[Open Source] Lucky's Spacebot

[TMichael]

I found a simpler solution by using NVIDIA Control Panel and creating a custom resolution, 1366x804. Now all the ship skills activate.

Still getting wrecked in the later half of drexel sweep though. Using all grade 5 except the grade 4 missiles.

Luckys Spacebot v5.35 x86 (R233)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:3 GB,free:0 GB, used:76 %
Desktop dimensions: 1366x804(32bpp, 60Hz)
Desktop theme: Custom

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804
Color scheme: Aero

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=0
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Drexel Sweep
Win / Loss 0 / 1

Try enabling HD mode. Also, game tolerance is enabled on this mission, so you can try increasing or decreasing that value in increments of one to see if that helps. Good luck!

EDIT

If by wrecked you mean taking too much damage, check to see that your mission is starting at the correct time. If not, try decreasing Image Tolerance until it does. Level 40ish ships do tend to take a great deal of damage with this one, but should survive 90%+ of the time if all is well.

[TMichael]

but its only these 4 missions that do no work all of the others which i can do work fantastic but you are right about the misclicking i have to lower my window about.. say have an inch but then it works fine so I do not see why i would need a VM just to run 4 missions?

Well, I would guess that earlier missions will complete successfully whether your shield booster/blaster booster have been activated or not. In the four missions causing you trouble, they are probably required for mission completion. The bot checks for an off-black color on your first two hot keys to determine whether the booster/shield is off, and I suspect this isn't happening. I had this same problem with my wife's rig, on which I also had to move the window down.

TL;DR: Lucky's runs best with only the correct settings and resolution. If your monitor does not properly display height resolutions greater than 768, the window compacting will cause these issues.

On the bright side, running the bot on a virtual machine has its advantages.

[Jevnaker]

We already discussed your issue. If there is no way for you to make your Notebook / Game client meet the recommendations, you have to cut out your own timer sync images.

Since our telepathic interface still is under construction, we need a bit more specific input if you want help on your notebook settings. Post sysinfo and a screenshot of your whole desktop, maybe we can say more with that.

lol i have usually just used older versions and that has worked i used some older version for some missions and another earlier version. but now i am no longer able to fidn those to download. brb with syinfo

back here is the info
Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:11 GB, used:29 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Fondor Escort
Win / Loss 0 / 0

[phagotron]

lol i have usually just used older versions and that has worked i used some older version for some missions and another earlier version. but now i am no longer able to fidn those to download. brb with syinfo

back here is the info
Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:15 GB,free:11 GB, used:29 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

Very good idea to minimize the game client for the screenshot, lol.

Is there any specific reason that you are using a high contrast theme?

[Death1212]

I still can't get anything to run. No matter what the tolerance is, it starts then stops (leave current mission) tab is up and stays in upper right of the screen. Not to mention, it wont run after that unless I restarts my whole pc.


Luckys Spacebot v5.35 x86 (R233)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:5 GB,free:2 GB, used:55 %
Desktop dimensions: 1600x900(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804
Color scheme: Basic

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=
Win / Loss 0 / 0

[Breathofthedying]

Just guessing but it looks like a whole new crop of users flocking in here. Must be doing something right... Or just helping too much.


Please Check forums for self help before "it don't work". Fizzz....

Help Data dump. http://www.ownedcore.com/forums/star...acebot-83.html

.Lucky's



Troubleshooting

• Turning bonus off for dalies is a good idea If you are Living through a mission .....and failing.
  
  
  Changing one at a time to notice the effect. A single setting can drastically improve or hurt the bot. Play around don't be afraid
  
• Game tol. Adjust the snappiness and selectivness of targeting. -# will make it find targets faster more selectively .+# will target a wider range of targets
  
• Target timer and override are also good adjustments... Amount of Ms to spend on found target. Targets move ... Lower is better to adjust and retarget. TT is built into most if not all missions. Clicking override disables the internal time.
  
