LAZYBOT support thread, Q&A, requests and updates

[dawawe]

profile settings - delete the seller name -> this way it wont go to vendor

BUt i still need it to vendor spirits and repair so it doesnt get stuck in 'to town' mode after running a long time . Im pretty sure its because the vendor i use pats and their is no mailbox by the other one that can repair in the zone. Can i set up 2 towns on the same profile?

[jumperu]

BUt i still need it to vendor spirits and repair so it doesnt get stuck in 'to town' mode after running a long time . Im pretty sure its because the vendor i use pats and their is no mailbox by the other one that can repair in the zone. Can i set up 2 towns on the same profile?

Ofc u can. U can set up 10 paths ...u can setup a path to the next zone also..like if u bot in Vot4w and there is no vendor near mail there...make a to-town that goes all the way to Krasarang or Dead waiste, it won't spend that long going there (first delete the one u have - profile settings - delete totown path&vendor name)

Also i was bored so i made a Holy pala Behavior for grinding ..my ilvl 520 toon can take 4-5 lvl 90 mobs (600khp each) with ease..
some problems with WoG since we can't detect holy power, but it will cast now and then for extra dmg

here is a normal combat sequence:

[17:23:47] [Unit]TargetingH: Sunreaver Magus
[17:23:47] SendKey: InteractWithMouseOver Bar: Indifferent Key: U
[17:23:48] SendKey: InteractWithMouseOver Bar: Indifferent Key: U
[17:23:49] SendKey: Flash of Light Bar: 6 Key: 3
[17:23:50] SendKey: InteractTarget Bar: Indifferent Key: P
[17:23:50] SendKey: Denounce Bar: 4 Key: 8
[17:23:52] SendKey: Judgment Bar: 1 Key: 1
[17:23:53] SendKey: Holy Shock Bar: 3 Key: 5
[17:23:55] Pull result: Success
[17:23:55] SendKey: InteractTarget Bar: Indifferent Key: P
[17:23:55] SendKey: Holy Prism Bar: 4 Key: 6
[17:23:56] SendKey: Word of Glory Bar: 1 Key: 4
[17:23:58] SendKey: Rebuke Bar: 4 Key: 5
[17:23:59] SendKey: Judgment Bar: 1 Key: 1
[17:24:00] SendKey: Holy Shock Bar: 3 Key: 5
[17:24:02] Combat done, result : Success
[17:24:02] State changed: Pull
[17:24:02] Started combat engine
[17:24:02] Got into combat with: Silvermoon Spellbreaker
[17:24:02] [Unit]TargetingH: Silvermoon Spellbreaker
[17:24:03] SendKey: InteractWithMouseOver Bar: Indifferent Key: U
[17:24:03] SendKey: InteractTarget Bar: Indifferent Key: P
[17:24:03] SendKey: Hammer of Justice Bar: 1 Key: 3
[17:24:05] SendKey: Word of Glory Bar: 1 Key: 4
[17:24:06] SendKey: Judgment Bar: 1 Key: 1
[17:24:08] SendKey: Holy Shock Bar: 3 Key: 5
[17:24:09] SendKey: Word of Glory Bar: 1 Key: 4
[17:24:11] SendKey: Divine Protection Bar: 6 Key: 7
[17:24:12] SendKey: Word of Glory Bar: 1 Key: 4
[17:24:13] SendKey: Judgment Bar: 1 Key: 1
[17:24:15] SendKey: Holy Shock Bar: 3 Key: 5
[17:24:16] SendKey: Holy Prism Bar: 4 Key: 6
[17:24:18] SendKey: Hammer of Wrath Bar: 1 Key: 5
[17:24:19] SendKey: Rebuke Bar: 4 Key: 5
[17:24:20] SendKey: Judgment Bar: 1 Key: 1
[17:24:22] Combat done, result : Success
[17:24:22] SendKey: TargetLastTarget Bar: Indifferent Key: G
[17:24:23] Looting: Silvermoon Spellbreaker
[17:24:23] SendKey: InteractTarget Bar: Indifferent Key: P
[17:24:25] State changed: Loot
[17:24:25] Looting: Silvermoon Spellbreaker

Talents&glyphs: http://www.wowhead.com/talent#l!FE|fcG
The behavior: http://www.mediafire.com/download/ya...by+jumperu.xml

[fraulman]

I am seeing the same error that rewtgr asked about but haven't seen a response so I thought I would post and request an answer to the issue of anyone knows it.

Thanks!

