LAZYBOT support thread, Q&A, requests and updates

[Testin]

Im using the Prentiss Combat Rogue 4.1.0 i found in this forum (I have also tried the Subtetly 4.2 profile that is availabe in this forum, with similar combo points and poison application issues). If you have any working rogue profiles romb0t id be very happy to take and use them.

[nitesslayer]

here ya go combat rog i do have a clicky in the buff part that want work for you but it will still run

[dawawe]

I have tried every single possible Rule/Condition combination to do Eviscerate/Recuperate(over 0, less or equal to 1, over 1, less than 5, exactly 5, exactly 4) but the program just seem to "refuses" to do it. Same thing applies to poison, it keeps trying to overwrite my existing poisons, even though i have a condition to check if there are no temporary enchants

i had the same problem posted in like page 2 of this topic. Nobody really helped, never got it to work. i just made my own profile and set HP conditions instead of combo points. Like recup if i was less then 80% and didnt have the buff. or evis if the target was less than 35%

[romb0t]

@Testin, dawawe
Won't be able to test before tomorrow at this stage

@nitesslayer
Will see with your profile bubt I have created a dummy one just to test the poison and the combo points.

[nitesslayer]

Ok I read every post.To make sure this has not come up already. And do not be leave I see anything. So here is what going on. I load lazy bot attach my toon. then pick Grinding Engine I get this. If anyone could give me a hint on whats not on target be uber cool thank you peeps.

[8:29:08 AM] [ECompiler] Loaded: Diggy 
[8:29:08 AM] [ECompiler] Loaded: LFishingEngine 
[8:29:08 AM] Could not load a valid grinding profile 
[8:29:08 AM] Visit www.mmo-lazybot.com for support. 
[8:29:08 AM] LazyBot is free and open source software! 
[8:29:08 AM] http://www.assembla.com/spaces/lazybot/wiki 
[8:29:08 AM] Keys should be placed on bar 1-6 and position 1-9! 
[8:29:08 AM] Attached 
 
Message: Font 'Verdana' does not support style 'Regular'. 
Inner exception:  
Source: System.Drawing 
Stack trace:    at System.Drawing.Font.CreateNativeFont() 
   at System.Drawing.Font.Initialize(FontFamily family, Single emSize, FontStyle style, GraphicsUnit unit, Byte gdiCharSet, Boolean gdiVerticalFont) 
   at System.Drawing.Font.Initialize(String familyName, Single emSize, FontStyle style, GraphicsUnit unit, Byte gdiCharSet, Boolean gdiVerticalFont) 
   at System.Drawing.Font..ctor(String familyName, Single emSize) 
   at LazyEvo.LGrindEngine.PathControl.MapControlLoad(Object sender, EventArgs e) in D:\bot\source\LazyBot evolution\Lazy Evolution\LGrindEngine\PathControl.cs:line 193 
   at System.Windows.Forms.Form.OnLoad(EventArgs e) 
   at DevComponents.DotNetBar.Office2007RibbonForm.OnLoad(EventArgs e) 
   at System.Windows.Forms.Form.OnCreateControl() 
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) 
   at System.Windows.Forms.Control.CreateControl() 
   at System.Windows.Forms.Control.WmShowWindow(Message& m) 
   at System.Windows.Forms.Control.WndProc(Message& m) 
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m) 
   at System.Windows.Forms.ContainerControl.WndProc(Message& m) 
   at System.Windows.Forms.Form.WmShowWindow(Message& m) 
   at System.Windows.Forms.Form.WndProc(Message& m) 
   at DevComponents.DotNetBar.Office2007RibbonForm.WndProc(Message& m) 
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) 
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) 
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) 
Target site: Void CreateNativeFont() 
Data: System.Collections.ListDictionaryInternal 
Link:  

[jumperu]

as far as i can tell, it's a windows problem, possible answer here Font 'Tahoma' does not support style 'Regular - Microsoft Answers

I suggest delete the font that is causing the error, or install it again, wichever works.

[nitesslayer]

Ok I did what you suggested and it still doing it. I tried to run it on my laptop and i get the same this. I am not sure but am i running a 32bit version because both my pc are win7 64 bit.

[romb0t]

@Testin, dawawe
I have tested the combo point condition and it works well...

What I have done is to create a test profile with:
- In the Combat tab:
Create a rule: less than 4, hit the key 2,1 (corresponding to Sinister Strike)
Create a rule: equal to 4, hit the key 2,2 (corresponding to Revealing Strike)
Create a rule: more than 4, hit the key 2,4 (corresponding to Eviscerate)
- In the Buff tab:
Create a rule: No poison, hit 2,5 (corresponding to a macro applying a poison to my MH)

I then went to the Training Dummy and hit the Start attack Training Dummy button in the debug tab
=> I can see the 4 sinister strike then the revealing strike and the Eviscerate....

Then when I hit the Stop attack Training Dummy button, I can see the poison being applied.

I reapeat the steps and I don't see the poison being applied again.

[Testin]

@romb0t
it still does not work for me, i didnt test it via debug on a dummy, but rather watched combat engine while grinding ores

@nitesslayer
i get the following message everytime i get in combat using your profile;

Error checking buff: System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at LazyEvo.PVEBehavior.Behavior.Conditions.BuffCondition.HasBuffId(PUnit target, String buffIds) in D:\bot\source\LazyBot evolution\Lazy Evolution\PVEBehavior\Behavior\Conditions\BuffCondition.cs:line 327

[romb0t]

@Testin,
Could then you share your profile even in PM if you don't want to have it public ?

[Testin]

Ill upload it here (this is the "untouched" version that was not working before or after the changes)

[dawawe]

@Testin, dawawe
I have tested the combo point condition and it works well...

What I have done is to create a test profile with:
- In the Combat tab:
Create a rule: less than 4, hit the key 2,1 (corresponding to Sinister Strike)
Create a rule: equal to 4, hit the key 2,2 (corresponding to Revealing Strike)
Create a rule: more than 4, hit the key 2,4 (corresponding to Eviscerate)
- In the Buff tab:
Create a rule: No poison, hit 2,5 (corresponding to a macro applying a poison to my MH)

I then went to the Training Dummy and hit the Start attack Training Dummy button in the debug tab
=> I can see the 4 sinister strike then the revealing strike and the Eviscerate....

Then when I hit the Stop attack Training Dummy button, I can see the poison being applied.

I reapeat the steps and I don't see the poison being applied again.

I tried it using the same profile as testin. I have the combo point problem not the poisons. this is what i get when attacking a target dummy.

[9:27:09 AM] Started combat engine
[9:27:09 AM] Pulling: Training Dummy 17379591309362226749
[9:27:09 AM] SendKey: InteractTarget Bar: Indifferent Key: U
[9:27:09 AM] SendKey: Sprint Bar: 6 Key: 7
[9:27:11 AM] Pull result: Success
[9:27:11 AM] SendKey: InteractTarget Bar: Indifferent Key: U
[9:27:11 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:13 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:15 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:17 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:19 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:21 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:23 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:25 AM] SendKey: Killing Spree Bar: 1 Key: 5
[9:27:27 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:29 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:31 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:33 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:35 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:37 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:39 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:41 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:43 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:46 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:48 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:50 AM] SendKey: Sinister Strike Bar: 1 Key: 3
[9:27:52 AM] SendKey: Sinister Strike Bar: 1 Key: 3

I have also tried this profile i get the same results. This was the one recommended in my 1st post.Simple Subtlety Rogue (4.2) by Fender.xmlSimple Subtlety Rogue (4.2) by Fender.xml

[9:35:05 AM] Pulling: Training Dummy 17379591309362226749
[9:35:05 AM] SendKey: Premeditation Bar: 1 Key: 1
[9:35:07 AM] SendKey: Shadowstep Bar: 6 Key: 5
[9:35:08 AM] Pull result: Success
[9:35:08 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:09 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:10 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:11 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:12 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:14 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:17 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:18 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:23 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:24 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:27 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:29 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:31 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:33 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:35 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:39 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:40 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:43 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:45 AM] SendKey: Hemorrhage Bar: 1 Key: 3
[9:35:47 AM] SendKey: Hemorrhage Bar: 1 Key: 3

[jumperu]

Check this:

I reccomend at classes with 2 bars (warriors - 3bars one for each stance, droods, rogues), not to use the 1st bar, cause it will change and the bot only remembers 1 bar (or you can put the same spells on both bars like.... unstealthed rogue bar 1 key 1 - Sinister strike, stealthed rogue bar 1 key 1 - sinister strike - that will work)
Put your spells on bar 1-6 key 1-9 (not 10,11,12)

[romb0t]

@Testin, Dawawe
I have tested the profile from Testin. What I have done is looked at each rules to ensure that the keys are correctly set-up (at least for the eat and poisons) and so I save the profile with my changes.
Then I went to a training dummy and do a test, Here the output:

[16:02:53] Started combat engine
[16:02:53] Pulling: Mannequin d'entraînement 17379591309362204853
[16:02:53] SendKey: InteractTarget Bar: Indifferent Key: P
[16:02:53] Pull result: Success
[16:02:53] SendKey: InteractTarget Bar: Indifferent Key: P
[16:02:53] SendKey: Killing Spree Bar: 6 Key: 5
[16:02:58] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:02] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:04] SendKey: Slice and Dice Bar: 1 Key: 2
[16:03:08] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:11] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:15] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:19] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:23] SendKey: Revealing Strike Bar: 1 Key: 3
[16:03:27] SendKey: Rupture Bar: 1 Key: 5
[16:03:28] SendKey: Slice and Dice Bar: 1 Key: 2
[16:03:32] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:36] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:40] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:43] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:47] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:51] SendKey: Sinister Strike Bar: 1 Key: 1
[16:03:53] SendKey: Slice and Dice Bar: 1 Key: 2
[16:03:57] SendKey: Sinister Strike Bar: 1 Key: 1

As you can see the Slice and Dice, Rupture are correctly applied meaning that the combo is working.

Note that I did not start the combat in stealth mode.

From this, I cannot give you more help without being able to reproduce.

[dawawe]

Check this:

tried this. also didnt fix it. on another note they arent working a druids either. just gonna say its something wrong with our clients or something. Im going to redownload the bot and try again