I am not able to make my server public. menu

Shout-Out

User Tag List

Results 1 to 14 of 14
  1. #1
    killerweb0's Avatar Member
    Reputation
    1
    Join Date
    May 2007
    Posts
    25
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    I am not able to make my server public.

    Hello
    I have a problem when trying to connect my server to the internet. I'm running OpenAscent (ArcEmu). I'm sure i have all the ports forwarded since i forwarded them all on my firewall and my internet service provider says that all ports are forwarded on my router except for 25 TCP/UDP. Here's my config files: (my ascent-world have been cut (~~) because of all the extra multipler and level stuff which dosnt affect anything on the internet.) (There may be some places where the code dosnt look commented but it is on my .conf files.)


    ascent-world.conf:
    Code:
    #######################################################################
    # OpenAscent Configuration File
    # Last Update: : ascent-world.conf 309 2008-06-03 14:29:43Z tazjin $
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Database Section
    #
    #   Database.Host      - The hostname that the database is located on
    #   Database.Username  - The username used for the mysql connection
    #   Database.Password  - The password used for the mysql connection
    #   Database.Name      - The database name
    #   Database.Port      - Port that MySQL listens on. Usually 3306.
    #   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <WorldDatabase Hostname = "localhost" Username = "root" Password = "***" Name = "world" Port = "3306" Type = "1">
    <CharacterDatabase Hostname = "localhost" Username = "root" Password = "***" Name = "logon" Port = "3306" Type = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Listen Config
    #
    #    Host
    #        This is the address that the server will listen on.
    #        To listen on all addresses, set it to 0.0.0.0
    #        Default: 127.0.0.1 (localhost)
    #
    #    WorldServerPort
    #        This is the port that the world server listens on.
    #        It has to be the same as what is specified in the
    #        realms table in the LogonDatabase.
    #        Default: 8129
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Listen Host = "0.0.0.0"
            WorldServerPort = "8129">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Level Setup
    #
    #    Console Logging Level
    #        This directive controls how much output the server will
    #        display in it's console. Set to 0 for none, or -1 to disable.
    #        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #        Default: 3
    #
    #    World server packet logging feature
    #        If this directive is turned on, a file called `world.log`
    #        will be created in the server's directory and all packets
    #        sent and received by clients will be dumped here in bfg
    #        format.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogLevel Screen="0" File="-1" World="0">
    
