-
Member
@Jumperu
Did you try the Mammouth plugin ?
@SidewaysIII
Is it happening for all your bags or only for the pack bag ?
-
Active Member
Originally Posted by
jumperu
80 yards is alot, and if u can't see any mob after the wall, that does not mean it isn't. Bot is pretty automated, so if for example, a flying mob goes by, he targets it, and if that mob flies into a wall and dissapears, the bot will try to follow it forever.
Try to lower the pull distance for the spots, and maybe make a new profile abit further from that wall.
I've been messing around with the bot for a few days now and I've tried many different locations and ways of setting up waypoints, but no matter what I do the bot always bugs out. Sometimes when it's about to loot after killing a mob it starts running off in random directions while the program says "am stuck" over and over, it wont stop running in that direction until I stop then restart the bot.
It's useless like this, I can't leave it running without having to babysit the bot.
-
Originally Posted by
romb0t
@Jumperu
Did you try the Mammouth plugin ?
I only tried it back in the days, when it was posted on the old lb forum. It didn't work then, haven't tried it since.
I've been messing around with the bot for a few days now and I've tried many different locations and ways of setting up waypoints, but no matter what I do the bot always bugs out. Sometimes when it's about to loot after killing a mob it starts running off in random directions while the program says "am stuck" over and over, it wont stop running in that direction until I stop then restart the bot.
It's useless like this, I can't leave it running without having to babysit the bot.
Hehe, there are many reasons the bot can screw up in the new zones. Most of the mobs are in packs, have new spells, etc.
Go to nortshire valley and make a simple 2-3 spots profile...it will run forever.
It depends alot of the zone, the mobs, many thing can influence a bot.
-
Private
Is this guide good to level up an alt? I am level 39 ATM and tired of this.
-
Sergeant
Originally Posted by
jumperu
I
Hehe, there are many reasons the bot can screw up in the new zones. Most of the mobs are in packs, have new spells, etc.
Go to nortshire valley and make a simple 2-3 spots profile...it will run forever.
It depends alot of the zone, the mobs, many thing can influence a bot.
Hi again. To improve the LB community knowledge and let know the developers about where there's room to improvement, we need to click on LOG DEBUG, then analyzing why bot is going crazy. In example, I'm starting creating my own grinding profiles for leveling, since some of them aren't working for me as they should do. I've tried one and my char goes crazy, but taking a look through the log, I can see that he's trying to target critters but, as well as you can't target them by clicking tab (it's the method the bot uses), it goes following them and spamming tab, then stucks, get over-pulled or something like that.
Clicking on LOG DEBUG was the way I discovered the problem reported about spells misnamed on monk behaviors, and the way other people have discovered the problem about talented spells, which doesn't attacht properly with the BOT unless you bind it to keys.
I'll try adding the critters to "ignore" on the profile and, if it works properly, then I'll post it here.
-
Sergeant
First of all, sorry for double-posting. I think it should be so much easy to include Tundra Traveller Mammoth's feature, because, as well as bot includes both press space bar for jumping and another key-spam on flying profile, a press key option could be added to ground mount settings. You could then macro the interact with the tundra vendor. I think it could be so much easy.
-
Active Member
Originally Posted by
SidewaysIII
My LB just today is having trouble mailing items to my mailing character? opens up mailbox types the name and starts going over every item and skips over them. Worked before, Checked my mail to items and they are the same.
had same problem once, just rebooting computer resolved that
-
Originally Posted by
EUROBOT
First of all, sorry for double-posting. I think it should be so much easy to include Tundra Traveller Mammoth's feature, because, as well as bot includes both press space bar for jumping and another key-spam on flying profile, a press key option could be added to ground mount settings. You could then macro the interact with the tundra vendor. I think it could be so much easy.
Ok, i just checked to see if the old tundra plugin works (shame on me i did not try it before), and after a while i found out that it works only with a catch 
Mammoth must be on bar 1 key 1, no matter what u set in the plugin, bot will always try (when it's full) to cast bar 1 key 1, so put ur mammoth there and it will work.
It will only work with Tundra Traveller Mammoth or Jeeves, it will not work with the new mop mammoth since the vendor names, Gnimo and Jeeves are coded in the plugin.
