Originally Posted by
lamafao
For NewStats.CT :
Enter a castle and tick "Turn this ON" then you should see the addresses. You have to create your own hotkeys for all the stuff you want to use.
You have to refresh(disable/enable) "Turn this ON" script every time you enter a new castle to see new good addresses.
If "Currently Using" pointer doesn't work do:
1.Click on "More Pointers"
2.Choose one that works(Have to be inside a castle,value is usually ~15000-20000), delete the old one and drag the new one to the same place.
3.Double click on the <script>. Right click on a new pointer > Change record > Address > Change the line in the script as shown below
4.Click OK and you are done.
For Hotkeys:
1.Right click on an address > Set/Change Hotkeys > Create 2 hotkeys with any key you want.
2.1st with Toggle Freeze and press Apply, 2nd with Set Value to : FF4D (Or any other value) press Apply and press OK. (Both keys should be the same unless you want to press 2 keys for this to work). Im not sure if you need toggle freeze hotkey but you can do it just to be sure.
3.Done
Some tips on values:
Most of them i change to FF4D but not these:
Movement Speed: FF40 Fast, FF41 Very fast, FF4D Crazy.
Attack Speed: FF40 Might be better with a knight or even lower, depending on what weapon you use.
If you are gonna use HP Regen : You wont die from mobs/traps with hp regen on FF4D but you will die at the end of the castle(After smashing the door and entering treasure room) so make sure you change it back to 00 00 before entering.
Removed NoCD.CT because it crashed for 99% of the players.