    ~~~~~~~~~~~~~~~~~~~(CUT)~~~~~~~~~~~~~~~~~~~~
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    #    If this triggers it means you didn't read your config file!
    #    Just comment it or remove it when you've read this.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    # <die msg="I am a newb who didn't even read half my config file!">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Power regeneration multiplier setup
    # 
    #    These directives set up the multiplier in which regen values will be
    #    multiplied by every 2 seconds.
    #    Powers: 
    #        Power1 = Mana, Power2 = Rage, Power3 = Energy
    #    
    #    Reputation:
    #        Kill = Rep gained on kill, Quest = rep gained from quests
    #
    #    Honor:
    #        Honor = multiplier used to calculate honor per-kill.
    #
    #    PvP:
    #        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
    #
    #    XP:
    #        The xp that a player receives from killing a creature will be multiplied
    #        by this value in order to get his xp gain.
    #
    #    RestXP: 
    #        Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
    #        Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
    #        F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
    #        Note that resting in a resting area (Zzz) goes 4 times faster.
    #        Default: 1 (bubble every 8 hrs)
    #
    #    Drop(Color):
    #        These values will be multiplied by the drop percentages of the items for creatures
    #        to determine which items to drop. All default to 1.
    #        To allow you better control of drops, separate multipliers have been created for items 
    #        of each quality group. 
    #
    #    DropMoney:
    #        This value will be multiplied by any gold looted and pickpocketed
    #
    #    Save:
    #        Value in milliseconds (ms) that will be between player autosaves.
    #        Default: 300000 (5 minutes)
    # 
    #    SkillChance:
    #        The chance that you have to level up a skill in melee or a profession is multiplied
    #        by this value.
    #        Default: 1
    #
    #    SkillRate:
    #        The amount of "levels" your skill goes up each time you gain a level is multiplied
    #        by this value.
    #
    #    ArenaMultiplier
    #         Every week/day the arena points gained by a player will be multiplied by this value.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Rates Health="10"
           Power1="10"
           Power2="10"
           Power3="10"
           QuestReputation="100"
           KillReputation="50"
           Honor="15"
           PvPTimer="3000"
           Compression="1"
           XP="100"
           QuestXP="200"
           RestXP="20"
           DropGrey="1"
           DropWhite="10"
           DropGreen="20"
           DropBlue="50"
           DropPurple="60"
           DropOrange="50"
           DropArtifact="1"
           DropMoney="500"
           Save="120000"
           SkillChance="100"
           SkillRate="100"
           ArenaMultiplier2x="10"
           ArenaMultiplier3x="10"
           ArenaMultiplier5x="10">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # GM Client Channel
    #
    #   This should be set to 'gm_sync_channel' for the My_Master addon to work.
    #   Default: gm_sync_channel
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <GMClient GmClientChannel = "gm_sync_channel">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Terrain & Collision Settings
    #
    #   Set the path to the map_xx.bin files and whether unloading should be enabled
    #   for the main world maps here. Unloading the main world maps when they go idle
    #   can save a great amount of memory if the cells aren't being activated/idled
    #   often. Instance/Non-main maps will not be unloaded ever.
    #
    #   Default:
    #      MapPath = "maps"
    #      vMapPath = "vmaps"
    #      UnloadMaps = 1
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Terrain MapPath = "maps"
             vMapPath = "vmaps"
             UnloadMaps = "1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Log Settings
    # 
    #    Cheaters:
    #        This directive sets up the cheater logging file, if turned on any
    #        cheat / packet exploit / speedhack attempts will be logged here.
    #
    #    GMCommands:
    #        These two directives set up the GM command logging fie. If turned on,
    #        most gm commands will be logged for this file for abuse investigation, etc.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Log Cheaters="1" GMCommands="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Mail System Setup
    #
    #    These directives control the limits and behaviour of the ingame mail system.
    #    All options must have Mail prefixed before them.
    #   
    #    ReloadDelay                 
    #        Controls the delay at which the database is "refreshed". Use it if you're
    #        inserting mail from an external source, such as a web-based interface.
    #        0 turns it off.
    #        Default: 0
    #
    #    DisablePostageCostsForGM 
    #        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
    #        Default: 1
    #
    #    DisablePostageCosts
    #        Disables postage costs for all players.
    #        Default: 0
    #
    #    DisablePostageDelayItems
    #        Disables the one hour wait time when sending mail with items attached.
    #        Default: 1
    #
    #    DisableMessageExpiry
    #        Turns off the 30 day / 3 day after read message expiry time. 
    #        WARNING: A mailbox still cannot show more than 50 items at once
    #        (stupid limitation in client).
    #        Default: 0
    #
    #    EnableInterfactionMail
    #        Removes the faction limitation for sending mail messages. Applies to all players.
    #        Default: 1
    #
    #    EnableInterfactionMailForGM 
    #        Removes the faction limitation for sending mail messages, but only applies
    #        to GM's. EnableInterfactionMail overrides this.
    #        Default: 1
    #   
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Mail ReloadDelay="0"
          DisablePostageCostsForGM="1"
          DisablePostageCosts="0"
          DisablePostageDelayItems="1"
          DisableMessageExpiry="0"
          EnableInterfactionMail="1"
          EnableInterfactionMailForGM="1">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Status Dumper Config
    #
    #        These directives set up the status dumper plugin. Filename is an
    #        absolute or relative path to the server binary. Interval is the
    #        time that the stats will be dumped to xml.
    #        Default: stats.xml / 120000 (2 minutes)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <StatDumper FileName = "stats.xml" Interval = "120000">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Startup Options
    #
    #    Preloading
    #        This directive controls whether the entire world will be spawned at server
    #        startup or on demand. It is advised to leave it disabled unless you are a
    #        developer doing testing.
    #        Default: off
    #
    #    Background Loot Loading
    #        This directive controls whether loot will be loaded progressively during
    #        startup or in the background in a seperate thread. Turning it on will
    #        result in much faster startup times.
    #        Default: on
    #
    #    Multithreaded Startup
    #        This controls whether the server will spawn multiple worker threads to
    #        use for loading the database and starting the server. Turning it on
    #        increases the speed at which it starts up for each additional cpu in your
    #        computer.
    #        Default: on
    #
    #    Additional Table Binding
    #        You can load static item/creature/etc data into the server using this directive.
    #        This way throughout database updates your custom data can be preserved.
    #        Format: "sourcetable destination table,sourcetable destinationtable"
    #        Example: "myitems items,mynpcs creature_names"
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Startup Preloading = "0"
             BackgroundLootLoading = "1"
             EnableMultithreadedLoading = "1"
             LoadAdditionalTables="">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Flood Protection Setup
    #
    #    Lines
    #        This is the number of "messages" or lines that it will allow before stopping messages from
    #        being sent. This counter is reset every "Seconds" seconds.
    #        Default: 0 (disabled)
    #
    #    Seconds
    #        This is the number of seconds inbetween the Line counter being reset.
    #        Default: 0 (disabled)
    #
    #    SendMessage
    #        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
    #        message will be sent upon flood triggering.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Setup
    #
    #    DisablePings   
    #        This directive controls whether pings will be sent to the logonserver to check
    #        if the connection is still "alive". Expect problems if it is disabled.
    #        Default: 0
    #
    #    RemotePassword
    #        This directive controls the password used to authenticate with the logonserver.
    #        It must be the same between the two configs. If it is not, your server will
    #        not register.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer DisablePings = "0"
                 RemotePassword = "***">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AntiHack Setup
    #
    #    Teleport   
    #        This directive controls anti-teleport hack checks will be enabled or not.
    #        Default: 1
    #
    #    Speed
    #        This directive controls anti-speed hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    SpeedThreshold
    #        This directive controls the threshold at which the speedhack detection will trip.
    #        It's (characters' move time of distance - real move time of distance)
    #        Default: -600.0
    #
    #    FallDamage
    #        This directive controls anti-fall damage hack checks will be performed on player movement or not.
    #        Default: 1
    #
    #    Flying
    #        This directive controls whether flight hacks will be performed on players or not.
    #        Default: 1
    #
    #    FlightThreshold
    #	   This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
    #	   Default: 10
    #
    #    DisableOnGM
    #        This directive controls hack checks will be disabled for GM's or not.
    #        Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AntiHack Teleport="1"
              Speed="1"
              SpeeedThreshold="-600.0"
              FallDamage="1"
              Flight="1"
    	  FlightThreshold="10" 
              DisableOnGM="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Period Setup
    #
    #    These are the periods that the server will wait before doing periodic duties. At the moment only
    #    arena point calculation and honor point calculation are used here.
    #
    #    Default:
    #         Arena: weekly
    #         Honor: daily
    #             (blizzlike values)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Periods HonorUpdate="daily"
             ArenaUpdate="weekly"
             DailyUpdate="daily">
             