• missile delay .... You want to run out of missiles ... You wat to hit things. Balance this with target timer, bonus,your missiles @ end of mission.. There are physical restrictions to time
  
• time skew/ mission delay ... Think of Drexel. (assuming proper image start) If you hit the first rock before you start the evasion - skew. After it + skew
  
• Crashing into rocks. Is a dead give away for false starts. Lowering img.tol. Is the best fix ... Change and test.
• Quit mission. Login screen. Image tol. Fail. Check settings Adjust Img tol. Up and test. CHECK AERO. Worst case may need to use you own images
• Mouse mission click select spots is100%. Improper client size/pos ... Click Resize and move Button. Adjust task bar to side if needed( small screen laptops)
• if you click mission and nothing happens Make sure Swtor is default UI
• If error on compile ... Try again
• If error on first run. Comple x86 (or your version) again
• . I have found the lowest possible GTol, ITol, TT& MDelay I can set and still pass + bonus is my personal goal for success. Find your own or copy mine with out complaining

I think that covers most..... I am sure I reversed settings... If so edit or point out so I can fix please.


Again... If the bot or any of the preceding advice mess up your porn collection / wedding video or homework it's your own fault. Don't use it! Don't cheat. Do not Use it. Go play wizzard 101

**********Format for asking for help***************

• In bot click about .... Click Sys info
• Copy and paste it to post.
• Just the facts.. What you did. What the app did. What swtor client did. Brief description ......
• Please and thank you. Go a long way.

The dev team support the public out of love for the bot and to show respect to lucky... Be polite and support them. If you get help... Donate 1$.... Support the community by passing info along and properly answering questions.



How to make a space_image for system with bad img search starts.

Warning if you erase the contents of your computer or anything stupid it is your own fault. Don't try this. Don't cheat. Play hello kitty. Don't try this!!!!

If you have any questions on how to do any step.. See warning. Above.!!!


• Open my documents
• Right click on an open area and create a new folder"space pics"
• Open swtor
• Login
If your keyboard has no prt scr key
•
Esc > pref > key bindings > Misc. Screen shot.. Secondary button >click
• Hit f12
• click [B]ok[/B
]
• Take a screen shot by hitting. PrtScr/ f12
• Open my documents/ star wars the old republic/screenshots*
• Confirm pic there
• Open lucky space bot/pictures folder
• Confirm image you need. Named. Space_imagexx. Usually 2per mission
• Start the mission press f12 when timer matches image desired.
• ( I think only 1 screen shot may be taken every 10.1sec so you may need to repeat step.
• In the my documents/ star wars the old republic/screenshots folder
• Right click on the selected screen shot> open with> paint
• Usezoom tool to blow up image to have timer huge and center view
• Use select tool to get a tight image of the desired time
• Use CropTool*
• File> save as>png Space_missionXX

Backing up
Both the space pics and my documents/ star wars the old republic/screenshots folder Contain back ups of your systems images and need to be inserted after each update
• Open my documents/ star wars the old republic/screenshots folder
• Right click. Space_missionxx. Copy
• Open Space pics
• right click on open area and select Paste
• Open lucky space bot/pictures
• right click on open area and select Paste
.
• Run bot





Installing and helper Apps

Warning if you erase you computer or anything bad happens its you own fault... don't follow these instructions. Go play Hello kitty DO NOT DO THIS!!!

Installing spacebot

SET WINDOWS THEME TO AERO
Download/update bot
Current unstable build x86(x64 is working fine atm, If you not sure what you need and are smarter enough to read this use x86)
Install Zip software if needed
Unzip into space bot folder
Create spacebot folder if needed

Download and install AutoIt
Open spacebot folder
Find the application and delete it
Highlight the AutoIt script, right click, compile script x86
Right click app, create shortcut, drag shortcut to desktop
Start star wars
Accept missions
Stand in front of centered seat
Esc , preferences , graphic setting ,1024x768 click apply keep changes
Windowed apply keep changes
Graphics quality preset low
Apply
Set interface to default

RESTART SWTOR COMPLETELY
Open bot as administrator
Options - Turn off try bonus ( for dalies or at least til settings are dialed in). Click. calibrate
Nominal = ok(on error check prev steps... still error, SOL. Check readme.txt)
Go to Mission screen and Test the missions you need for dallies(first time run through) as this will give you a hit if the mission fails.