When i try to load diggy engine in any char i got this error (it used to work normally for some time)

Message: Unexpected end of file has occurred. The following elements are not closed: html, html. Line 61, position 1.
Inner exception:
Source: System.Xml
Stack trace: at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.Throw(Int32 pos, String res, String arg)
at System.Xml.XmlTextReaderImpl.ThrowUnclosedElements()
at System.Xml.XmlTextReaderImpl.ParseElementContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlTextReader.Read()
at Diggy.Stuff.Updater.Check()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Target site: Void Throw(System.Exception)
Data: System.Collections.ListDictionaryInternal
Link:

This is an error that closes lazybot.

Any advices? Thanks in advance

[charles420]

I can't tell u about diggy outher then are u using latest version of lb and or diggy / don't use profiles it comes with there their for examples to make your own profiles they are broken haven't used lb in a month or 2 now / no game time to test even ATM / if errors still there when I get back from vaction on the 12 I'm getting game time then cuz last I know it was all working for me i botted panda land for a week with it

[fraulman]

Thanks, Charles. I've been using LB to fly for mining/herbs so I know my LB is working. Can you point me to the latest Diggy version? Also, you happen to know where the " Diggy.Stuff.Updater.Check()" is coming from and is it something that I can disable?

[charles420]

it shouldent be asking to update i disabled that so i don't think u have latest version !!

[fraulman]

Thanks, Charles but that didn't help. It gives the same error. I even deleted all Diggy.dll and verified it didn't show up. Then I copied in your linked Diggy.dll and get the same error. Is there any additional debug I can provide? Let me know how and I'll be happy to get it to you. FYI in the engine menu it shows "Diggy v 5.4.2". Is that the right version?

[charles420]

ya that's right version

[charles420]

Diggy is now working again
new link to download Diggy
ended up buying game time before my vac to test !!

[fraulman]

Charles... The latest one you posted gets around that updater error that was plaguing me. I can now use Diggy on at least Eastern Kingoms and Northrend. However, when I try to use it in Pandaria I get:

[9:31:00 PM] [Engine] Exception System.NullReferenceException: Object reference not set to an instance of an object.
at LazyLib.Wow.Location.DistanceFromXY(Location pos)
at LazyEvo.LGrindEngine.QuickGraph.GetClosest(Location loc) in c:\Users\Charles\Documents\Release\Lazy Evolution\LGrindEngine\QuickGraph.cs:line 155
at Diggy.Functions.Functions.GetPathTo(QuickGraph Graph, Location _end)
at Diggy.States.MovingToDigSite.DoWork()
at LazyLib.FSM.Engine.Run()

Any idea what's going on? Not sure if it's part of the problem, but It seems to be referencing a c:\users\charles\ directory?

[charles420]

U got to make a profile / define each site in dig sites

[shahharsh2010]

Request for next version of LB
Any option for fast herb gathering withForager's Gloves - Item - World of Warcraft
And Sky Golem - Item - World of Warcraft herb farming without dismount for non druid people it would make herring faster!

I am working on Mufti Zone Farming with vendor support profile as soon as I am done will post for fellow LB friends

[yaboy89]

anyone who has a rotation for resto?

[GamerKingFaiz]

Sharing a Townlong Steppes Mining profile, i made it after this POST (How to farm endless stacks of Ghost Iron/Trillium) , i'm currently getting 140-170 harvests/hour with Max Units at node: 0 (i strongly suggest this, i have a dk tank and still mobs there are killing me)

Longying Outpost +vendor+mail v2.xml

I was wondering how exactly the vendor + mail part of this path works. Do you have to set something else up in the bot? How does it who to mail the stuff to? And what exactly is it going to be vendoring?

EDIT: I tried running the profile and it doesn't seem to be mailing correctly. It'll open the mailbox and type in the recipient's name, but it seems to close the bags before it starts to search them for the item to send. Is this a problem with the bot in conjunction with the Bagnon addon?

EDIT 2: Something else I notice is that the bot think bags are full when they are not.

[jumperu]

I was wondering how exactly the vendor + mail part of this path works. Do you have to set something else up in the bot? How does it who to mail the stuff to? And what exactly is it going to be vendoring?

EDIT: I tried running the profile and it doesn't seem to be mailing correctly. It'll open the mailbox and type in the recipient's name, but it seems to close the bags before it starts to search them for the item to send. Is this a problem with the bot in conjunction with the Bagnon addon?

EDIT 2: Something else I notice is that the bot think bags are full when they are not.

Well, you have to set it up so it mails...write the exact name of the items u want it to mail in general options-mail. And, as it is written in the 1st post with big letters, don't use addons with the bot, especially bag addons!
And for the full bag detection, check general options - min free bag options.
As for what it will vendor, general options-vendor - in the left depends what u tick in the left. @right side are protected items that wont be vendored.