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # AscentStats Setup				*** PRIVACY NOTE: READ ME CAREFULLY ***
    #
    #    These are the values that the AscentStats client uses while communicating with an AscentStats server.
    #    Statistics will be sent anonymously if a server guid is not set.
    #    If you do not want your ascent client communicating with AscentStats servers, disable it here.
    #    No personally-identifiable information is sent in these transmissions. The actual data sent is:-
    #      stats=Ascent|PLATFORM|CONFIG|ARCH|REV|PLAYER|QUEUE|ALLIANCE|HORDE|AVGLAT|PEAK
    #
    #    If you don't mind your server transmitting this information, please leave AscentStats enabled. It
    #    allows our developers to understand our users needs better and in the end provide you with a better
    #    product.
    #
    #    Enable
    #         To disable stat transmission completely, set this to 0.
    #
    #    ServerGUID
    #         This is the GUID assigned to your server by the AscentStats server. To register your server, go
    #         to http://www.example.com/ascentstats/register_server.php
    #
    #    ServerKey
    #         This is the key used to secure stats sent by your server so they can't be forged. This key is
    #         obtained after registering your server.
    #
    #    Default:
    #         Enabled
    #         Server Key "NONE"
    #         Server GUID "NONE"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <AscentStats Enable="1"
                 ServerGUID="NONE"
                 ServerKey="NONE">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Channels Setup
    #
    #    These directives control some of the aspects in the channel system.
    #
    #    BannedChannels
    #         If you would like to ban users from creating or joining a channel specify them here in a ';'
    #         seperated list.
    #         Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Channels BannedChannels="">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # VoiceChat Setup
    #
    #    These directives control some of the aspects in the voice chat system.
    #
    #    Enabled
    #         If you want to enable the voice chat system, this must be set to 1.
    #         Default: "0"
    #
    #    ServerIP
    #         This is the IP of the voice chat server.
    #         Default: "127.0.0.1"
    #
    #    ServerPort
    #         This is the TCP port of the voice chat server.
    #         Default: "3727"
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <VoiceChat Enabled="0"
               ServerIP="127.0.0.1"
               ServerPort="3727">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Remote Console Setup
    #
    #    These directives control the remote administration console.
    #
    #    Enabled
    #         If you want to enable the remote administration console, set this.
    #         Default: 0
    #
    #    Host
    #         This is the interface the RA server listens on.
    #         Default: "0.0.0.0"
    #
    #    Port
    #         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
    #         Default: 8092
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <RemoteConsole Enabled="0"
                   Host="0.0.0.0"
                   Port="8092">
          