So in ur Lazybot folder, inside Plugins folder unzip the 2 files i linked below: TundraMountSell.dll & TundraMountSell.keys
One other thing, if u see the bags are full and you stop the bot, when you start it again he will go to the vendor set in the profile, but if you get into combat, then start the bot, and when he loots he discovers bags are full, he will mount the mammoth, so he needs to loot something to find out the bags are full
Plugins.7z
Unfortunately, idk who gets the credits for creating this plugin, i don't remember his name, it was a guy from the old LazyBot forums, but wherever he is, he gets all our thanks 
@romb0t
My bad, did not try it before i said it didn't work 
Code:
[17:29:25] SendKey: InteractTarget Bar: Indifferent Key: P
[17:29:28] GetSkinnableType = None
[17:29:28] Free bagslots: 29 Minimum: 30
[17:29:28] Try to sell...
[17:29:29] Paused bot
[17:29:30] SendKey: RMount Bar: 1 Key: 1
[17:29:37] SendKey: InteractTarget Bar: Indifferent Key: P
[17:29:38] [Vendor]Going to sell items
[17:29:38] 4863887612667039582
[17:29:38] 4863887612699763835
Originally Posted by
FrozenlandPT
Is this guide good to level up an alt? I am level 39 ATM and tired of this.
Yes you can use Lazybot for grinding and it will work very good if u set it up correctly, though it's pretty hard to bot with the new CRZ shit from blizz.
(
Last edited by jumperu; 11-05-2012 at 10:56 AM.
:gusta:wow:gusta:
-
Post Thanks / Like - 1 Thanks
DefaultCore (1 members gave Thanks to jumperu for this useful post)
-
Private
how do i attach such a profiles like herbalism in the jade forest (86-89 - LINK Jade Forest + vendor - by ragehunter) to a bot ? i dont understand what do i do with a file after downloading it . I've tried to copy the file with a profile and paste it to lazybot_evolution file and then load the profile but it doesnt find anything . please explain , sorry for bad english .
-
Originally Posted by
Sealion95
how do i attach such a profiles like herbalism in the jade forest (86-89 - LINK Jade Forest + vendor - by ragehunter) to a bot ? i dont understand what do i do with a file after downloading it . I've tried to copy the file with a profile and paste it to lazybot_evolution file and then load the profile but it doesnt find anything . please explain , sorry for bad english .
You take the file, save it anywhere on your comp.
Start the bot, make the necesarry settings (choose flying engine, set the mount key in engine settings, set avoid elites, set periodic login, etc..)
Go to profile settings and load the file you saved.
Go to combat settings and load a behavior for your char...behavior is a set of rules of how bot will cast spells.. (you save behaviors from the first post and you put them in folder Lazybot/Behaviors)
The first time you start the bot, tick log debug, and it will show you in red if something is wrong, like spells missing from bars, keys not set properly, etc.....if everything is ok, you can untick it.
And that's it...happy botting.
-
Private
You didn't understand I see. That's what im doing -> I download a file , save it on a desktop , launch lazybot_evolution , open Profile settings tab -load , searching for the place i've saved the file ( desktop) and there is nothing ... tried multiple times to download the same profile and many others and it still doesnt find it . can you help me please ?
-
Originally Posted by
Sealion95
You didn't understand I see. That's what im doing -> I download a file , save it on a desktop , launch lazybot_evolution , open Profile settings tab -load , searching for the place i've saved the file ( desktop) and there is nothing ... tried multiple times to download the same profile and many others and it still doesnt find it . can you help me please ?
If the file you are saving is not something like ... jadefire+mine+vendor.xml .... then you are not downloading it correctly. Change your browser.
-
Private
Okay nevermind i think i've downloaded it correctly now . I've also read the manual and setup up the general options . There is another problem , lazybot says : Could not load the behavior, please select a different one. what is that supposed to mean ?
-
Originally Posted by
Sealion95
Okay nevermind i think i've downloaded it correctly now . I've also read the manual and setup up the general options . There is another problem , lazybot says : Could not load the behavior, please select a different one. what is that supposed to mean ?
Cmon m8, i just answered this question in the post before:
"
Go to combat settings and load a behavior for your char...behavior is a set of rules of how bot will cast spells.. (you save behaviors from the first post and you put them in folder Lazybot/Behaviors)
The first time you start the bot, tick log debug, and it will show you in red if something is wrong, like spells missing from bars, keys not set properly, etc.....if everything is ok, you can untick it."
I'm doing an effort to write all of this to help you, least you can do is read it and not ask the same thing again.
-
Private
im sorry , im tired of this monday already . thanks for the help though