"Before running dailies, a mission should be started from main tab. Watch the debug output and compare it with the ingame timer to make sure that it syncs.*
See section Mission start & Timer sync in Readme if there is a gap or the mission ends early."-phagotron

kbacklash*


Mine is US client, English language, and the standard is "2m 30s" as well. I had to take SS of every mission init timer to replace the default ones. Every mission works perfect once i did that.*
I found this method to fix the start search works for me best :*

**Note: i use Windows 7 , MSPaint. Other programs will work differently.
**NOTE2: make backups of the default pictures before saving the new pictures you make.

Figure out which picture is the init picture (most missions have 2-3 images). printscreen when your in-game hits the timer you need (example: space_nez_10 , when it is SUPPOSED to start the bot at (4m?) 10s, hit printscreen, it will clipboard/save the picture)

By default, swtor saves a screenshot with the printscreen button. by default, this is saved in the "x:\Users\%username%\Documents\Star Wars - The Old Republic\Screenshots" directory.*

--
*Opening reference image*
Open ms paint -*
browse to *bot location*\pictures directory and find the picture you want to replace (example, space_nez_10.png).*
It looks like a tiny rectangle right? on the bottom right corner of paint, by default, there is a magnifying glass and a slider - slide it to MAX (800%)
You can see the rulers on the top/left that show the image is 10 pixels tall by 15 pixels wide.

--
*Making new timer init pic*
Now open another copy of paint, OPEN, browse to "x:\Users\%username%\Documents\Star Wars - The Old Republic\Screenshots" and open the SS you took of the proper init time. (or just CTRL-V/paste if you printscreened to clipboard)
Take the magnifying glass/zoom and slide it to max again
scroll the picture to the top right
use the SELECT tool, and CROP the (10s) out.*
fix the size to be 15x10 and the left/top matches up with the reference image. (the right side should have part of the seconds graphic at the 15pixel range)
Save the picture as the name of the reference image
--
*Testing the mission*
Test the mission

.

--

**************************** New****************************old


*Originally Posted by phagotron *
The old version wont help you out since its not the problem. Check recommendations, set tolerance to 100, calibrate and things should work.
Thanks for your quick reply. I just read my post and realize I should have been more detailed.

v5.34 work ok for me, besides the drexel sweep type missions, I had to change the timing because it was a second too fast to miss a rock, and I also had to changed the coords and timing for when it was just about to come in view of the ship the first time to do the optional mission, what would happen is that the top of the ship would rake against the bottom of the rock that was above the ship.

v5.35preview<first one> WAS GREAT! The missions ran great, the crew ran great and many other things performed very well.

What I do:

1) change ratio from 1920x1080 to 1024x768 in game.
2) then I change to window mode with LOW graphics not very low <which is an option now>
3) Run the bot
4) The new bot auto adjusts the window now, but I still click the resize button.
5) exit the game and restart it
6) use the calibration button and it says "all things nominal" or something like that.
7) UI is set to default. Instead of using the drop down DEFAULT select, I open the UI editor to make sure everything moves that I've moved when I use the default button.
*Running win 7 x64 and have always used the aero theme. I haven't adjusted anything for my computer's UI, it's stock aero with transparency turned off.
9) I've also recompiled the .au3 file, but x64 won't compile so I have to use the x86 compile and put the .dll in the proper folder for windows

Now with the second preview of v5.35 I run into the following issues.


a)At this point 100 tolerance none of the missions will run, they will start wait for the beginning sync and then fail and exit.
b)Once I set it to 125 tolerance the missions will run but quickly fail. 1 problem I've run in to is that the ship will stop firing and only launch missles.
c)The counters don't work for me, even on a won mission it will still count a fail.
d)Trying to do the dailies doesn't work for me either, and I make sure the "do optional mission" is unchecked so that it's only trying to do the primary. I've actually tried both ways and what happens is that even if it's a win the bot will go right back to the same mission it had just done and not go on to the next daily.
e)The crew missions work sometimes and then don't work at other times.
f) running a mission at 125 tolerance in the main gui will run the mission and normally fail, but at the same time always put me at the character select screen.

My main question is, will me taking my own screen shots of the timers for each mission fix all these problems. Or is there something else going on? I have always had to run tolerance at 125 or higher<when you allowed it to go to 150> even with my own screen shots of the times.

Is there something else you would suggest me trying?*
Would me running this on a 40 in. screen be causing some of the tolerance issues?
And are the tolerance issues the main problem for what is happening?

When I get home I will run the system information tool and edit this post with my system information.

VMware

Post By -----------
My PC (Host Machine):
Intel i5-2500k
8GB Ram
Geforce 460 GTX (1GB)
Monitor is 23" w. 1920x1080
2nd Harddrive for the Virtual Machines
Win7 64bit Ultimate.

1. Buy (or leech) VMWare 8
2. Set it up like this: http://www.ownedcore.com/forums/star...ndows-7-a.html ([GUIDE] VMware 8 + Windows 7)
2.1 My Guest-Machine has 2 processors with 1 core, 2GB Memory, 60GB HDD.
2.2 Set your Windows7 x32 SP1 (with all updates) Monitor settings to 4:3 (1400 x 1050)
2.3 Make sure that in the VMWare preferences under "Display" "Autofit window" is checked and "Autofit guest" is unchecked.
2.4. Shut off the Windows UAC
2.5. Make sure the SWTOR-Folder and the spacebot-folder are not on the desktop or in the Programs folder (I made C:\Games\ as my working Directory)
2.6. Fire up SWTOR (setup for the bot) and Spacebot (out of the box), fly some rounds. Check if everything works.
3. Clone your VM. Make a full clone, not linked.
4. Start your 2nd VM with your second account :P

This is how I'm able to run 2 bots and watch movies/surf the net at the same time. I don't think this works on smaller machines, as my CPU and my Memory is working at 90% all the time.
(Testet with the german client on Polith for 24 hours)

Edit: 1400x1050 are proper 4:3 settings old one was 17" 5:4
After creating VM start it/them in Vmware-Player. Makes it much more stable.



*Originally Posted by vatoloco *
one question...will this work on laptop 1366x768 after rezising it to 1024x768?
I have heard it does work however you need to move your taskbar to the right hand side of the screen.

I know it need formatting and editing

[phagotron]

Just guessing but it looks like a whole new crop of users flocking in here. Must be doing something right... Or just helping too much.

Please Check forums for self help before "it don't work". Fizzz....

Help Data dump.

Ey all this ***** text ... reading suxx and is lame ... I just wanna know where I have to click ... lol

Its not much more than setting desktop theme to Aero and Game interface to Default.

I know. Chuck Norris would have done it with a Roundhouse Kick.

[Jevnaker]

Very good idea to minimize the game client for the screenshot, lol.

Is there any specific reason that you are using a high contrast theme?

first the desktop settigns are the standard ones has been like this since i reinstalled windows 7 from windows 8. i had to download a program to take the last pic and a new one for the pics i tried to take now and both wouldn't let me take a picture of the swtor window. it takes a picture of the area beneath it. when i choose to take a pic of the active window. even when i chose active window for some reasons my print screen doesn't work when i try to enter paint and press ctrl+v its only soem text thati used earlier today that appears. so if u either have and idea for a good print screen program for windows plz say so..

[phagotron]

first the desktop settigns are the standard ones has been liek thsi since ireinstalled windows 7 from windows 8. ihad to download a program to take the last pic and a new one for the pics i tried to take now and both wouldn't let me take a picture of the swtor window even when ichose active window for some reasons my prin scree ndoesn't work when i try to enter paint and press ctrl+v its only soem text thati used earlier today that appears. so if u either have and idea for a good print screen program for windows plz say so..

The key works fine, but you have to make sure that other apps that might change key bindings are inactive. But dont bother. Set your desktop theme to Aero and make sure that Aero service is running. (Maybe How to Turn On and Enable Aero in Windows 7 (Enable Aero Peek) may help)

Second is make sure that you are using the Default interface for the game client.

Calibrate and have fun.

ZOMG.

[ZDominus]

For the life of me i dont know how to fix this trying to level a SW got from 15 to 28 and hit a Dead End Bots working perfectly until Ezran and tazpan tazpan will run but fail due to the shuttle being destroyed (worth a shot trying it lol )

and Ezran wont even start the mission will just aim an inch to the right of the mission and iv no clue how to fix it all settings are fine

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:5 GB,free:1 GB, used:81 %
Desktop dimensions: 1280x960(32bpp, 75Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=100
HD Status=0
Timing override=1
Mission bonus=4
PSX OTT enabled=4
PSX DBG enabled=4
Last mission=Taspan Ambush
Win / Loss 0 / 0

[phagotron]

For the life of me i dont know how to fix this trying to level a SW got from 15 to 28 and hit a Dead End Bots working perfectly until Ezran and tazpan tazpan will run but fail due to the shuttle being destroyed (worth a shot trying it lol )

and Ezran wont even start the mission will just aim an inch to the right of the mission and iv no clue how to fix it all settings are fine

You may want to enable PSX OTT and disable Timing override for better mission success. Get the latest bot version, run calibrate and then try to start Ezran. Taspan mission status still is grey, meaning its unlikely to complete.

[Breathofthedying]

You may want to enable PSX OTT and disable Timing override for better mission success. Get the latest bot version, run calibrate and then try to start Ezran. Taspan mission status still is grey, meaning its unlikely to complete

For the life of me i dont know how to fix this trying to level a SW got from 15 to 28 and hit a Dead End Bots working perfectly until Ezran and tazpan tazpan will run but fail due to the shuttle being destroyed (worth a shot trying it lol )

and Ezran wont even start the mission will just aim an inch to the right of the mission and iv no clue how to fix it all settings are fine

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:5 GB,free:1 GB, used:81 %
Desktop dimensions: 1280x960(32bpp, 75Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=100
HD Status=0
Timing override=1
Mission bonus=4
PSX OTT enabled=4
PSX DBG enabled=4
Last mission=Taspan Ambush
Win / Loss 0 / 0

.

Exactly... Emp missions take some patients, and overgearing at times. Almost always bonus off....and some luck. I've done 12-27. 28-50 on several Emp toons. Hang in there.

Did I understand correct the mouse is misclicking ( to the right ) of mission map? Only Ezra?

[veklash]

I cant get the Cloud (44) empire mission to finish successfully , on my laptop . On my PC everything is fine but laptop ...

same resolution same settings made , laptop seems to have enough FPS to pull it off no problem .. it just fails short every time ... do you guys have any suggestions ?
Looking at it it feels as if its not accurately targeting the 4 main objectives on the big ship , even tried fiddling with the settings , i changed the missile launch delay but i see no difference and i end up with 40% of my missiles unused so that's weird :S

[Breathofthedying]

This is a loaded question to answer with the provided info. With out sysinfo I'd say.... Mess with laptop color / brightness....lower game tol... Slowly. ..... I think again with out more info... That is where problem sits.

[firelizard89]

I just want to again thank the devs that made this. Everything is working great for me! I followed all instructions to the t, but all I had to do was open both programs and simply click aeten defense... it works for days no problem. I am on a lapop with a 900p screen, which I thought would be a problem (it's not!!!) I've updated the bot every release to see if any of them had problems, and so far the only difference is that the missions now start faster than before. Every now and then it crashes on lower level missions, but a restart fixes it.