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Scripting Engine Setup
    #
    #    Ascent can support multiple script backends via the means of loading .dll files for them.
    #    This section in the config can enable/disable those backends.
    #
    #    LUA
    #         If you would like to enable the LUA scripting backend, enable this.
    #         Default: 0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <ScriptBackends LUA="0"
                    AS="0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Movement Setup
    #
    #    NOTE: For any of these directives to function, movement compression has to be compiled into
    #          the server.
    #
    #    FlushInterval
    #        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
    #        If you have a high threshold, keeping this at 1-2 seconds will work better.
    #        Default: 1000 (one second)
    #
    #    CompressionRate
    #        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
    #        Range: 1-9 (or 0 is disable)
    #        Default: 1
    #
    #    CompressionThreshold
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. It is advised to keep it at least 30 units. This value is used for players.
    #        Default: 30.0
    #
    #    CompressionThresholdCreatures
    #        This is the distance that will be used to determine if an object needs to be sent compressed or
    #        normal. This value is used for creatures, so it can be a lot lower.
    #        Default: 10.0
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Movement FlushInterval="1000"
              CompressRate="1"
              CompressThreshold="30.0"
              CompressThresholdCreatres="10.0">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Die Directive
    #
    #    You should know what to do here :P
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    # <die2 msg="I read nearly all my config file, but not the whole thing!">
    
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Localization Setup
    #
    #    LocaleBindings
    #        This is a list of locale names and the other locale you want to associate with them.
    #        For example, to make the European client always use the french language, "enGB=frFR"
    #
    #        Must be terminated by a space.
    #
    #        Default: ""
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Localization LocaleBindings="">

    ascent-logonserver.conf:
    Code:
    #######################################################################
    # OpenAscent Realms Configuration File  
    # Last updated at revision 446 by Burlex
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    # LogonDatabase Section
    #
    #    These directives are the location of the `realms` and `accounts`
    #    tables.
    #
    #    LogonDatabase.Host      - The hostname that the database is located on
    #    LogonDatabase.Username  - The username used for the mysql connection
    #    LogonDatabase.Password  - The password used for the mysql connection
    #    LogonDatabase.Name      - The database name
    #    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
    #    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
    #
    
    <LogonDatabase Hostname = "localhost"
                   Username = "root"
                   Password = "***"
                   Name     = "logon"
                   Port     = "3306"
                   Type     = "1">
    
    
    # Host Directive
    #
    #    This is the address that the realmlist will listen on.
    #    To listen on all addresses, set it to 0.0.0.0
    #    Default: 127.0.0.1 (localhost)
    #
    #    Note: ISHost is the interserver communication listener.
    #
    
    <Listen Host = "0.0.0.0"
            ISHost = "0.0.0.0"
            RealmListPort = "3724"
            ServerPort = "8093">
    
    # Server console logging level
    #
    #    This directive controls how much output the server will
    #    display in it's console. Set to 0 for none.
    #    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
    #    Default: 3
    #
    
    <LogLevel Screen = "0"
              File = "-1">
    
    # Account Refresh Time
    #
    #    This controls on which time interval accounts gets 
    #    refreshed. (In seconds)
    #    Default = 600
    #
    
