Using PogoFeeder and Necrobot to Snipe Automatically ( Pull Discord)

[swarnes]

Firstly, I am not taking credit. Its shared from se7ensins

tested and working

Hey guys, I wrote a quick tutorial on how to run Pogofeeder and use it with Necrobot.

If you guys are not familiar with NecroBot, I suggest you go here to Download it and set it up.
https://github.com/NecronomiconCodin....0/Release.zip
http://www.filedropper.com/pogofeederv001
Regardless, here is PogoFeeder.
[​IMG]
It automatically finds Coordinates posted on your Discord Channels that you specify.

Downloadhttp://speedy.sh/5XeHX/PogoFeeder-V0.0.1.zip | Virus Scan

Download the files.
Extract files into a folder.
Run PogoLocationFeeder.exe, it should pop open then close.
It will of created a Config.json file in the main folder.
Open config.json in the main folder of Pogofeeder & with Notepad/ Notepad ++.
Enter Discord Credentials into
"DiscordUser": ">>>User E-Mail Here<<<",
"DiscordPassword": ">>>Password Here<<<"

Now it's time to add the Server Channels you want it to listen too.
Open your Discord Apps and find some goods ones. I reccommend this one & NecroBot's Server

Now in the same Config.json file, under ServerChannels
Add whichever Server channels you use on Discord for finding Coordinates.
I use the following

"ServerChannels": [
"sniping",
"high_iv_pokemon",
"rare_pokemon",
"90_plus_iv",
"coordsbots",
"rare_spottings"

Add more if you have some better ones yourself. Just make sure there is a comma after all of them, except the last one. See example above.

Close and save Config.Json

Right Click PogoLocationFeeder.exe and Run as an Administrator
At this point you should have a, "Listening..." notification. This is good.

Next let's head over to Necrobot.

Open your Necrobot folder/ Config/ Config.json
Make sure is set to the following.
"SnipeAtPokestops": true,
"SnipeIgnoreUnknownIv": true,
"SnipeLocationServer": "localhost",
"SnipeLocationServerPort": 16969,
"UseSnipeLocationServer": true,

You can also adjust other Sniping related settings by looking around. I'm simply giving you the basics on what you need for this to work.


Run PogoFeeder then Necrobot.

Pogofeeder should give you a new notification about a connection from 127.0.0.1

Then, if you start getting notifications about Pokemon you set it up correctly. You should see Necrobot get some of the Pokemon but, it will not catch them all depending on how quick Pogofeeder finds the coordinates.

Enjoy.

If you have any Necrobot related issue please check out the Necrobot Thread.

If you have a Net Framework issue please download the latest Net Framework.
If you have an error about Server Parsing, you need to double check your Discord Credentials and how you have the server channels set up in the PogoFeeder Config.json.

PTC works fine for both, google im having issues with..


[

Hey guys, I wrote a quick tutorial on how to run Pogofeeder and use it with Necrobot.

If you guys are not familiar with NecroBot, I suggest you go here to Download it and set it up.

Regardless, here is PogoFeeder.

It automatically finds Coordinates posted on your Discord Channels that you specify.

Download| Virus Scan

Download the files.
Extract files into a folder.
Run PogoLocationFeeder.exe, it should pop open then close.
It will of created a Config.json file in the main folder.
Open config.json in the main folder of Pogofeeder & with Notepad/ Notepad ++.
Enter Discord Credentials into
"DiscordUser": ">>>User E-Mail Here<<<",
"DiscordPassword": ">>>Password Here<<<"

Now it's time to add the Server Channels you want it to listen too.
Open your Discord Apps and find some goods ones. I reccommend this one & NecroBot's Server

Now in the same Config.json file, under ServerChannels
Add whichever Server channels you use on Discord for finding Coordinates.
I use the following

"ServerChannels": [
"sniping",
"high_iv_pokemon",
"rare_pokemon",
"90_plus_iv",
"coordsbots",
"rare_spottings"

Add more if you have some better ones yourself. Just make sure there is a comma after all of them, except the last one. See example above.

Close and save Config.Json

Right Click PogoLocationFeeder.exe and Run as an Administrator
At this point you should have a, "Listening..." notification. This is good.

Next let's head over to Necrobot.

Open your Necrobot folder/ Config/ Config.json
Make sure is set to the following.
"SnipeAtPokestops": true,
"SnipeIgnoreUnknownIv": true,
"SnipeLocationServer": "localhost",
"SnipeLocationServerPort": 16969,
"UseSnipeLocationServer": true,

You can also adjust other Sniping related settings by looking around. I'm simply giving you the basics on what you need for this to work.


Run PogoFeeder then Necrobot.

Pogofeeder should give you a new notification about a connection from 127.0.0.1

Then, if you start getting notifications about Pokemon you set it up correctly. You should see Necrobot get some of the Pokemon but, it will not catch them all depending on how quick Pogofeeder finds the coordinates.

Enjoy.

If you have any Necrobot related issue please check out the Necrobot Thread.

If you have a Net Framework issue please download the latest Net Framework.
If you have an error about Server Parsing, you need to double check your Discord Credentials and how you have the server channels set up in the PogoFeeder Config.json.

[swarnes]

https://gyazo.com/bfb231d9cb16881383f2d92d9b2aa784 it works but when sniping getting softban ..


https://gyazo.com/fb62d431368964cb212ae61c8d3f2892 working okish

[swarnes]

http://www.ownedcore.com/forums/poke...-coded-me.html (NecroBot with nice GUI (coded by me )) with the sniper works perfect.

[vayneprod]

wont u get softban if u bot in ny and try to snipe a dragonite in hk ???

[NOORZ1]

what do you mean by server channel

[goldmmo.x]

Mine is farmming em really slowly lol. Whats ur time between snipes?

[bMitch7]

Where do you find the servers DiscordToken?

[LCCL]

thanks a lot for this bot! but,there is an error for me ,that i can not download the Pogofeeder with your LINK,could you update a new link for download the Pogofeeder? thanks a lot,bro :P

[swarnes]

Check google se7ensins sniper, and ill make guide later, https://gyazo.com/b17fc15ed60b285e2b9e614574c5b745 Working fine work PTC aacounts farming and sniping, google account keeps banning me.
http://www.se7ensins.com/forums/thre...cally.1545070/
remove remove link if not allowed.

[swarnes]

The important thing is to download..
Step 1..Necro Gui ....Necronomicon_0.4.0_withUI
Step 2. PogoFeeder V0.0.1.zip - Speedy Share - upload your files here - Link worked for me.
Follow instructions as above. I simply added the snipe code into Necro, as requested. You need Discord too.
Follow instruction was very simple for me to set up

[paynemax14]

dude can you give me a mirror link? can;t download from this one!

[k199]

Downloadhttp://speedy.sh/5XeHX/PogoFeeder-V0.0.1.zip | Virus Scan

can you provide another link

[swarnes]

Let me find upload site. http://www.filedropper.com/pogofeederv001

[swarnes]

I will create a better guide, this is pretty nice together

[amriyu67]

give me alternative link download, filedropper & speedyshare cant download T.T