[Open Source] Lucky's Spacebot

[phagotron]

Drexel now runs like a machine, thanks TM! Was hard work too for sure, should help a lot to finally get Sullust to work too.

[TMichael]

Drexel now runs like a machine, thanks TM! Was hard work too for sure, should help a lot to finally get Sullust to work too.

Thanks! Combined your efforts with a few timing and directional tricks. The ship still hits that rock at 25 seconds though... :confused:

For Sullust, it should just be a matter of copy pasta after the first few lines of code, then replace every Drexel with Sullust in the code. I should have done that, but I was extra sleepy this morning.

[Ainew]

UPDATE 5.35 - R174

Revision 174 is now available from the unstable x86 trunk.

- Drexel is working much better with ~75% success rate at level 40 with no bonus mission selected, still a work in progress
- Includes recent updates to Impossible Sector, Ascendancy, Kalee, Hydrian Way, and Polith from previous revisions
- New GNU Public License
- Numerous small updates and improvements
- Thanks to Cystacae, Phagotron, Vapor, and contributors for all the hard work


COMING SOON

- Improved UI interface
- Mission and crew task improvements
- Bug squashing with giant coder fly swatter
- Version 6.0

Edit never mind I fixed the problem.

[meadtj]

need invite to assembla...same name as to the left

[Cystacae]

The Lucky Spacebot team has expanded to include some new members meadtj - coder, Bishop - coder, Criekee - Images and UI, and Breathofthedying - Documentation, Guides, Q&A, Support. This brings the team up to a total of 8 which makes us twice as big as we were. Please welcome them to the project and they will be around to support each other and assist you better. Man I need to buy new batteries for my mouse. For some reason my RAT 9 batteries are not holding a charge like they used to. Hey Phago and TM do you want UI Images to go into a separate folder? I know for the personalizations for the UI I am adding they will be separate as the coding for it will too. I will figure that out without interfering in the current code set and will undoubtedly be consulting one of you guys on how I should aim for this as you guys are my vets. I'd prefer to pick your brains anyways. The new coders are also professionals and Criekee from what I gathered is an image editor on a normal basis so we should be bringing this into a new evolution. I have Criekee on a project in between supporting you guys. Criekee is also native German so he can also help on that end. Maybe I can come out to Germany and drink a few beers and have a brats with Phago and Criekee. I wish I could do just that! Anyone want to donate a plane ticket? lol! Back to image editting for the UI and then to continue on the design. I will be buying a new laptop and will transfer my files over to it along with my access data for the SVN so I can access this while I am on vacation in Texas and then the Carolinas. I will hopefully leave in the 2nd week in August and will be gone for a total between them of 4 weeks. I will be driving so I will be only available during this time when I stop for the eve in a hotel. I am certain the current team though has all the people we need for now.

[Cystacae]

Pakuuni Defense doesn't work for me at all with this UPDATE 5.35 - R174. It just exits the mission and logs out in the start already.

With the build 5.34 he didn't finish the mission at all.
I got all equipment for Grade3 + PCM ... the bot just doesnt shoot half of the time and just getting shoot at.

Out of curiosity could you update to the new R178 as well as post a copy of the sysinfo after hitting the sysinfo button on the about page with your bug report? Phago put it there to help them out.

[Cystacae]

Cystacae where can i get this R178? I only find R174 or R175

Luckys Spacebot v5.35 (R175)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:3 GB, used:62 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=94
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=1
Last mission=Pakuuni Defense
Win / Loss 0 / 1

Mission gets closed at 5:07 Minutes Right after that ship with yellow tail appears on screen.

Edit: Fixed the problem. I had to calibrate to 125 Anyway still where to dll 178?

178 maybe mismarked as something else. if you downloaded recently from the link then it was 178.

[Breathofthedying]

First draft notes on installing and helper apps

Warning if you erase you computer or anything bad happens its you own fault... don't follow these instructions. Go play Hello kitty DO NOT DO THIS!!!

Installing spacebot

• SET WINDOWS THEME TO AERO
• Download/update bot
• Current unstable build x86(x64 is working fine atm, If you not sure what you need and are smarter enough to read this use x86)
  
• Install Zip software if needed
• Unzip into space bot folder
• Create spacebot folder if needed
  
  
• Download and install AutoIt
• Open spacebot folder
• Find the application and delete it
• Highlight the AutoIt script, right click, compile script x86
• Right click app, create shortcut, drag shortcut to desktop
• Start star wars
• Accept missions
• Stand in front of centered seat
• Esc , preferences , graphic setting ,1024x768 click apply keep changes
• Windowed apply keep changes
• Graphics quality preset low
• Apply
• Set interface to default
  
  RESTART SWTOR COMPLETELY
  
• Open bot as administrator
• Options - Turn off try bonus ( for dalies or at least til settings are dialed in). Click. calibrate
• Nominal = ok(on error check prev steps... still error, SOL. Chech readme.txt)
• Go to Mission screen and Test the missions you need for dallies(first time run through) as this will give you a hit if the mission fails.
  
