[PQR] Kuukuu's Brewmaster Profile Feedback and Suggestions

[kuukuu]

Just a simple thank you message just because i have used your Brewmaster profile all the way to 90 and it is simply perfect I specced Windwalker yesterday and pulled some great numbers already in half blue half green gear.

Thanks for your work kuukuu!

Thank you, glad it's helpful.

[Moonst]

as always kuukuu your brewmaster profile is awsome and i was wondering if you were going to do anything with the prot war like make a pqi for it or make a lvling profile any how catch ya later.

[kuukuu]

as always kuukuu your brewmaster profile is awsome and i was wondering if you were going to do anything with the prot war like make a pqi for it or make a lvling profile any how catch ya later.

I actually haven't touched my prot warrior since I got my monk geared up. It was my main for raiding until that point but I find monk much more fun so I'm not sure if I will do that or not. If I do, it's rather low on priority atm.

[kuukuu]

4.8 Released:
PQI 0.3 Released:

General

- Added support for Tier 4 abilities on the middle mouse button (Thank you to Krodran for assistance in fixing the code )


This will likely be the last update till 5.4 comes out.

[kwalti]

Hello there,

Let me start with saying Thank you.
It is an unbeliaveble profile and its FREE.
Loving hte Brewmaster and the Windwalker too.
I updated today to the latest version.
My problem is that it autoaccepts LFD and LFR and every invite.
Is it PQR or your profile that doing that?

## Interface: 50100
## Title: |cff00aaffPQInterface|r
## Notes: PQRotation Interface, HUD for PQRotation by Xelper.
## Author: Diesal
## Version: 2.22
## SavedVariables: PQInterfaceDB
## OptionalDeps: Ace3, DiesalDev, DiesalUI
## X-Embeds: Ace3
## X-Category: Combat

Also this is my PQI version, where can i get the PQI 0.3 you mentioned?


Thank you for your profile again.

[kuukuu]

Hello there,

Let me start with saying Thank you.
It is an unbeliaveble profile and its FREE.
Loving hte Brewmaster and the Windwalker too.
I updated today to the latest version.
My problem is that it autoaccepts LFD and LFR and every invite.
Is it PQR or your profile that doing that?

## Interface: 50100
## Title: |cff00aaffPQInterface|r
## Notes: PQRotation Interface, HUD for PQRotation by Xelper.
## Author: Diesal
## Version: 2.22
## SavedVariables: PQInterfaceDB
## OptionalDeps: Ace3, DiesalDev, DiesalUI
## X-Embeds: Ace3
## X-Category: Combat

Also this is my PQI version, where can i get the PQI 0.3 you mentioned?


Thank you for your profile again.

It's not my profile so must be an addon and the PQI version I mentioned is the current version of my profile that is set up for PQI, not an actual variation of Diesal's PQI itself. I'm currently maintaining two different versions of the profile, one with PQI and one without.

[MrBrain1]

Message: [string "if IsInRaid() then ..."]:15: attempt to compare nil with number
Time: 08/19/13 13:54:38
Count: 1463
Stack: [C]: ?
[string "if IsInRaid() then ..."]:15: in function `?'
[string "if PQR_Addon_Loaded == nil then..."]:765: in function `PQR_NextAbility'
[string "if PQR_Addon_Loaded == nil then..."]:534: in function `PQR_ExecuteRotation'
[string "if PQR_Addon_Loaded == nil then..."]:287: in function <[string "if PQR_Addon_Loaded == nil then..."]:214>

Locals:

while using your profile in 5 mans

[kuukuu]

while using your profile in 5 mans

That's from the Detox code it looks like. Only thing I could think that would throw that error would be if PQR_UnitDistance was giving nil instead of a number. I'll try and duplicate it, but you can just remove the Detox code if it keeps throwing errors.

[BecauseRacecar]

Started using your prot warrior profile. Made some rotation changes and added a few things. my only real problem is that I get an error if I load the profile without loading another first. sorry kinda new so i'm prob doing something wrong. I could post it if you want, pointers would be nice

[kuukuu]

Started using your prot warrior profile. Made some rotation changes and added a few things. my only real problem is that I get an error if I load the profile without loading another first. sorry kinda new so i'm prob doing something wrong. I could post it if you want, pointers would be nice

If you want to post the error log, I can take a look and see if I can figure it out. I haven't done anything with the prot profile in a while though.

