LAZYBOT support thread, Q&A, requests and updates

[lazyang]

i don't think it works without memory writing on..but make sure you have bound correctly the interactwithtarget key



ye there were some reports on the other thread too http://www.ownedcore.com/forums/worl...-around-8.html

i lost 2 accounts, while other 2 that were botting the same time are ok and still going, i'm guessing they are taking care of those that got reported..

sorry for your loss, Jumperu
yeah, could be that they haven't so much to do before the patch and use the time to clean the house.

i have this prob with the fishing engine too, in the past it worked correctly without mem writing but now sometimes it starts to bug in Almostepic's described way.
tryed a lot but haven't found a way to fix it.

[LazyRaider]

Excuse me for the ignorance but I am trying to load the profiles for leveling and such on here and when I go to try and load it...nothing happens.

Its the same for one of the behavior routines... it goes and tells me "Could not save behavior System.UnauthorizedAccessException blah blah" when I try to save it. I know I'm just learning how to use this but I've aleady watched the video and read the manual and it does not to help these two issues

edit: ran it in debug mode, every behavior i find keeps telling me it cant find spells on the bars... despite them being there... I am not using bar 1..., I am making sure they are their, my profile problem was fixed... this bot is currently horrible compared to others I've used in the past... although I am new to it and looking for help in solving these problems with the behaviors not finding spells.

[lazyang]

Excuse me for the ignorance but I am trying to load the profiles for leveling and such on here and when I go to try and load it...nothing happens.

Its the same for one of the behavior routines... it goes and tells me "Could not save behavior System.UnauthorizedAccessException blah blah" when I try to save it. I know I'm just learning how to use this but I've aleady watched the video and read the manual and it does not to help these two issues

edit: ran it in debug mode, every behavior i find keeps telling me it cant find spells on the bars... despite them being there... I am not using bar 1..., I am making sure they are their, my profile problem was fixed... this bot is currently horrible compared to others I've used in the past... although I am new to it and looking for help in solving these problems with the behaviors not finding spells.

hmmm, strange, is your client/bot running in the same language? and is it the same language like the behavior you loaded?
hope you didn't use the rotator.
i use bar 1 and haven't any probs.
are your action bars right bound with the shift?
if you haven't done: reset the keybindings and add the 3 things which was explained (interact with tar, last tar and so on) and check again the bindings of your bars.

[jumperu]

this bot is currently horrible compared to others I've used in the past... although I am new to it and looking for help in solving these problems with the behaviors not finding spells.

You say it's horrible cause you have not configure it properly.
first get from the first page the behavior for your char, let's say fury warr for example, and save it in your lazybot folder, behaviors folder. Next go to the bot, open combat setings, and where is the drop down that says select behavior, select fury warr and press close and don't save (don't press save behavior)
Next, when you start the bot, press log debug, and it should show you what spells you have on bars and wich are not (do not use any addons)
If you have a druid, shadow priest, don't use bar 1, use bar 2-6....any key from 1 to 0....not 11 or 12.

If you are low level, depends how the behavior is set, it could be that only the high lvl spells are set into the combat sequence.

If you have more questions, post again, and don't disregard the bot before you see what it can do.

[AlmostEpic]

i don't think it works without memory writing on..but make sure you have bound correctly the interactwithtarget key

Thanks for the quick reply jumperu, I do have interactwithtarget bound correctly as the other engines work fine, and I did try with memory writing turned on and it worked. Why does this one require memory writing when the flying engine which allows to fish from pools does not? I don't really care for the higher risk of the account getting banned for using memory writing.

[lazyang]

afaik you shouldn't use mem writing, ban incoming!

[jumperu]

Thanks for the quick reply jumperu, I do have interactwithtarget bound correctly as the other engines work fine, and I did try with memory writing turned on and it worked. Why does this one require memory writing when the flying engine which allows to fish from pools does not? I don't really care for the higher risk of the account getting banned for using memory writing.

idk why it only works with mw on, could be that the bobber is smaller than the vein/herb and thus the scan misses it, could be that the engine is not written for this version of the bot (r0mbot maintained his own version, the one we are currently using has alot of changes), i will talk to r0mbot and ask him to take a second look at it, maybe he's willing to fix it

[lazyang]

idk why it only works with mw on, could be that the bobber is smaller than the vein/herb and thus the scan misses it, could be that the engine is not written for this version of the bot (r0mbot maintained his own version, the one we are currently using has alot of changes), i will talk to r0mbot and ask him to take a second look at it, maybe he's willing to fix it

the strange thing is, that he starts in the left corner, looks like some parameters () aren't right

[LazyRaider]

You say it's horrible cause you have not configure it properly.
first get from the first page the behavior for your char, let's say fury warr for example, and save it in your lazybot folder, behaviors folder. Next go to the bot, open combat setings, and where is the drop down that says select behavior, select fury warr and press close and don't save (don't press save behavior)
Next, when you start the bot, press log debug, and it should show you what spells you have on bars and wich are not (do not use any addons)
If you have a druid, shadow priest, don't use bar 1, use bar 2-6....any key from 1 to 0....not 11 or 12.

If you are low level, depends how the behavior is set, it could be that only the high lvl spells are set into the combat sequence.

If you have more questions, post again, and don't disregard the bot before you see what it can do.

I'm actually using your lock behavior and it keeps on telling me that I do not have certain spells on my actionbars... even after deleting the behavior and redownloading it and making sure to follow your steps.

Key: Incinerate does not exist on your bars
Key: Mortal Coil does not exist on your bars
Key: Unending Resolve does not exist on your bars
Key: Incinerate does not exist on your bars
Key: Summon Doomguard does not exist on your bars
Key: Flames of Xoroth does not exist on your bars
Key: Fire and Brimstone does not exist on your bars
Key: Incinerate does not exist on your bars

[jumperu]

I'm actually using your lock behavior and it keeps on telling me that I do not have certain spells on my actionbars... even after deleting the behavior and redownloading it and making sure to follow your steps.

Key: Incinerate does not exist on your bars
Key: Mortal Coil does not exist on your bars
Key: Unending Resolve does not exist on your bars
Key: Incinerate does not exist on your bars
Key: Summon Doomguard does not exist on your bars
Key: Flames of Xoroth does not exist on your bars
Key: Fire and Brimstone does not exist on your bars
Key: Incinerate does not exist on your bars

make sure you have installed the latest .net framework (if you are not sure, reinstall it)...it's the only cause that the bot does not "communicate" (find spells, mount&move, etc) properly with wow
also, if you are on win8, could be the cause..

does it find all the other spells?..are you sure you are in destro specc and with the talents i pointed?

[LazyRaider]

Just got it to find all but Incinerate.. it thinks incinerate is Shadowbolt..

I have the newest .net framework as well, not running win8

[jumperu]

Just got it to find all but Incinerate.. it thinks incinerate is Shadowbolt..

I have the newest .net framework as well, not running win8

go to combat settings, combat tab, open up incinerate, tick send key..and set the key for incinerate.. ...lemme know how the behavior is and how to improve it

[Evilwookie]

What would you say is the best class for doing all the things u can do with botting, grinding places, herb/mining, etc

[chiem]

Are there any PVP profiles?

[jumperu]

What would you say is the best class for doing all the things u can do with botting, grinding places, herb/mining, etc

Best for grinding are warrs/pala/dk....good behaviors for each and they can take multiple mobs at the same time. Hunters too.
I would not recommend mages/lock cause they are squishy.

For gathering i suggest druid, cause he does not dismount when gathering herbs, so it saves some time, but pala/dk are good to with the talent for speed increase.

Are there any PVP profiles?

This bot does not support PVP.