  
  "Before running dailies, a mission should be started from main tab. Watch the debug output and compare it with the ingame timer to make sure that it syncs.
  See section Mission start & Timer sync in Readme if there is a gap or the mission ends early."-phagotron

[kcho]

I'm using 5.34 doing "Pakuuni Defense" at the moment, but the bot only able to kill 47-49/50 bombers, cannot complete objectives. I've tried changing the image tolerance but it didnt help. Is there something I hasnt setup properly? Anyone else has that problem?

[Cystacae]

First draft notes on installing and helper apps

Ill edit and fill in. My wife was installing it fresh and jotted notes.
Installing spacebot

• lucky's space bot
• Download/update bot
• Current unstable build x64
• Install Zip software if needed
• Unzip into space bot folder
• Create spacebot folder if needed
• Download and install AutoIt
• Open spacebot folder
• Find the application and delete it
• Highlight the AutoIt script, right click, compile script x64
• Right click app, create shortcut, drag shortcut to desktop
• Start star wars
• Accept missions
• Stand in front of centered seat
• Esc , preferences , graphic setting ,1024x768 click apply keep changes
• Windowed apply keep changes
• Graphics quality preset low
• Apply
• Set interface to default
• Open bot as administrator
• Options - calibrate
• Nominal = ok
• Go to dailies

You can not just compile an x86 version to x64... there is a totally different ImageSearchDLL.dll, that is x64 compiled, and a modded ImageSearch.au3 that are specifically in the x64 version.

[Cystacae]

I'm using 5.34 doing "Pakuuni Defense" at the moment, but the bot only able to kill 47-49/50 bombers, cannot complete objectives. I've tried changing the image tolerance but it didnt help. Is there something I hasnt setup properly? Anyone else has that problem?

Image tolerance isn't the ability to acquire targets. Image tolerance only affects Image searches for start, syncing, etc. Pixel searching is what the bot does to acquire targets. Try to check or uncheck PSX debug. That will greatly affect rate of fire if I remember correctly. Also so will the missile timer in the options tab.

[vapor311]

btw CY I live in ft worth

[phagotron]

First draft notes on installing and helper apps

Ill edit and fill in. My wife was installing it fresh and jotted notes.
Installing spacebot

• Current unstable build x64
  
• Esc , preferences , graphic setting ,1024x768 click apply keep changes
  
• Set interface to default
  
• Go to dailies

Thanks for the checklist, nice one.Awful number of steps to perform :)

I suggest the x86 model. There still are lots of 32bit Windows installations running, compiling the bot to x64 wont give any known benefit.
Also it might happen that we have to restrict to x86 in a coming version.

The 1024x768 is windowed mode, also a client restart should be applied after changing.

The client interface must be the Default one from the dropdown box ;)

Before running dailies, a mission should be started from main tab. Watch the debug output and compare it with the ingame timer to make sure that it syncs.
See section Mission start & Timer sync in Readme if there is a gap or the mission ends early.

[scraper101]

Luckys Spacebot v5.35 (R175)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:11 GB,free:7 GB, used:36 %
Desktop dimensions: 1920x1080(32bpp, 120Hz)

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=49
Missile Delay=333
Timer Skew =+50
IMG Tolerance=100
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0

In the mission Aetan Defence on the 64 bit version, the mission is compleating only about 85% of the time. When I watch the mission, it sometiems does not fire the lazers on the sec and third run on the station.

Love the bot guys and keep up the great work...

[Breathofthedying]

Thanks for the checklist, nice one.Awful number of steps to perform

I suggest the x86 model. There still are lots of 32bit Windows installations running, compiling the bot to x64 wont give any known benefit.
Also it might happen that we have to restrict to x86 in a coming version.

The 1024x768 is windowed mode, also a client restart should be applied after changing.

The client interface must be the Default one from the dropdown box

Before running dailies, a mission should be started from main tab. Watch the debug output and compare it with the ingame timer to make sure that it syncs.
See section Mission start & Timer sync in Readme if there is a gap or the mission ends early.

Will fix, update, add info and clean.