[Enuma]

Non PQI profile works like a charm! Outstanding work on all of the profiles, i use them all. Simply love them.

i have two questions if you may help me:

1. Does WindWalker profile support "Ascension?" I notices just yesterday that my monk never generates that 5th Chi Point. Even so with good chain procs hes behaving like i dont have that talent and always generating 4 Chi Points. Exclusion is "chi buildup" sequence trough "Expel Harm"

2. Can you please tell me how did you code TigerEye Brew usage with RoR trinket? I, unfortunately havent had luck in getting it yet since im taking a break from riding atm.
From all the theorycrafting that i read it goes as follows:
RoR procs, you try to pool as much Chi and Energy as you can, 1-3 secs before RoR buff expires you use your TigerEye Brew, preferably with 10 stacks of it. That way, TigerEye Brew will take the benefit of increased mastery and you will have your stats back on normal.
Is that how you code it?

Ty in advance for reply.

Take care mate, keep up the good work, these profiles are best profiles that i have ever used.

[kuukuu]

Non PQI profile works like a charm! Outstanding work on all of the profiles, i use them all. Simply love them.

i have two questions if you may help me:

1. Does WindWalker profile support "Ascension?" I notices just yesterday that my monk never generates that 5th Chi Point. Even so with good chain procs hes behaving like i dont have that talent and always generating 4 Chi Points. Exclusion is "chi buildup" sequence trough "Expel Harm"

2. Can you please tell me how did you code TigerEye Brew usage with RoR trinket? I, unfortunately havent had luck in getting it yet since im taking a break from riding atm.
From all the theorycrafting that i read it goes as follows:
RoR procs, you try to pool as much Chi and Energy as you can, 1-3 secs before RoR buff expires you use your TigerEye Brew, preferably with 10 stacks of it. That way, TigerEye Brew will take the benefit of increased mastery and you will have your stats back on normal.
Is that how you code it?

Ty in advance for reply.

Take care mate, keep up the good work, these profiles are best profiles that i have ever used.

1) As far as I am aware, there is no reason to actually pool chi to 5 while in combat so there is no code specific to Ascension. I have never seen anything on EJ or in Simcraft to show any reason to so basically if you're never seeing the 5th chi, you're using chi up enough to never get to it.
2) When RoR is detected, TeB will only be used at 19+ stacks or in the last 1.5 seconds of an RoR proc..

[Enuma]

1) As far as I am aware, there is no reason to actually pool chi to 5 while in combat so there is no code specific to Ascension. I have never seen anything on EJ or in Simcraft to show any reason to so basically if you're never seeing the 5th chi, you're using chi up enough to never get to it.
2) When RoR is detected, TeB will only be used at 19+ stacks or in the last 1.5 seconds of an RoR proc..

Nice! ty for being extra fast
I see that there is PQI version of WindWakers profile, however i cant find it anywhere. Can you give me a link to it, just to test it?

And can you explain this a bit better? "4.8 (PQI version 0.3)" I see that more people, besides me, are confused. Does this mean that its a 0.3 version of WW profile that supports PQI or new version of PQI? If im not mistaken, latest version of PQI is 2.27 released in March this year.

[kuukuu]

Nice! ty for being extra fast
I see that there is PQI version of WindWakers profile, however i cant find it anywhere. Can you give me a link to it, just to test it?

And can you explain this a bit better? "4.8 (PQI version 0.3)" I see that more people, besides me, are confused. Does this mean that its a 0.3 version of WW profile that supports PQI or new version of PQI? If im not mistaken, latest version of PQI is 2.27 released in March this year.

http://dl.dropboxusercontent.com/u/4..._Rotations.xml Copy that into PQR and you should get the newest version and yes it's version 0.3 of the profile.

[BecauseRacecar]

Here is the error I got
Message: [string "if UnitAffectingCombat("player") ..."]:51: attempt to call global 'inCombat' (a nil value)

Count: 996

Stack: [C]: in function `inCombat'
[string "if UnitAffectingCombat("player") ..."]:
51: in function `?'
[string "if PQR_Addon_Loaded == nil then..."]:765: in function
`PQR_NextAbility'
[string "if PQR_Addon_Loaded == nil then..."]:534: in function
`PQR_ExecuteRotation'
[string "if PQR_Addon_Loaded == nil then..."]:
287: in function <[string "if PQR_Addon_Loaded == nil then..."]:214>

Locals: