LazyFish - 100% passive fishing bot!

[proneb]

Thanks to everyone and sorry to everybody else that the bot isnt working for.


New version

v1.1.4
- Enabled remaining settings
- Added anti afk
- Fixed bugs, optimized code.
- Encryption removed, only obfuscated

Can the scanner box be moved from left to right? (instead of just up or down) For example I'd like to move the scanner over to the right so I can watch youtube on the left hand side of the screen.

[adavies219]

So this works when I cast the hook manually, but no matter what hotkey I set it to, it isn't casting the hook.

Edit: I changed it to a letter and not a number and it works fine. Great bot. Best one out there by far

[Twickster]

I have dual monitor as well and it's working fine for me. I use the huge bobber which helps make it a LOT faster and I've got the scanning position changed to width 31 height 23 and offset 20 going left to right set at 50. my resolution is 1920x1080 with lowest settings while botting and I've not had trouble with it. at first it would have a couple misclicks but it straightened itself out and worked flawlessly after that. I also have autoloot on ofc and my camera zoomed in all the way then the view of the water should take up about 5/7 of your screen or at least that's how it's working well with me. tbh i don't have issues with other set ups but this is just my set up and it's working well. thought I'd share and maybe you and others could give it a go

Thanks for your reply. Tried everything you recommended still not working.

I KNOW the bot is trying to hit the hotkey cause its making that button clicking noise but its IN the bot, not in wow. When i click into wow it then stops scanning lol. This is so hard to explain.

The bot scans on my wow screen. BUT it wont start scanning UNLESS I manually click anywhere in the bot program.. seems like it wants me to focus on the bot program to start the bot. But then when it tries to cast its not focused on wow so it doesnt cast. But its trying because I can hear the clicking noise. (Windows 10 noise not wow noise).

It seems as if I focus on WoW as it thats the program thats opened it doesnt scan/start even tho the program is trying sessions. When I click on the bot it takes its focus off of wow and starts scanning but it cant cast because its clicking the hotkey but not in wow.

I hope that makes sense lol

*Edit, i've tried with auto focus WoW on and off and its not working either one

[Twickster]

Also, im still getting the error bobber is too small while using big bobber item. This thing is huge and still getting the error all the way zoomed in and my screen is horizontal with mostly water taking the screen up

[Twickster]

I finally got it to work. I had to restart my pc lol. Working great.

By the way i'm curious.. Blizzards Warden constantly tracks our computer processes and thats how they catch you. Wouldnt you be able to rename the program to bypass warden? lol just curious. Instead of them scanning for LazyFish it would say Calendar or something instead haha.

[Ylts]

Something weird just happened!!!
I set up the bot, all was good, went away from computer, came back about 20-30 minutes later and i saw Orgrimmar loading screen suddenly.
Noticed that Wrap of Unity was equipped and used...
So beware!!!!

As you can see all of the action on the screenshot
oddfishing.jpg

[Seylah]

I finally got it to work. I had to restart my pc lol. Working great.

By the way i'm curious.. Blizzards Warden constantly tracks our computer processes and thats how they catch you. Wouldnt you be able to rename the program to bypass warden? lol just curious. Instead of them scanning for LazyFish it would say Calendar or something instead haha.

nice! good ol' off and on solution

yeah I agree the bot should have a rename option but free is free and blizz will eventually detect it if they want to anyway.

[Createaa]

Sorry that I am not responding to everyone, I am still reading everything though. I am working as fast as I can trying to solve everything.

The bot doesnt have eyes, it reads everything with changes on the cursor. If it says the bobber is too small then the bot didnt get a good read. Anyway shouldnt happen too often anymore, if it happens just let it rethrow untill it doesnt.

Some requests added! If you wish to change the name of the process in taskmgr you have to rename the file name. Thats it.

v1.2
- Removed all titles and you can now set your own
- Removed all icons
- Changed namespace and original file name to Skype (Sorry and thank you, Skype). If you have a better idea, please share.

Can the scanner box be moved from left to right? (instead of just up or down) For example I'd like to move the scanner over to the right so I can watch youtube on the left hand side of the screen.

