
#        and receieve updates for. For smaller servers, you can probably increase this number.
#        Increasing this number will also increase the servers bandwidth consumption and CPU usage.
#        Default: 80
#
#    Motd
#        This message will be displayed by the server in the chat
#        box every time any user logs on. Colors can be used in the
#        standard WoW format.
#        Default: "No MOTD specified
#
#    Send Build On Join
#        This directive controls whether the server's internal revision
#        will be sent to clients upon entering the world. Use it to help
#        testers report bugs.
#
#    Send Stats On Join
#        This directive controls whether the server will send the online player
#        count to a cilent when it enters the world.
#
#    Breathing Setup
#        If the breathing code is causing problems or you want to run a fun server, you can disable 
#        water checks by enabling this directive.
#        Default: 1
#
#    Speedhack detection
#        If this directive is turned on, speedhack detection will be activated and speedhackers
#        will be warned / kicked.
#        Default: 0
#
#    Level Cap
#        This variable controls the level that stats will be generated up to internally.
#        Beyond this level players can still see a higher level visually but their stats won't
#        increase beyond this point.
#        Default: 60
#
#    Expansion 1 Level Cap
#       This variable does the same thing as Level Cap above, except it applies to those who
#       have the first expansion: The Burning Crusade.
#       Default: 70
#
#    Seperate Channels Control
#        This directive controls whether horde and alliance chats will be seperated across channels.
#        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
#        across channels.
#        Default: 0
#
#    Compression Threshold
#        This directive controls the limit when update packets will be compressed using deflate.
#        For lower-bandwidth servers use a lower value at the cost of cpu time.
#        Default: 1000
#
#    Queue Update Rate
#        This directive controls how many milliseconds (ms) between the updates
#        that the queued players receieve telling them their position in the queue.
#        Default: 5000 (5 seconds).
#
#    Kick AFK Players
#        Time in milliseconds (ms) that a player will be kicked after they go afk.
#        Default: 0 (disabled)
#
#    Connection Timeout
#        This directive specifies the amount of seconds that the client will be disconnected
#        after if no ping packet is sent. It is advised to leave it at the default.
#        Default: 180
#
#    Realm Type
#        This is the realm type that will be used by the server to handle world pvp.
#        Default: 0 (pve)(RPPVE)
#        Other values: 1(pvp)(RPPVP)
#
#    AdjustPriority
#        Set the server to high process priority?
#        Default: 0
#
#    RequireAllSignatures
#        This directive controls whether the full 10 signatures will be required in order
#        to turn in a petition. Smaller servers would be better off having it turned off.
#        Default: off
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "300"
        PlrUpdateDistance = "80"
        Motd = "!"        
        SendBuildOnJoin = "1"
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        SpeedhackProtection = "0"
        LevelCap = "60"
        Expansion1LevelCap = "70"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0">