    <Rates AccountRefresh = "600">
    
    # Accepted Build Range Setup
    #
    #    These two directives set up which clients will be
    #    allowed to authenticate with the realm list.
    #
    #    Set these to the same builds that the server was
    #    compiled for.
    #
    #    As of the last update, version 2.1.1 was build 6739.
    #
    
    <Client MinBuild = "1"
            MaxBuild = "9999">
    
    # WorldServer Setup
    #
    #  RemotePassword
    #    This directive controls the password used to authenticate with the worldserver.
    #    It must be the same between the two configs. If it is not, your server will
    #    not register.
    #
    #    Default: "change_me_logon"
    #
    #  AllowedIPs
    #    This section MUST be completed, otherwise all attempts to link your servers will fail.
    #    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
    #    to make server connections to your logonserver, and register realms.
    #    For example, everything in the 127.0.0.* range would be:
    #         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
    #
    #    To allow a single IP,
    #         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
    #
    #  AllowedModIPs
    #    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
    #    (adding bans, GMs, account permissions, etc)
    #
    
    <LogonServer RemotePassword = "***"
                 AllowedIPs = "127.0.0.0/24"
                 AllowedModIPs = "127.0.0.0/32">

    ascent-realms.conf:
    Code:
    #######################################################################
    # OpenAscent Realms Configuration File
    # Last updated at revision 446 by Burlex
    #######################################################################
    
    /********************************************************************************
     * How to use this config file:                                                 *
     * Config files are in a block->variable->setting format.                       *
     * A < signifies the opening of a block, the block name is expected after that. * 
     * After the block name, a space and then the settings sperated by = / ' '.     *
     *                                                                              *
     * e.g.                                                                         *
     * <block setting="0" someval = "1">                                            *
     *                                                                              *
     * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
     * of the line, or in shell format (#).                                         *
     ********************************************************************************/
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # LogonServer Section
    #
    #    Address:
    #        The address (no port) of the server.
    #
    #    Port:
    #        The port on which the logon server listens. (*** NOT 3724 ***)
    #
    #    Name:
    #        Not really relavant, but name the logon.
    #
    #    RealmCount:
    #        The number of realms in the next section.
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <LogonServer Address = "127.0.0.1"
                 Port = "8093"
                 Name = "Default Logon"
                 RealmCount = "1">
    
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    # Realm Section
    #
    #    Name:
    #        The name of the realm.
    #    
    #    Address:
    #        The address (and port) of that realm.
    #
    #    Icon:
    #        The type of realm (PVP, Normal, RPPVP, RP)
    #
    #    TimeZone:
    #        Time zone the realm is in.
    #
    #    Population:
    #        (0 = low, 1 = medium, 2 = high)
    #
    #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
    
    <Realm1 Name = "Sharalith Funserver"
            Address = "sharalith.game-server.cc:8129"
            Icon = "PVP"
            Population = "1.0"
            TimeZone = "1">
    Thank you for reading
    Last edited by killerweb0; 06-12-2008 at 02:06 PM.

    I am not able to make my server public.
  2. #2
    Power of Illuminati's Avatar Contributor
    Reputation
    179
    Join Date
    May 2008
    Posts
    1,410
    Thanks G/R
    6/2
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Edit the part marked in red to your DNS

    Code:
    <LogonServer Address = "127.0.0.1"
                 Port = "8093"
                 Name = "Default Logon"
                 RealmCount = "1">
    It's prob not all, but what I can see for the second.

  3. #3
    yoyo19's Avatar Member
    Reputation
    1
    Join Date
    Aug 2007
    Posts
    9
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    uhh buddy, how come this is still there?
    # <die msg="I am a newb who didn't even read half my config file!">

    and i have problems getting my server public too, when u find out can u let me know plz?

  4. #4
    Power of Illuminati's Avatar Contributor
    Reputation
    179
    Join Date
    May 2008
    Posts
    1,410
    Thanks G/R
    6/2
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    This sign
    Code:
    #
    means that it's a comment. Nothing on that line will effect the program.

  5. #5
    killerweb0's Avatar Member
    Reputation
    1
    Join Date
    May 2007
    Posts
    25
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by yoyo19 View Post
    uhh buddy, how come this is still there?
    # <die msg="I am a newb who didn't even read half my config file!">

    and i have problems getting my server public too, when u find out can u let me know plz?
    It says you can just comment it so thats what i did. You don't have to delete it but just shell comment it (#)

    Edit: Oops sry didnt see your reply Illuminati.

  6. #6
    ThilaDM's Avatar Member
    Reputation
    7
    Join Date
    Jun 2008
    Posts
    20
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Yeah, Delete Die Directive or Won't work

  7. #7
    Power of Illuminati's Avatar Contributor
    Reputation
    179
    Join Date
    May 2008
    Posts
    1,410
    Thanks G/R
    6/2
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Some guys doesn't get it, if you put # tag infront of the line, you dont need to delete it.

  8. #8
    yoyo19's Avatar Member
    Reputation
    1
    Join Date
    Aug 2007
    Posts
    9
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    ok i understand that now. what is the
    AllowedIPs = "127.0.0.0/24"
    AllowedModIPs = "127.0.0.0/32">

    supposed to look like, or does that not affect it being public?

  9. #9
    killerweb0's Avatar Member
    Reputation
    1
    Join Date
    May 2007
    Posts
    25
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by Power of Illuminati View Post
    Edit the part marked in red to your DNS

    Code:
    <LogonServer Address = "127.0.0.1"
                 Port = "8093"
                 Name = "Default Logon"
                 RealmCount = "1">
    It's prob not all, but what I can see for the second.
    Dammit this didnt work. Instead my ascent-world.exe made a message saying
    Code:
    Authenticating
    Authentication timed out
    Connecting to logonserver on 'sharalith.game-server.cc:8093'
    And it just kept looping Got any other ideas?

  10. #10
    Power of Illuminati's Avatar Contributor
    Reputation
    179
    Join Date
    May 2008
    Posts
    1,410
    Thanks G/R
    6/2
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You said one port wasnt opened? Right.. try to fix to open it.

  11. #11
    killerweb0's Avatar Member
    Reputation
    1
    Join Date
    May 2007
    Posts
    25
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by Power of Illuminati View Post
    You said one port wasnt opened? Right.. try to fix to open it.
    1. My ISP dosn't allow router configuration so i can't do that.
    2. Port 25 is just the SMTP port (Email out) but it is still opened if you have email software like Outlook or Thunderbird.


    Originally Posted by yoyo19
    ok i understand that now. what is the
    AllowedIPs = "127.0.0.0/24"
    AllowedModIPs = "127.0.0.0/32">

    supposed to look like, or does that not affect it being public?
    I think that is only related to OpenAscent and ArcEmu and not Ascent or MaNGOS
    Last edited by killerweb0; 06-12-2008 at 02:47 PM.

  12. #12
    yoyo19's Avatar Member
    Reputation
    1
    Join Date
    Aug 2007
    Posts
    9
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    makes sense, im using open ascent haha

  13. #13
    TheSpidey's Avatar Elite User
    Reputation
    365
    Join Date
    Jan 2008
    Posts
    2,200
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    AllowedIPs are also in Ascent. Refer to my guide about CIDR

  14. #14
    killerweb0's Avatar Member
    Reputation
    1
    Join Date
    May 2007
    Posts
    25
    Thanks G/R
    0/0
    Trade Feedback
    0 (0%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Originally Posted by TheSpidey View Post
    AllowedIPs are also in Ascent. Refer to my guide about CIDR
    Oh okay [--Filler--]

Similar Threads

  1. How To make your Server Public [Hamachi AND Non-Hamachi]
    By JulianX in forum WoW EMU Guides & Tutorials
    Replies: 509
    Last Post: 12-02-2010, 03:41 PM
  2. Replies: 216
    Last Post: 08-08-2008, 11:09 PM
  3. Make your server public without hamachi! (antrix!)
    By jargs in forum WoW EMU Guides & Tutorials
    Replies: 74
    Last Post: 12-02-2007, 10:12 PM
  4. How to make you server public whit hamachi !
    By EmiloZ in forum WoW EMU Guides & Tutorials
    Replies: 32
    Last Post: 12-02-2007, 09:53 AM
  5. How do i make my server public using Hamachi?
    By Hinata_92 in forum World of Warcraft Emulator Servers
    Replies: 2
    Last Post: 09-02-2007, 06:14 PM
All times are GMT -5. The time now is 02:50 AM. Powered by vBulletin® Version 4.2.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved. User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Google Authenticator verification provided by Two-Factor Authentication (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Digital Point modules: Sphinx-based search