[Open Source] Lucky's Spacebot

[Breathofthedying]

A good sign you bot too much is if you don't have the comms for you 25 35 45 peices. And need to farm lower missions for them. Less then a week to1- 50 and was not rushing by any means.
Rep side bot got a lot of love.

[DirtFarmer]

Hello folks! I spent some time trying to get this to work on my trooper. After some adjustments, I was able to run Archenar Interception once. When it restarts the mission it becomes unresponsive (no movement or firing). I stopped and restarted everything and ran into the same issue again.

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:3 GB, used:50 %
Desktop dimensions: 1280x1024(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=117
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=1
Last mission=Archenar Interception
Win / Loss 1 / 0

[WiZ22]

i am on windows 7 aero well atleast it says thats whats it on.

[WiZ22]

What windows theme are you using?

i am on windows 7 aero well atleast it says thats whats it on.

[TMichael]

Hello folks! I spent some time trying to get this to work on my trooper. After some adjustments, I was able to run Archenar Interception once. When it restarts the mission it becomes unresponsive (no movement or firing). I stopped and restarted everything and ran into the same issue again.

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:3 GB, used:50 %
Desktop dimensions: 1280x1024(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=117
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=1
Last mission=Archenar Interception
Win / Loss 1 / 0

Hi Dirt,

Try the following:

A) Uncheck PSX debug enabled
B) Run Makem Te instead of Archenar - it has a much higher success rate
C) Make sure the timer syncs correctly when the mission starts

Good luck!

EDIT

D) Try it with HD enabled

[DirtFarmer]

I gave those suggestions a try. The bot will complete the first mission but becomes unresponsive once the 2nd mission begins. After a reboot I ran it again and watched the Spacebot events at the bottom. It's failing on the mission start image. I'll bump up the tolerance and go again. Ty for the feedback earlier!

[phagotron]

Hello folks! I spent some time trying to get this to work on my trooper. After some adjustments, I was able to run Archenar Interception once. When it restarts the mission it becomes unresponsive (no movement or firing). I stopped and restarted everything and ran into the same issue again.

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:7 GB,free:3 GB, used:50 %
Desktop dimensions: 1280x1024(32bpp, 60Hz)
Desktop theme: High contrast using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=117
HD Status=0
Timing override=4
Mission bonus=1
PSX OTT enabled=1
PSX DBG enabled=1
Last mission=Archenar Interception
Win / Loss 1 / 0

Set your desktop theme to Aero and make sure the Aero service is running.

[nickego]

very very very odd. AND I CANT BELIEVE im suggesting this... try pulling out your converter adn exchanging ... im sure its covered..... but semi seriously take it out and put it back it. CHeck every setting.. including anything on your system that can take control of screen and color settings. VNC or VPN software like team viewer or logmein everywhereplapy.

I need to reread all posts to get a bigger feel for your issues... my interest is peeked(peaked)... Im a poor speller and typest besides being moody.

Hey Breath
Okay after a few days of restarting and trying everything I thought I have done the times it has worked and I am still pulling out my hair
Everything works except the damn energy converter (all of my toons on all my missions it seems) if I get it to work it works on all the toons
So I am doing something wrong
And I am going crazy trying to figure out what is causing the issue.
I have tried all the things you have suggested.
I will repost my sysinfo and anything else you can suggest would be awesome

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:3 GB,free:1 GB, used:57 %
Desktop dimensions: 1366x768(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x742
SWTOR Window:0,8 Win size:1040x780

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Aeten Defense
Win / Loss 0 / 0

[darkone23]

this means you need to set the Image Tolerance up by 1 until the mission starts. under the ABOUT tab Press SYSINFO and Post it, It helps figure out what is wrong. Class and mission dont hurt. ^^

ok i'm having the same problem BUT on only some of the missions, but when I try to go past 113 for img tolerance it says I need to reset my client UI to default and try to calibrate again(as I calibrate everytime i bump it one) should i not calibrate and just bump the tolerance up oneto try the missions? and them my question is once the other missions start working(if they start working) will the lower tolerance ones be affected?
the missions are Jaaval, Balasor, Kovor, Archenar all others work fin 99% of the time
Luckys Spacebot v5.35 x86 (R227)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:4 GB, used:42 %
Desktop dimensions: 1360x768(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x742
SWTOR Window:0,24 Win size:1040x780

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=110
HD Status=0
Timing override=4
Mission bonus=4
PSX OTT enabled=4
PSX DBG enabled=4
Last mission=Archenar Interception
Win / Loss 0 / 0

[DirtFarmer]

Set your desktop theme to Aero and make sure the Aero service is running.

hmm, swtor keeps disabling Aero when it launches. Trying to work around that now.

A compatibility setting that I had enabled on SWTOR a while back. Fixed and now the missions restart.

Thank you all for your help

[TMichael]

Hey Breath
Okay after a few days of restarting and trying everything I thought I have done the times it has worked and I am still pulling out my hair
Everything works except the damn energy converter (all of my toons on all my missions it seems) if I get it to work it works on all the toons
So I am doing something wrong
And I am going crazy trying to figure out what is causing the issue.
I have tried all the things you have suggested.
I will repost my sysinfo and anything else you can suggest would be awesome

Luckys Spacebot v5.35 x86 (R219)

System details: X64 CPU, WIN_7(X64)
RAM total:3 GB,free:1 GB, used:57 %
Desktop dimensions: 1366x768(32bpp, 60Hz)
Desktop theme: Aero using NormalSize, NormalColor, 96dpi

SWTOR Client is running with 1024x742
SWTOR Window:0,8 Win size:1040x780

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=4
Last mission=Aeten Defense
Win / Loss 0 / 0

Because your desktop is set to 1366x768, the SWToR window is actually compacting to a height of 742, which affects click precision. I had this issue on the wife's system, which had a max height of 768. For some reason, Autoit/Windows will only calculate an extra 12 pixels off screen when the resolution falls short.

If you're unable to increase your desktop height, I'm only aware of one (extreme) solution. Install VMWare Workstation, set it up using Windows 7 x32 per the instructions on page 19(?) of this thread, and run the game there. The VM actually allows for very large resolutions on any monitor, scrolling down or right as needed. And as an added bonus, this allows you to do other stuff while the bot runs.

Let us know if this works for you.

[nickego]

Because your desktop is set to 1366x768, the SWToR window is actually compacting to a height of 742, which affects click precision. I had this issue on the wife's system, which had a max height of 768. For some reason, Autoit/Windows will only calculate an extra 12 pixels off screen when the resolution falls short.

If you're unable to increase your desktop height, I'm only aware of one (extreme) solution. Install VMWare Workstation, set it up using Windows 7 x32 per the instructions on page 19(?) of this thread, and run the game there. The VM actually allows for very large resolutions on any monitor, scrolling down or right as needed. And as an added bonus, this allows you to do other stuff while the bot runs.

Let us know if this works for you.

Hey thanks for the input
I actually have my laptop run through my TV so the Resolution is set to 1600-900. I don't know why it said the other one.
Interesting.

[goniukas]

hey guys. I've been stuck on republic lvl40 mission Drexel Sweep. It says it should be doing 100% but what I am getting is 100% fail rate:/ what appears to be happening is I get shot down or don't get enough kill. Mostly I get shot down right after I fly by that imp ship. Anyone having same problems? Any solutions to this? I've got all ship mods for the level.

Luckys Spacebot v5.35 x86 (R221)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:3 GB, used:55 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Custom

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=1

[darkone23]

hey guys. I've been stuck on republic lvl40 mission Drexel Sweep. It says it should be doing 100% but what I am getting is 100% fail rate:/ what appears to be happening is I get shot down or don't get enough kill. Mostly I get shot down right after I fly by that imp ship. Anyone having same problems? Any solutions to this? I've got all ship mods for the level.

Luckys Spacebot v5.35 x86 (R221)

System details: X64 CPU, WIN_7(X64) Service Pack 1
RAM total:7 GB,free:3 GB, used:55 %
Desktop dimensions: 1920x1080(32bpp, 60Hz)
Desktop theme: Custom

SWTOR Client is running with 1024x766
SWTOR Window:0,0 Win size:1040x804

On Target Time=50
Missile Delay=333
Timer Skew =50
IMG Tolerance=106
HD Status=1
Timing override=4
Mission bonus=4
PSX OTT enabled=1
PSX DBG enabled=1

this is one of the missions that is working but having the same problem but its not 110% its only about 80% fail

[mostannoyedone]

So I am having problems with Kalee Fortification, the first time I started it I got a 5-0 streak then I had to restart SWTOR, got 1-5 and ever since then I am having problems, it either switches to shield with the power consumption thingy and tries to kill stuff with shield switched on which leads to no shield(shields are not regenerating while lasers are firing...) at all and low power on the lasers = dying with doing nothing, or doesnt kill enough ships to complete the mission.... I have all the epic upgrades except the rockets cuz I am still 48 level, I also have EMP.. so what is wrong again...

Btw is the bot "trained" to use that WEP or whatever it was the thingy that makes u untargetable for 10 seconds, is it worth going for it?

I'm not sure if your problem is fixed or not, but what happened to you happened to me a few times. What was happening to cause my problem is SWTOR reset my graphics to medium. All the other missions still worked but kalee would fail a lot. I would then set the graphics to where they need to be, low. I've now gotten in the habit of checking that setting before I start the bot. Also make sure you have all the upgrades except proton torpedoes. Do not mount the proton torpedoes.