Sure, didnt think people would want to move it off center. Cant promise when though.

[Twickster]

Sorry that I am not responding to everyone, I am still reading everything though. I am working as fast as I can trying to solve everything.

The bot doesnt have eyes, it reads everything with changes on the cursor. If it says the bobber is too small then the bot didnt get a good read. Anyway shouldnt happen too often anymore, if it happens just let it rethrow untill it doesnt.

Some requests added! If you wish to change the name of the process in taskmgr you have to rename the file name. Thats it.

v1.2
- Removed all titles and you can now set your own
- Removed all icons
- Changed namespace and original file name to Skype (Sorry and thank you, Skype). If you have a better idea, please share.

Sure, didnt think people would want to move it off center. Cant promise when though.

So now under processors it’s listed as Skype? Does it have the Skype icon too?

[Createaa]

So now under processors it’s listed as Skype? Does it have the Skype icon too?

No, its original file name is shown as skype. The process name is the name of the exe. It doesnt have the Skype icon. The icon is blank, empty.

To change exe name, press on the file (LazyFish) and press "F2".

[Twickster]

No, its original file name is shown as skype. The process name is the name of the exe. It doesnt have the Skype icon. The icon is blank, empty.

To change exe name, press on the file (LazyFish) and press "F2".

Ooooohhhh i see. Thank you for your contributions. I got it to work and it works great. Time to open an alt account to continue using it! Thanks

[kbone213]

Any word on the random errorless force closing?

[Alpy]

Any word on the random errorless force closing?

I have the same Problem. The Bot works fine for me i would say 98%. The only thing is when the bite came before he reached the blobber then it fails.

I used him for about a few hours but it closes witout any error after 30-60 min i think. Sorry for Bad English^^

if i use the F6 key for stopping im getting an Error:

nformationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.

************** Ausnahmetext **************
System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
bei dSDJkVdYVhYgOPwdFd.UlxDBWq1vAYkVwvDWJ.iU7dpoBKM()
bei Skype.LazyFishMain.G0NHn0xq7M()
bei Skype.LazyFishMain.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Geladene Assemblys **************
mscorlib
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3132.0 built by: NET472REL1LAST.
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll.
----------------------------------------
Skype
Assembly-Version: 1.2.0.0.
Win32-Version: 1.2.0.0.
CodeBase: file:///C:/Users/Alpy/Desktop/Musik/Logitech%20Updater.exe.
----------------------------------------
System.Windows.Forms
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll.
----------------------------------------
System
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3151.0 built by: NET472REL1LAST_B.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll.
----------------------------------------
System.Drawing
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.
----------------------------------------
WindowsInput
Assembly-Version: 1.0.4.0.
Win32-Version: 1.2.0.0.
CodeBase: file:///C:/Users/Alpy/Desktop/Musik/Logitech%20Updater.exe.
----------------------------------------
System.Configuration
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll.
----------------------------------------
System.Core
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3160.0 built by: NET472REL1LAST_C.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll.
----------------------------------------
System.Xml
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll.
----------------------------------------
mscorlib.resources
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_de_b77a5c561934e089/mscorlib.resources.dll.
----------------------------------------
System.Windows.Forms.resources
Assembly-Version: 4.0.0.0.
Win32-Version: 4.7.3056.0 built by: NET472REL1.
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_de_b77a5c561934e089/System.Windows.Forms.resources.dll.
----------------------------------------

************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.

Zum Beispiel:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.

[angrytestie]

bot is fishing fine - but randomly force closing without any error after like 20-30min! pls fix?

[Shiftfaces]

This is the error I am getting every time I try to get the hook (F4) to work.

ERROR: System.Runtime.InteropServices.ExternalException (0x80004005): A generic error occurred in GDI+.
at System.Drawing.Image.Save(String filename, ImageCodecInfo encoder, EncoderParameters encoderParams)
at System.Drawing.Image.Save(String filename, ImageFormat format)
at System.Drawing.Image.Save(String filename)
at LazyFish.LazyFishMain.WndProc(Message& m)



Any ideas on what to do?