LAZYBOT support thread, Q&A, requests and updates

[jumperu]

Hey thanks! I appreciate it even though you don't direct support emu servers. Once I get the extra money ill use the latest one when i renew my retail account. and one question. Is there any plugin or anything that can make it so LB does archaeology?

Thanks - M3dik

Maybe some1 with some programming knowledge can take a look at this engine, as far as i know it gives an error after 1 survey.
It is a separate engine so, here is how u set it up:

From the zip,
- the FILES from the diggy folder must be put in Lazyevo\Engines
- the FILES fron the archeology folder must be put in Lazyevo\Profiles\Archaeology
*make the folder if u don't have them
From the main Lazybot window, from the drop-down menu choose diggy engine, select the continent u want and start it up.
*it used to work only if u had survey spell on key 1 (if it does not do anything, try this)
Required addons in wow TOM-TOM and ARCHY , also included in the zip, idk if u need an earlier version or a new one


LINK

Btw, pay ur wow game time with gold, no point spending all that $$ just to fatten those blizz corporate's asses

[lingua]

Link ur behavior and i will take a look.

There you go
muj DK.xml download - 2shared

[jumperu]

There you go
muj DK.xml download - 2shared

That is not a behavior. U have no rules for any spells except ticker 0, wich means that the first spell will always cast because it will always meet that condition. So bot will try to cast death grip over and over again.
I could not open v.3.3.5 u cannot open it without a wow to attach to, unlike v4 + (so i took a look at the behavior into a v4.0 lb)
Try one of these behaviors LINK , i have them from v 4.0, they should work fine, or atleast they should give u a clue on how a behavior is made.

[lingua]

ok, thanks for help, i made it same way how I made my paladin profile which worked perfectly, thats why I was confused

edit: I made another behaviour using one of yours as template and now its working flawlessly, Thanks again

[m3dik]

Maybe some1 with some programming knowledge can take a look at this engine, as far as i know it gives an error after 1 survey.
It is a separate engine so, here is how u set it up:

From the zip,
- the FILES from the diggy folder must be put in Lazyevo\Engines
- the FILES fron the archeology folder must be put in Lazyevo\Profiles\Archaeology
*make the folder if u don't have them
From the main Lazybot window, from the drop-down menu choose diggy engine, select the continent u want and start it up.
*it used to work only if u had survey spell on key 1 (if it does not do anything, try this)
Required addons in wow TOM-TOM and ARCHY , also included in the zip, idk if u need an earlier version or a new one


LINK

Btw, pay ur wow game time with gold, no point spending all that $$ just to fatten those blizz corporate's asses

Thanks for the link i tried it finally got it to work on a retail account, but like you said after the first survey it got all messed up and returned to a empty path and was lost

Thanks - M3dik

[chast140]

Okay so i'm completely new to the botting scene and i'm trying to use this for skinning. So anywho is there a way to get the bot to use a flying mount well grinding my main reason for this the bot always seems to get stuck. But anyways thanks for your help jumperu this thread has been great to a new user like myself aside from the one issue i'm having

[jumperu]

Okay so i'm completely new to the botting scene and i'm trying to use this for skinning. So anywho is there a way to get the bot to use a flying mount well grinding my main reason for this the bot always seems to get stuck. But anyways thanks for your help jumperu this thread has been great to a new user like myself aside from the one issue i'm having

It depends how the profile was recorded, as far as i know grinding profiles also have "height" coordinates, so if u record the profile with a fly mount and use it to skip a tree, in theory it should work, although i have never tried it, because grinding profiles are meant to be simple , in a remote area with no objects around (trees, houses, etc)
I would recommend u to record another profile that goes around ur stuck areas, but if u want to bother u can try recording one using fly mount too

[shrugger]

OK, I've got a MW monk behavior that is working pretty well for farming embersilk at Maker's Ascent:

MW grind 2013-05-20.xml

EDIT:Updated behavior HERE (LAZYBOT support thread, Q&A, requests and updates)

Also changed my name to bridger.

Note: Some rules use Send-Keys instead of NAME (maybe unnecessary), so you would need to edit this for your own use.

EDIT - OK, wasn't necessary -- I just had those spells on bar 1 -- Except Legacy of Emperor, which for some reason LB tries to cast it via Bar1-Key6, which is actually occupied by Touch of Death.

• No pulling is set -- I have relied upon running into mobs aggro, to start fights.
• Basic rotation - Spin-kick / Jab / Tiger Palm / Blackout Kick ... a few heals ... the monk buff.
• Healing spells are kinda messy -- Renewing Mist is fine -- Uplift works sometimes -- but sometimes my monk dies without casting either emergency spell. How to make Life Cocoon & Revival cast at low HP? I set thresholds a little higher -- 35% & 20% -- but any higher & it just gets too busy.
• GY & Vendor runs are usually OK.
• The rotation goes a little slow, so sometimes my monk will die on a big pull (clusters of ~12 lvl 84 mobs incl. 1 elite).
  
