LAZYBOT support thread, Q&A, requests and updates

[jumperu]

any idea of how to gather not using flying mount?

http://www.ownedcore.com/forums/worl...ml#post2514849 (LazyBot for WoW 5.0.5)

[spsoldier]

hello
in MOP there is the ability of accepting the next killing quest without going back to the vendor, but it needs a click in a windows
i hope that lazybot will be able to click it

[rknights]

http://www.ownedcore.com/forums/worl...ml#post2514849 (LazyBot for WoW 5.0.5)

Tried that.. I also tried to use the grinding engine to see if it works.. but sadly it runs about and not gathering.. The Z modifier was tested too.. not working with ground mount..

[jumperu]

Sharing a warrior behavior for the new spells, it's based on fury, has dragon roar from talents, u can see the spells rotation below:

[00:27:16] SendKey: Dragon Roar Bar: 1 Key: 5
[00:27:18] SendKey: Bloodthirst Bar: 1 Key: 4
[00:27:19] SendKey: Enraged Regeneration Bar: 6 Key: 8
[00:27:21] SendKey: Heroic Strike Bar: 1 Key: 1
[00:27:22] SendKey: Berserker Rage Bar: 4 Key: 6
[00:27:24] SendKey: Bloodthirst Bar: 1 Key: 4
[00:27:25] SendKey: Heroic Strike Bar: 1 Key: 1
[00:27:26] SendKey: Colossus Smash Bar: 1 Key: 7
[00:27:28] SendKey: Bloodthirst Bar: 1 Key: 4
[00:27:30] SendKey: Heroic Strike Bar: 1 Key: 1
[00:27:33] SendKey: Heroic Strike Bar: 1 Key: 1
[00:27:34] SendKey: Bloodthirst Bar: 1 Key: 4
[00:27:36] SendKey: Pummel Bar: 4 Key: 7
[00:27:37] SendKey: Heroic Strike Bar: 1 Key: 1
[00:27:39] SendKey: Bloodthirst Bar: 1 Key: 4
[00:27:40] SendKey: Heroic Strike Bar: 1 Key: 1

Pre pull is heroic throw or charge, buff is battle shout. It is based on the old Nih's fury warrior behavior so i didn't changed the name of the file (main credit to Nih from the old LB forum, very very good behavior back in the old days, i removed the stance changes since it is no longer needed to change stance to use other spells)

LINK

Talents: http://www.wowhead.com/talent#wF6|Vzis

Also sharing a profile i made in this zone, MAP (it's down in the south, as you look at the mop map), it's pretty remote, on the beach, packs of 1-3 lvl 86-87 humanoids, easy grind with warr lvl 85 old gear, but watch out for other players.

LINK

[Jaladhjin]

Sooo I can't stop my character from attacking nearby enemy factioned players..I've got stop harvesting if player around checked..I've tried with units @ node set to 0..& it seems like a lot of what's getting me killed & not mining anymore :-/

I tried checking Druid Avoid Combat just to see if it'd apply anyway..sure didn't..

Tried starting without a combat profile..that didn't work out well :-/

Any advice? :-)

[Jaladhjin]

There is a video guide by him on page 1 post 1 :-P

[kirkdabirk]

Does this work for a pandaren Monk?

Here´s the error I get

Message: Unknown class
Inner exception:
Source: LazyLib
Stack trace: vid LazyLib.Wow.PUnit.get_UnitClass()
vid LazyLib.ActionBar.BarMapper.MapBars()
vid LazyEvo.Forms.Main.StartBotting()
vid LazyEvo.Forms.Main.StartStopBotting()
vid LazyEvo.Forms.Main.StartEngineClick(Object sender, EventArgs e)
vid System.Windows.Forms.Control.OnClick(EventArgs e)
vid DevComponents.DotNetBar.ButtonX.OnClick(EventArgs e)
vid DevComponents.DotNetBar.ButtonX.OnMouseUp(MouseEventArgs e)
vid System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
vid System.Windows.Forms.Control.WndProc(Message& m)
vid DevComponents.DotNetBar.PopupItemControl.WndProc(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
vid System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Target site: UnitClass get_UnitClass()
Data: System.Collections.ListDictionaryInternal
Link:

[kris30000]

Hello, I'm having a problem in that when I run LazyBot, it doesn't find my character to attach to. I try clicking the 64-bit box, but I can't click it and check it. I am running both wow and lazybot as an admin. Anyone know the fix for this? I cans till attach to no one and load profiles etc, but I can't seem to get it to find my character. Also, if I need to run wow in 32-bit mode, how do i do that?

-Thanks

[TheShadowhand]

I'm wondering one if someone can possibly make a level 85 sub rogue behavior. Tried making me own and I completely mucked it up. Also if anyone has a profile to kill Grimtotem Breakers and Grimtotem Spirit-Shifters and Grimtotem Elders at Blackhoof Village in Dustwallow Marsh, that would would be badass. Need a buttload of silk and AH has none.

[jumperu]

Does this work for a pandaren Monk?