#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
# 
#    These directives set up the multiplier in which regen values will be
#    multiplied by every 2 seconds.
#    Powers: 
#        Power1 = Mana, Power2 = Rage, Power3 = Energy
#    
#    Reputation:
#        Kill = Rep gained on kill, Quest = rep gained from quests
#
#    Honor:
#        Honor = multiplier used to calculate honor per-kill.
#
#    PvP:
#        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
#
#    XP:
#        The xp that a player receives from killing a creature will be multiplied
#        by this value in order to get his xp gain.
#
#    RestXP: 
#        Value is the amount of rest XP a player will recieve per minute of rest time.
#
#    Drop:
#        This value will be multiplied by any gold looted and the drop percentages of the
#        items for creatures will also be multiplied for this to determine which items
#        to drop.
#
#    Save:
#        Value in milliseconds (ms) that will be between player autosaves.
#        Default: 300000 (5 minutes)
# 
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="1"
       Power1="1"
       Power2="1"
       Power3="1"
       QuestReputation="1"
       KillReputation="1"
       Honor="1"
       PvPTimer="300000"
       Compression="1"
       XP="1"
       QuestXP="1"
       RestXP="1"
       Drop="1"
       DropMoney="1"
       Save="300000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
#   This should be set to 'gm_sync_channel' for the My_Master addon to work.
#
#   Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain Configuration
#
#   Set the path to the map_xx.bin files and whether unloading should be enabled
#   for the main world maps here. Unloading the main world maps when they go idle
#   can save a great amount of memory if the cells aren't being activated/idled
#   often. Instance/Non-main maps will not be unloaded ever.
#
#   Default:
#      MapPath = "maps"
#      UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps" UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
# 
#    Cheaters:
#        This directive sets up the cheater logging file, if turned on any
#        cheat / packet exploit / speedhack attempts will be logged here.
#
#    GMCommands:
#        These two directives set up the GM command logging fie. If turned on,
#        most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
#    These directives control the limits and behaviour of the ingame mail system.
#    All options must have Mail prefixed before them.
#   
#    ReloadDelay                 
#        Controls the delay at which the database is "refreshed". Use it if you're
#        inserting mail from an external source, such as a web-based interface.
#        0 turns it off.
#        Default: 0
#
#    DisablePostageCostsForGM 
#        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
#        Default: 1
#
#    DisablePostageCosts
#        Disables postage costs for all players.
#        Default: 0
#
#    DisablePostageDelayItems
#        Disables the one hour wait time when sending mail with items attached.
#        Default: 1
#
#    DisableMessageExpiry
#        Turns off the 30 day / 3 day after read message expiry time. 
#        WARNING: A mailbox still cannot show more than 50 items at once
#        (stupid limitation in client).
#        Default: 0
#
#    EnableInterfactionMail
#        Removes the faction limitation for sending mail messages. Applies to all players.
#        Default: 1
#
#    EnableInterfactionMailForGM 
#        Removes the faction limitation for sending mail messages, but only applies
#        to GM's. EnableInterfactionMail overrides this.
#        Default: 1
#   
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
#        These directives set up the status dumper plugin. Filename is an
#        absolute or relative path to the server binary. Interval is the
#        time that the stats will be dumped to xml.
#        Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
#    Preloading
#        This directive controls whether the entire world will be spawned at server
#        startup or on demand. It is advised to leave it disabled unless you are a
#        developer doing testing.
#        Default: off
#
#    Background Loot Loading
#        This directive controls whether loot will be loaded progressively during
#        startup or in the background in a seperate thread. Turning it on will
#        result in much faster startup times.
#        Default: on
#
#    Multithreaded Startup
#        This controls whether the server will spawn multiple worker threads to
#        use for loading the database and starting the server. Turning it on
#        increases the speed at which it starts up for each additional cpu in your
#        computer.
#        Default: on
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
#    Lines
#        This is the number of "messages" or lines that it will allow before stopping messages from
#        being sent. This counter is reset every "Seconds" seconds.
#        Default: 0 (disabled)
#
#    Seconds
#        This is the number of seconds inbetween the Line counter being reset.
#        Default: 0 (disabled)
#
#    SendMessage
#        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
#        message will be sent upon flood triggering.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
#    DisablePings   
#        This directive controls whether pings will be sent to the logonserver to check
#        if the connection is still "alive". Expect problems if it is disabled.
#        Default: 0
#
#    RemotePassword
#        This directive controls the password used to authenticate with the logonserver.
#        It must be the same between the two configs. If it is not, your server will
#        not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
             RemotePassword = "ascent">

Logonserver:

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
               Username = "root"
               Password = "root"
               Name     = "ascent"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "127.0.0.1"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8129">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "1"
        MaxBuild = "9999">

# WorldServer Setup
#
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#

<LogonServer RemotePassword = "ascent">

[Daxo]

Ill help you... it will take about 5-10 min to post all the corrections though.

[coolkid1]

Thanks man

[Illidan1]

Make your Logon Server look like this \/

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
               Username = "root"
               Password = "ascent"
               Name     = "logon"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600
#

<Rates AccountRefresh = "60">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "6262"
        MaxBuild = "9999">

# WorldServer Setup
#
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#

<LogonServer RemotePassword = "ascent">

And make this part of your Ascent look like this \/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
#    Host
#        This is the address that the server will listen on.
#        To listen on all addresses, set it to 0.0.0.0
#        Default: 127.0.0.1 (localhost)
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

See if that helps

[coolkid1]

When I open up ascent.exe, it gets stuck at connecting to default logon, will try again later.

[Daxo]

Ok here is what you do... Here are all the changes you need to make But first make a copy of your .CONF files...



Changes in Relms

<LogonServer Address = "5.126.131.2"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

To

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

Changes in Acsent


Change

<WorldDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">

TO

<WorldDatabase Hostname = "(Your IP here)" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "Your IP here)t" Username = "root" Password = "root" Name = "ascent" Port = "3306" Type = "1">

Change

<Listen Host = "5.126.131.2"
WorldServerPort = "8129">

TO

<Listen Host = "0.0.0.0"
WorldServerPort = "8129">

Changes in Loginserver


Change

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "root"
Name = "ascent"
Port = "3306"
Type = "1">

TO

<LogonDatabase Hostname = "127.0.0.1"
Username = "root"
Password = "root"
Name = "ascent"
Port = "3306"
Type = "1">

(Its the same but 127.0.0.1 looks cooler

Change

<Listen Host = "127.0.0.1"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8129">

TO

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8129">

And that should work...
Illidan1 beat me to it but try mine if his doesn't work

[Illidan1]

Ok here are Chirspee's Normal Config's i will just add your Hamachi Ip to them
Copy the Stuff inside your Conifgs and put it in a note pad first in case this Don't work

And Daxo put your Ones in a Code

Ascent \/

#####################################################################################
#                            Ascent Configuration File                              #
#                                                                                   #
#    ~*~AscentEmu~*~                                                                #
#    Revision Author:    Gastricpenguin                                             #
#    Revision Number:    1752                                                       #
#                                                                                   #
#####################################################################################
#####################################################################################
# Database Section
#
#   Database.Host      - Either localhost or 127.0.0.1
#   Database.Username  - Mysql Username
#   Database.Password  - Mysql Password
#   Database.Name      - SQL Database Name
#   Database.Port      - Please do not modify this port. Unless you know what to do
#   Database.Type      - 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
######################################################################################

<WorldDatabase Hostname = "127.0.0.1" 
               Username = "root" 
               Password = "ascent" 
               Name     = "ascent" 
               Port     = "3306" 
               Type     = "1">

<CharacterDatabase Hostname = "127.0.0.1" 
                   Username = "root" 
                   Password = "ascent" 
                   Name     = "ascent" 
                   Port     = "3306" 
                   Type     = "1">



######################################################################################
# Listen Config
#
#    Host
#        This numbers indicate what address the server will listen on
#        If you are making your server live with a DNS name, leave it default
#        Default: 0.0.0.0
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
######################################################################################

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">



######################################################################################
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
######################################################################################

<LogLevel Screen="0" File="-1" World="0">




######################################################################################
# Server Settings
#
#    PlayerLimit
#        This directive controls the amount of sessions that will be
#        accepted by the server before it starts to add people to 
#        the server queue.
#        Default: 100
#
#    PlrUpdateDistance
#        Controls the distance a player can see objects and updates. 
#        Normally, a higher number will consume more bandwith and CPU usage on 
#        your computer. The default value is always suggested.
#        Default: 80
#
#    Motd
#        Message of the Day
#        Default: "No MOTD specified"
#
#    Send Build On Join
#        This directive controls whether the server's internal revision
#        will be sent to clients upon entering the world. Use it to help
#        testers report bugs.
#
#    Send Stats On Join
#        This directive controls whether the server will send the online player
#        count to a cilent when it enters the world.
#
#    Breathing Setup
#        If the breathing code is causing problems or you want to run a fun server, you can 
#        disable water checks by enabling this directive.
#        Default: 1
#
#    Level Cap
#        Level cap of the server. If a player is higher than this number
#        they will not recieve any stat changes per level.
#        Default: 60
#
#	Expansion 1 Level Cap
#	   This variable does the same thing as Level Cap above, except it applies to those 
#          who have the first expansion: The Burning Crusade.
#	   Default: 70
#
#    Seperate Channels Control
#        This directive controls whether horde and alliance chats will be seperated across 
#        channels.
#        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak 
#        to each other across channels.
#        Default: 0
#
#    Compression Threshold
#        This directive controls the limit when update packets will be compressed using 
#        deflate. For lower-bandwidth servers use a lower value at the cost of cpu time.
#        Default: 1000
#
#    Queue Update Rate
#        This directive controls how many milliseconds (ms) between the updates
#        that the queued players receieve telling them their position in the queue.
#        Default: 5000 (5 seconds).
#
#    Kick AFK Players
#        Time in milliseconds (ms) that a player will be kicked after they go afk.
#        Default: 0 (disabled)
#
#    Connection Timeout
#        This directive specifies the amount of seconds that the client will be 
#        disconnected after if no ping packet is sent. It is advised to leave it at 
#        the default.
#        Default: 180
#
#    Realm Type
#        This is the realm type that will be used by the server to handle world pvp.
#        Default: 0 (pve)(RPPVE)
#        Other values: 1(pvp)(RPPVP)
#
#    AdjustPriority
#        Set the server to high process priority?
#        Default: 0
#
#    RequireAllSignatures
#        This directive controls whether the full 10 signatures will be required in order
#        to turn in a petition. Smaller servers would be better off having it turned off.
#        Default: off
#
#    ShowGMInWhoList
#        This directive controls whether GM's will be shown in player's who lists or not.
#        Default: on
#
#    MapUnloadTime
#        This directive controls whether to unload map cells after an idle period of <x> 
#        seconds. Use on smaller servers or servers that are memory-limited. The server 
#        without cellunloading can use over 1.2GB memory with all creatures loaded.
#        Default: 0
######################################################################################

<Server PlayerLimit = "100"
        PlrUpdateDistance = "80"
        Motd = "Chrispee Repack"        
        SendBuildOnJoin = "1"
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        LevelCap = "60"
        Expansion1LevelCap = "70"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0">



######################################################################################
# Power regeneration multiplier setup
# 
#    These directives set up the multiplier in which regen values will be
#    multiplied by every 2 seconds.
#    Powers: 
#        Power1 = Mana, Power2 = Rage, Power3 = Energy
#    
#    Reputation:
#        Kill = Rep gained on kill, Quest = rep gained from quests
#
#    Honor:
#        Honor = multiplier used to calculate honor per-kill.
#
#    PvP:
#        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins 
#        (300000)
#
#    XP:
#        The xp that a player receives from killing a creature will be multiplied
#        by this value in order to get his xp gain.
#
#    RestXP: 
#        Value is the amount of rest XP a player will recieve per minute of rest time.
#
#    Drop(Color):
#        These values will be multiplied by the drop percentages of the items for creatures
#        to determine which items to drop. All default to 1.
#        To allow you better control of drops, separate multipliers have been created for 
#        items of each quality group. 
#
#    DropMoney:
#        This value will be multiplied by any gold looted and pickpocketed
#
#    Save:
#        Value in milliseconds (ms) that will be between player autosaves.
#        Default: 300000 (5 minutes)
# 
#    SkillChance:
#        The chance that you have to level up a skill in melee or a profession is 
#        multiplied
#        by this value.
#        Default: 1
#
#    SkillRate:
#        The amount of "levels" your skill goes up each time you gain a level is multiplied
#        by this value.
#
#    ArenaMultiplier
#         Every week/day the arena points gained by a player will be multiplied by this value.
######################################################################################

<Rates Health="1"
       Power1="1"
       Power2="1"
       Power3="1"
       QuestReputation="1"
       KillReputation="1"
       Honor="1"
       PvPTimer="300000"
       Compression="1"
       XP="1"
       QuestXP="1"
       RestXP="1"
       DropGrey="1"
       DropWhite="1"
       DropGreen="1"
       DropBlue="1"
       DropPurple="1"
       DropOrange="1"
       DropArtifact="1"
       DropMoney="1"
       Save="300000"
       SkillChance="1"
       SkillRate="1"
       ArenaMultiplier2x="1"
       ArenaMultiplier3x="1"
       ArenaMultiplier5x="1">



######################################################################################
# GM Client Channel
#
#   This should be set to 'gm_sync_channel' for the My_Master addon to work.
#   Default: gm_sync_channel
######################################################################################

<GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">




######################################################################################
# Terrain Configuration
#
#   Set the path to the map_xx.bin files and whether unloading should be enabled
#   for the main world maps here. Unloading the main world maps when they go idle
#   can save a great amount of memory if the cells aren't being activated/idled
#   often. Instance/Non-main maps will not be unloaded ever.
#
#   Default:
#      MapPath = "maps"
#      UnloadMaps = 1
######################################################################################

<Terrain MapPath = "maps" UnloadMaps = "1">




######################################################################################
# Log Settings
# 
#    Cheaters:
#        This directive sets up the cheater logging file, if turned on any
#        cheat / packet exploit / speedhack attempts will be logged here.
#
#    GMCommands:
#        These two directives set up the GM command logging fie. If turned on,
#        most gm commands will be logged for this file for abuse investigation, etc.
######################################################################################

<Log Cheaters="0" GMCommands="0">




######################################################################################
# Mail System Setup
#
#    These directives control the limits and behaviour of the ingame mail system.
#    All options must have Mail prefixed before them.
#   
#    ReloadDelay                 
#        Controls the delay at which the database is "refreshed". Use it if you're
#        inserting mail from an external source, such as a web-based interface.
#        0 turns it off.
#        Default: 0
#
#    DisablePostageCostsForGM 
#        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
#        Default: 1
#
#    DisablePostageCosts
#        Disables postage costs for all players.
#        Default: 0
#
#    DisablePostageDelayItems
#        Disables the one hour wait time when sending mail with items attached.
#        Default: 1
#
#    DisableMessageExpiry
#        Turns off the 30 day / 3 day after read message expiry time. 
#        WARNING: A mailbox still cannot show more than 50 items at once
#        (stupid limitation in client).
#        Default: 0
#
#    EnableInterfactionMail
#        Removes the faction limitation for sending mail messages. Applies to all players.
#        Default: 1
#
#    EnableInterfactionMailForGM 
#        Removes the faction limitation for sending mail messages, but only applies
#        to GM's. EnableInterfactionMail overrides this.
#        Default: 1 
######################################################################################

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">




######################################################################################
# Status Dumper Config
#
#        These directives set up the status dumper plugin. Filename is an
#        absolute or relative path to the server binary. Interval is the
#        time that the stats will be dumped to xml.
#        Default: stats.xml / 120000 (2 minutes)
######################################################################################

<StatDumper FileName = "stats.xml" Interval = "120000">




######################################################################################
# Startup Options
#
#    Preloading
#        This directive controls whether the entire world will be spawned at server
#        startup or on demand. It is advised to leave it disabled unless you are a
#        developer doing testing.
#        Default: off
#
#    Background Loot Loading
#        This directive controls whether loot will be loaded progressively during
#        startup or in the background in a seperate thread. Turning it on will
#        result in much faster startup times.
#        Default: on
#
#    Multithreaded Startup
#        This controls whether the server will spawn multiple worker threads to
#        use for loading the database and starting the server. Turning it on
#        increases the speed at which it starts up for each additional cpu in your
#        computer.
#        Default: on
######################################################################################

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1">




######################################################################################
# Flood Protection Setup
#
#    Lines
#        This is the number of "messages" or lines that it will allow before stopping 
#        messages from
#        being sent. This counter is reset every "Seconds" seconds.
#        Default: 0 (disabled)
#
#    Seconds
#        This is the number of seconds inbetween the Line counter being reset.
#        Default: 0 (disabled)
#
#    SendMessage
#        If this is enabled, a "Your message has triggered serverside flood protection. You 
#        can speak again in %u seconds."
#        message will be sent upon flood triggering.
#        Default: 0
######################################################################################

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">




######################################################################################
# LogonServer Setup
#
#    DisablePings   
#        Control whether pings will be sent to check if the connection is still "alive". 
#        Expect problems if it is disabled.
#        Default: 0
#
#    RemotePassword
#        You do not have to change this, as the password is the same in both conf's
######################################################################################

<LogonServer DisablePings = "0"
             RemotePassword = "Detonation">




######################################################################################
# AntiHack Setup
#
#    Teleport   
#        This directive controls anti-teleport hack checks will be enabled or not.
#        Default: 1
#
#    Speed
#        This directive controls anti-speed hack checks will be performed on player 
#         movement or not.
#        Default: 1
#
#    FallDamage
#        This directive controls anti-fall damage hack checks will be performed on player 
#        movement or not.
#        Default: 1
#
#    Flying
#        This directive controls whether flight hacks will be performed on players or not.
#        Default: 1
#
#    DisableOnGM
#        This directive controls hack checks will be disabled for GM's or not.
#        Default: 0
######################################################################################

<AntiHack Teleport="1"
          Speed="1"
          FallDamage="1"
          Flying="1"
          DisableOnGM="1">





######################################################################################
# Period Setup
#
#    These are the periods that the server will wait before doing periodic duties. At the 
#    moment only arena point calculation and honor point calculation are used here.
#
#    Default:
#         Arena: weekly
#         Honor: daily
#             (blizzlike values)
######################################################################################

<Periods HonorUpdate="daily"
         ArenaUpdate="weekly">
         



######################################################################################
#                               AscentStats Setup		
#          Info: This sends information to the server to detect any problems
#
#    Enable
#         To disable stat transmission completely, set this to 0.
#
#    ServerGUID
#         This is the GUID assigned to your server by the AscentStats server. To register 
#         your server, go
#         to http://www.example.com/ascentstats/register_server.php
#
#    ServerKey
#         This is the key used to secure stats sent by your server so they can't be forged. 
#         This key is
#         obtained after registering your server.
#
#    Default:
#         Enabled
#         Server Key "NONE"
#         Server GUID "NONE"
######################################################################################

<AscentStats Enable="1"
             ServerGUID="NONE"
             ServerKey="NONE">





######################################################################################
# Channels Setup
#
#    These directives control some of the aspects in the channel system.
#
#    BannedChannels
#         If you would like to ban users from creating or joining a channel specify them 
#         here in a ';'
#         seperated list.
#         Default: ""
#
#    GeneralChannels
#         These are the default channels that the client joins and cannot have leaders.
#         Default: "General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;"
######################################################################################

<Channels BannedChannels=""
          GeneralChannels="General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;">






######################################################################################
#                       End of Ascent Configuration File                             #
#                                                                                    #
#    Credits:                                                                        #
#            Thanks for your continued support :D                                    #
#            Love, Gastricpenguin and Chrispee                                                   #
#                                                                                    #
######################################################################################

Here is LogonServer Config \/

#####################################################################################
#                                Logonserver Configuration File                     #
#                                                                                   #
#    ~*~AscentEmu~*~                                                                #
#    Revision Author:    Gastricpenguin                                             #
#    Revision Number:    1752                                                       #
#                                                                                   #
#####################################################################################
#####################################################################################
# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - Either localhost or 127.0.0.1
#    LogonDatabase.Username  - Mysql Username
#    LogonDatabase.Password  - Mysql Password
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#####################################################################################

<LogonDatabase Hostname = "127.0.0.1"
               Username = "root"
               Password = "ascent"
               Name     = "ascent"
               Port     = "3306"
               Type     = "1">



#####################################################################################
# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#####################################################################################

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">



#####################################################################################
# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#####################################################################################

<LogLevel Screen = "0"
          File = "-1">



#####################################################################################
# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600
#####################################################################################

<Rates AccountRefresh = "600">



#####################################################################################
# Accepted Build Range Setup
#
#    Min Build
#       Minimum client build that is allowed to access the server
#
#    Max Build
#       Maximum client build that is allowed to access the server
#
#    Latest build for Wow 2.2.0 is 7272
#    Default: 7272
#####################################################################################

<Client MinBuild = "6800"
        MaxBuild = 9999">



#####################################################################################
# WorldServer Setup
#
#    You do not have to change this, as the password is the same in both conf's
#####################################################################################

<LogonServer RemotePassword = "Detonation">

Here is the Realm's Config \/

#####################################################################################
#                                   Realms Configuration File                       #
#                                                                                   #
#    ~*~AscentEmu~*~                                                                #
#    Revision Author:    Gastricpenguin                                             #
#    Revision Number:    1752                                                       #
#                                                                                   #
#####################################################################################
#####################################################################################
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#####################################################################################

<LogonServer Address = "5.126.131.2"
             Port = "8093"
             Name = "Logon"
             RealmCount = "1">



#####################################################################################
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    Colour:
#        Realm colour in realm list display.
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#####################################################################################

<Realm1 Name = "Chrispee Ascent Repack"
        Address = "5.126.131.2:8129"
        Icon = "Normal"
        Colour = "1"
        Population = "0"
        TimeZone = "1">

Ok now make your Config's like that

[coolkid1]

Guys it's not working.

[Illidan1]

Humm, What is the error you get?

[coolkid1]

Still says "Connection fail, I will try again later."

[Illidan1]

In "Ascent.exe" ?

[coolkid1]

Yeah. It has to do with the config files, I'm sure.

[Illidan1]

And When you change your Realmlist Config to "127.0.0.1"
It works?

[coolkid1]

Yeah. When everything is set to default it works. When you told me to change the logon server stuff from 127.0.0.1 to my stuff, that won't work.

[Illidan1]

Humm, Very wired Well sorry but this one i cant figure out
Try reinstalling his Repack and see if it works