  > I want to speed up the casting of Spinning Crane Kick Maybe (the primary ability here) -- Maybe the delay is due to the [# of targets] check before each cast?
  > SCK is my all-in-one Healing & AoE dmg, so if it were cast as fast as possible (approx 2 sec with ), other healing spells would be rarely needed, (thus the rotation simpler and faster?)
• Sometimes when looting, monk will just start running off into the desert.. Sometimes he'll get back on track, like if he aggroed something along the way. (maybe a pathing issue? Log always reads "Looting: Schnottz Infantryman")
  
• My main problem now, is full bags (a good problem!). Possible solutions:
  
  1. Figure out Mailbox Use (only in Flying engine?)
  2. Convert Cloth to Bolts. I found a macro, but I'm having trouble integrating it into LB. I tried something similar to Kracken's technique (replaced mount key with macro) but it seems to confuse the engine, & the monk runs in random directions trying to mount.
  

  /cast Tailoring 
  /run for i=1,GetNumTradeSkills() do if GetTradeSkillInfo(i)=="Bolt of Embersilk Cloth" then CloseTradeSkill() DoTradeSkill(i, GetItemCount("Embersilk Cloth")/5) break end end
  /use Purple Dragon Turtle

  3. Open Tiny Treasure Chests & loot them. Similar to problem 2.

I also need to figure out how to use Spots without getting stuck on corners -- I've been relying on running right through a pack of mobs & getting aggroed. Setting pull distance to more than 1-2, would result in him trying to pull guys through walls.

It would be nice to have him "see them coming" rather than running through them to start a fight. Maybe I should just create a LOT of spots along route, with pull distance = 1 or 2

[jumperu]

Hey..i will add it to first post after u fine tune it.. although idk why u farm with a healing specced monk
My comments about ur post:

First use http://www.mediafire.com/?owy7a7kynolu5ib instead of http://www.mediafire.com/view/?owy7a7kynolu5ib .....it will take ppl to the direct download page of the xml

Healing spells are kinda messy -- Renewing Mist is fine -- Uplift works sometimes -- but sometimes my monk dies without casting either emergency spell. How to make Life Cocoon & Revival cast at low HP? I set thresholds a little higher -- 35% & 20% -- but any higher & it just gets too busy.

If renewing mist is first and is set "cast if player under 80%hp" ...and revival is third with "cast if player under 20%hp" ....and spell priority is from top to bottom, the first spell "renewing mist" will always have prio, because player will always be under 80% ...even if he is under 20...he is still considered as under 80...hope u understood...> fix this by moving revival as first spell, life cocoon for under 35%hp..so this second, uplift move it third, as it is set to cast if player under 60%hp, and renewing mist fourth.

The rotation goes a little slow, so sometimes my monk will die on a big pull (clusters of ~12 lvl 84 mobs incl. 1 elite).
> I want to speed up the casting of Spinning Crane Kick Maybe (the primary ability here) -- Maybe the delay is due to the [# of targets] check before each cast?

> SCK is my all-in-one Healing & AoE dmg, so if it were cast as fast as possible (approx 2 sec with ), other healing spells would be rarely needed, (thus the rotation simpler and faster?)

Combat settings down under global cooldown, u have set 1000ms....rogue uses 700ms....try to lower to 700 or 800..and see how it goes..
It also depends on your internet speed. Or maybe you have set in the bot at General settings - Latency a value larger than 0 ms.
If you only want to cast SCK, and this is your main dps/heal ...move it under the first 3 healing spells.

@Touch of death conditions...look under spell detection...at the name of the spell u have put the id...use the exact name of the spell - case sensitive
@Chi wave .. you can use this as a pull spell, just move it to pull tab and add another condition for... Distance to target - less than 40 yd (and u can use spell name instead of send key, you should use the name for almost all spells, except those u are sure the bot does not detect use send key)

Sometimes when looting, monk will just start running off into the desert.. Sometimes he'll get back on track, like if he aggroed something along the way. (maybe a pathing issue? Log always reads "Looting: Schnottz Infantryman")

It's a bug in the bot, no way around it.

My main problem now, is full bags (a good problem!). Possible solutions:
1. Figure out Mailbox Use (only in Flying engine?)
2. Convert Cloth to Bolts. I found a macro, but I'm having trouble integrating it into LB. I tried something similar to Kracken's technique (replaced mount key with macro) but it seems to confuse the engine, & the monk runs in random directions trying to mount.
Code:

/cast Tailoring /run for i=1,GetNumTradeSkills() do if GetTradeSkillInfo(i)=="Bolt of Embersilk Cloth" then CloseTradeSkill() DoTradeSkill(i, GetItemCount("Embersilk Cloth")/5) break end end/use Purple Dragon Turtle

3. Open Tiny Treasure Chests & loot them. Similar to problem 2.

1. yes only in flying engine, you won't succed in making the bot mail items in the grinding mode.
2. The mount macro is mainly for fly gathering, and those motes are instant cast, while as bolts are not. You can add that macro to the pre-pull tab but delete the line with the mount (did not test it, it should work, idk for sure if the bot will wait for the cast time). conditions - ticker 15000 .. send bar/key -where u put the macro
3. Go to general settings - items tab...add tiny treasure there...case sensitive

I also need to figure out how to use Spots without getting stuck on corners -- I've been relying on running right through a pack of mobs & getting aggroed. Setting pull distance to more than 1-2, would result in him trying to pull guys through walls.

It would be nice to have him "see them coming" rather than running through them to start a fight. Maybe I should just create a LOT of spots along route, with pull distance = 1 or 2

Go to engine settings - Approach range...that is the range on wich the bot will begin the combat, no matter what pull distance u set in combat settings behavior. Also lower the distance. I used 25 approach range, 20 for distance. These settings are for when u bot near obstacles...so if bot is set to pull at 40yd..but something is blocking the way, and u set the approach range to 25...he will go closer then pull..

* I also made a while ago a profile in the same zone, u can check it out, i don't remember how i put the spots.

embersilk farm farm.7z

Good luck

[alfeez]

can i have grinding profile for horde 1-60 belf ,undead
because i have the old profile and it will not work with the new lb

[bridger]

Basic Fistweaving / AoE Grind Behavior (5.2) - v0.2

MW-Monk-Grind_v02_bridger_2013-05-21.xml

This is a slightly modified version of what I use for farming Embersilk Cloth in Uldum (Maker's Ascent -- groups of 12, lvl 84, w/ 1 elite).

Why grind with a healer monk? Well it's my only 90. But also, good survivability -- especially against large groups. Spinning Crane Kick & other AoE deal decent dmg while keeping up health (thanks to Eminence).

• I believe abilities must be placed only on bars 2-6 & keys 1-0
• GCD set to 700ms -- not sure what is best. Depends on Haste? I think I read that all monks have a 1s GCD.
• Legacy of Emperor may need to be assigned a Send Key -- for me it wasn't detected properly.

• Leg Sweep is the only talent used here - if HP < 40%. Chi Wave could also be used, as heal or alternate (slower) pull.
• Crackling Jade Lightning is set as pull - only if potential pulled mobs < 2 - Remove this condition if you want it to pull whole groups. If the knockback is causing trouble (knocking off cliffs etc) use Chi Wave, or just don't use ranged.
• Uplift is set to heal only if mobs < 2 -- otherwise, the AoE attacks will give better healing (via Eminence).

Abilities Used:

• Renewing Mist (pre)
• Crackling Jade Lightning (pull)
• Revival
• Life Cocoon
• Leg Sweep
• Spear Hand Strike
• Uplift
• Expel Harm
• Renewing Mist
• Touch of Death
• Rushing Jade Wind
• Blackout Kick
• Spinning Crane Kick
• Tiger Palm
• Jab
• Legacy of the Emperor (buff)

This is my first bot. Feedback appreciated (-:

Also, what is the difference between Spell Detection & Ticker? Seems like either can be used as a condition for spells with a CD. Will one be faster than the other?

[jumperu]

Also, what is the difference between Spell Detection & Ticker? Seems like either can be used as a condition for spells with a CD. Will one be faster than the other?

There is no difference. Spell detection was added later, pre-mop, and it might not work with all spells.
Also ticker can be used to spam a certain macro.

can i have grinding profile for horde 1-60 belf ,undead
because i have the old profile and it will not work with the new lb

There is a 1-60 linked in the first post, i don't have 1 for horde.
Check ? Index page ..maybe they have more posted there..

[bp736b]

Hey guys,

Anyone else having a issue with LB saying not in game even when WoW is open and a toon is logged in?

[jumperu]

Hey guys,

Anyone else having a issue with LB saying not in game even when WoW is open and a toon is logged in?

There was a patch, wait for the update

[olynch]

Its not working because patch 5.3 went live today and the place where your in game status in memory is stored has moved. Hopefully ragehunter will release a patch sometime soon fingers crossed.