Here´s the error I get

Message: Unknown class
Inner exception:
Source: LazyLib
Stack trace: vid LazyLib.Wow.PUnit.get_UnitClass()
vid LazyLib.ActionBar.BarMapper.MapBars()
vid LazyEvo.Forms.Main.StartBotting()
vid LazyEvo.Forms.Main.StartStopBotting()
vid LazyEvo.Forms.Main.StartEngineClick(Object sender, EventArgs e)
vid System.Windows.Forms.Control.OnClick(EventArgs e)
vid DevComponents.DotNetBar.ButtonX.OnClick(EventArgs e)
vid DevComponents.DotNetBar.ButtonX.OnMouseUp(MouseEventArgs e)
vid System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
vid System.Windows.Forms.Control.WndProc(Message& m)
vid DevComponents.DotNetBar.PopupItemControl.WndProc(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
vid System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Target site: UnitClass get_UnitClass()
Data: System.Collections.ListDictionaryInternal
Link:

I don't think it recognizes monk spells/bars/auras....etc

Hello, I'm having a problem in that when I run LazyBot, it doesn't find my character to attach to. I try clicking the 64-bit box, but I can't click it and check it. I am running both wow and lazybot as an admin. Anyone know the fix for this? I cans till attach to no one and load profiles etc, but I can't seem to get it to find my character. Also, if I need to run wow in 32-bit mode, how do i do that?

-Thanks

From the launcher, options, run the game in 32bit- thats prolly the problem

I'm wondering one if someone can possibly make a level 85 sub rogue behavior. Tried making me own and I completely mucked it up. Also if anyone has a profile to kill Grimtotem Breakers and Grimtotem Spirit-Shifters and Grimtotem Elders at Blackhoof Village in Dustwallow Marsh, that would would be badass. Need a buttload of silk and AH has none.

Take the sub rogue behavior from the first post, it is for the old spells, delete the old ones and add new ones, it's easier than starting over from scratch. Also making a profile is pretty simple so get on it. Try it and If you still need help post again
I would have made a vid about how to setup lb and the grinding engine but my voice isn't great.

[TheShadowhand]

Take the sub rogue behavior from the first post, it is for the old spells, delete the old ones and add new ones, it's easier than starting over from scratch. Also making a profile is pretty simple so get on it. Try it and If you still need help post again
I would have made a vid about how to setup lb and the grinding engine but my voice isn't great.

The behavior from the first post (in the Behaviors.7z file) is level 40 and is combat not sub and since the manual doesn't show how to make a behavior I have honestly no clue how to make one from scratch. About the making a vid on how to set up lb and the grinding engine. Honestly I would be fine with just a video with text. It's better then nothing lol ^_^

[jumperu]

Free Cloud Storage - MediaFire

There u go, simple subtelity rogue behavior.

How to make a grind profile:

1. New profile
2. got to subprofile and hit add ... name does not matter, don't modify anything in the level ranges
3. still at the subprofile tab, go ingame and target a mob in the area you wanna make the profile, then got to the bot and hit the + next to factions, do that for any class of mobs in the area (humans, beasts, etc)
4. hit + next to Spots
5. tick follow spots in order, then go back to general tab
6. if the area is large and the mobs are far away from eachother, you select vertice type "ground mount" and record the profile with ground mount, this way the char will walk abit after a kill and if there is no mob near he will mount and go on until he encounters the next mob then dismount, kill, rinse and repeat - ground mount vertices will appear as white dots on the graph window of the bot (if area is small choose normal vertices-red dots)
7. tick "top most" and "record vertices"
8. drag the profile maker to the side and maximize the game so you can see both where you are going and the graph of the profile - the path you are creating
9. start walking ingame, when you get to a mob hit "add spot"
10. walk to the next mob - pack of mobs and hit "add spot" again
11. spots usually are on the path, but it can be slightly off with no problem, bot will go there ---- a spot tells the bot where to go to find fresh mobs to kill- that's why we tick "follow spots in order" so the mobs can respawn and the bot won't return too soon to a recently visited spot, so u can have spots that are not on the path but be carefull where you put them so there are no obstacles between the spot and the path so your char don't get stuck on the return to path
12. the path you are making can be a straight line, curved line, circle or any shape you want (if it's a line, the bot will go back the same way he came at the end)

13. if you want to record a path for the bot from the GY to the grinding zone if you want to ress you can... just untick "record vertices" go and die, now you are at the graveyard... choose vertice type "ground mount" (normal verices don't work for gy path idk why), and hit record again, an go to the zone you recorded your profile - do not add any spots on this path -, untick record vertices

14. if you have a town nearby the grinding zone you can record a path to the town so when the bot has full bags and in general setting the "to town when fulll bags" is ticked he will go there are sell/repair. Be on your recorded path, choose "ground mount" vertices" and hit record again, go to town, be carefull to avoid obstacles, i suggest before you hit record to reduce the vertice distance to 10 or 5, so if you make a sudden curve the bot will follow exactly. when you get to town, go to the vendor you wanna use and in subprofile tab, hit + next to "vendor count", untick record vertices

15. save your profile naming something like "dustwallow marsh - blackhoof village - humanoids grind lvl 40 - silk farm" for example

i hope i was clear, if you don't understand a point tell me and i'll explain more
i will refine abit this "small guide" and post it in the first post also
if any1 has something to add that i omitted please tell me

happy botting.

[TheShadowhand]

Free Cloud Storage - MediaFire

There u go, simple subtelity rogue behavior.

That's funny. That's the one I tried to use before I tried to make my own and it doesn't recognized half of the rogue abilities as on any actionbars when I have no addons enabled and I make sure they are on the actionbars lol Also I have it working but for some weird reason it isn't actually targeting the mobs that I put in there. It just runs the route even though I followed all the instructions. The only time it attacks anything is if the mobs attacks it first.

[katsas]

i have an issue the bot doesnt not collect anything and i have triple checked the settings.

[Senio]

Are there any mining/herbalism profiles for Mop zones avaliable? I am ok with behaviuor, but I could definitely use some gathering profiles ( with flying mount ofc). I do not even know which zones will be richest etc and best for mining or herb?

So if anyone knows or has any profile and wants to share it - it wil be very welcome Ty.