Made my private server public and all, but realm isnt showing up?$5 paypal for answer

[Envoke]

I got a dedicated server and downloaded ArcEMU repack and got everything setup in MySQL and im using NaviCat to handle the database. I set up realms.config in the ArcEMU config folder.. what do u think the problem is?

not sure if im allowed to hand out money for answering a question, if im not, sorry im new here.

[Illegalpie]

Check Config FIles For me on Theos Funserver he edited them to show you where to put them to public it with your hamachi check all of them and set it anywhere it might be rong to 127.0.0.1

[Envoke]

Check Config FIles

Which one? realms.confg?

here is the text copied from that file, see anythign wrong?

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision rev.1564
#######################################################################

#********************************************************************************
#* How to use this config file:                                                 *
#* Config files are in a block->variable->setting format.                       *
#* A < signifies the opening of a block, the block name is expected after that. * 
#* After the block name, a space and then the settings sperated by = / ' '.     *
#*                                                                              *
#* e.g.                                                                         *
#* <block setting="0" someval = "1">                                            *
#*                                                                              *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
#* of the line, or in shell format (#).                                         *
#********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#      The address (no port) of the server.
#
#    Port:
#      The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#      Not really relavant, but name the logon.
#
#    RealmCount:
#      The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "logon.chronicwow.org"
	Port = "3389"
	Name = "logon"
	RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#      The name of the realm.
#    
#    Address:
#      The address (and port) of that realm.
#
#    Icon:
#      The type of realm (PVP, Normal, RPPVP, RP)
#
#    TimeZone:
#      The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
#       5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
#    Population:
#      (0 = low, 1 = medium, 2 = high)
#
#   Important information below
#
#     change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
#     This issues come up a lot!
#
# 	Timezone values :
#	0=Korean				16=China
#	1=Development				17=CN1
#	2=United States				18=CN2
#	3=Oceanic				19=CN3
#	4=Latin America				20=CN4
#	5=Tournament				21=CN5
#	6=Korean				22=CN6
#	8=English				23=CN7
#	9=German				24=CN8
#	10=French				25=Tournament
#	11=Spanish				26=Test Server
#	12=Russian				27=Tournament
#	13=Tournament				28=QA Server
#	14=Taiwan				29=CN9
#	15=Tournament				30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "ChronicWoW Server"
	Address = "logon.chronicwow.org:8129" 
	Icon = "PVP"
	Population = "1.0"
	TimeZone = "1">

[Illegalpie]

Ya change Logonserver Address to 127.0.0.1 THEN follow any guides before you change it because you cant change it like that you g2 leave it for now like you change it to an IP not the logon change it to 127.0.0.1 and there will be your realms heres a copy of mine
#################################################################
# ArcEmu Realms Configuration File #
# Last updated at rev.1875 #
# Keazain`s X-Pack Release - Compiled by Keazain #
#################################################################

#******************************************************************************* *
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#******************************************************************************* */

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Spawnwed WoW's Insanity Funserver V2"
Address = "127.0.0.1:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

[Illegalpie]

did it fix it?

[Envoke]

did it fix it?

no i changed the ip to 127.0.0.1 but nothing showed up when i log on... not sure if thsi would affect anything but when i run arcemu-world.exe it always sticks on something... like N Storage: 877 entries loaded from table quests

[Envoke]

hey do u have MSN? if u do msg me my name is [email protected]

[Illegalpie]

heres a copy of all of mine Realms:#################################################################
# ArcEmu Realms Configuration File #
# Last updated at rev.1875 #
# Keazain`s X-Pack Release - Compiled by Keazain #
#################################################################

#******************************************************************************* *
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#******************************************************************************* */

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Spawned WoW's Insanity Funserver V2"
Address = "127.0.0.1:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">
Logonserver:# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "1"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "change_me_world"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">
World:
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
# This should be set to 'gm_sync_channel' for the My_Master addon to work.
# Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain & Collision Settings
#
# Set the path to the map_xx.bin files and whether unloading should be enabled
# for the main world maps here. Unloading the main world maps when they go idle
# can save a great amount of memory if the cells aren't being activated/idled
# often. Instance/Non-main maps will not be unloaded ever.
#
# Default:
# MapPath = "maps"
# vMapPath = "vmaps"
# UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps"
vMapPath = "vmaps"
UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
#
# Cheaters:
# This directive sets up the cheater logging file, if turned on any
# cheat / packet exploit / speedhack attempts will be logged here.
#
# GMCommands:
# These two directives set up the GM command logging fie. If turned on,
# most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
# These directives control the limits and behaviour of the ingame mail system.
# All options must have Mail prefixed before them.
#
# ReloadDelay
# Controls the delay at which the database is "refreshed". Use it if you're
# inserting mail from an external source, such as a web-based interface.
# 0 turns it off.
# Default: 0
#
# DisablePostageCostsForGM
# Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
# Default: 1
#
# DisablePostageCosts
# Disables postage costs for all players.
# Default: 0
#
# DisablePostageDelayItems
# Disables the one hour wait time when sending mail with items attached.
# Default: 1
#
# DisableMessageExpiry
# Turns off the 30 day / 3 day after read message expiry time.
# WARNING: A mailbox still cannot show more than 50 items at once
# (stupid limitation in client).
# Default: 0
#
# EnableInterfactionMail
# Removes the faction limitation for sending mail messages. Applies to all players.
# Default: 1
#
# EnableInterfactionMailForGM
# Removes the faction limitation for sending mail messages, but only applies
# to GM's. EnableInterfactionMail overrides this.
# Default: 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
DisablePostageCostsForGM="1"
DisablePostageCosts="1"
DisablePostageDelayItems="1"
DisableMessageExpiry="1"
EnableInterfactionMail="1"
EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
# These directives set up the status dumper plugin. Filename is an
# absolute or relative path to the server binary. Interval is the
# time that the stats will be dumped to xml.
# Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
# Preloading
# This directive controls whether the entire world will be spawned at server
# startup or on demand. It is advised to leave it disabled unless you are a
# developer doing testing.
# Default: off
#
# Background Loot Loading
# This directive controls whether loot will be loaded progressively during
# startup or in the background in a seperate thread. Turning it on will
# result in much faster startup times.
# Default: on
#
# Multithreaded Startup
# This controls whether the server will spawn multiple worker threads to
# use for loading the database and starting the server. Turning it on
# increases the speed at which it starts up for each additional cpu in your
# computer.
# Default: on
#
# Additional Table Binding
# You can load static item/creature/etc data into the server using this directive.
# This way throughout database updates your custom data can be preserved.
# Format: "sourcetable destination table,sourcetable destinationtable"
# Example: "myitems items,mynpcs creature_names"
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"
BackgroundLootLoading = "1"
EnableMultithreadedLoading = "1"
LoadAdditionalTables="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
# Lines
# This is the number of "messages" or lines that it will allow before stopping messages from
# being sent. This counter is reset every "Seconds" seconds.
# Default: 0 (disabled)
#
# Seconds
# This is the number of seconds inbetween the Line counter being reset.
# Default: 0 (disabled)
#
# SendMessage
# If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
# message will be sent upon flood triggering.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
# DisablePings
# This directive controls whether pings will be sent to the logonserver to check
# if the connection is still "alive". Expect problems if it is disabled.
# Default: 0
#
# RemotePassword
# This directive controls the password used to authenticate with the logonserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
RemotePassword = "change_me_world">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup
#
# Teleport
# This directive controls anti-teleport hack checks will be enabled or not.
# Default: 1
#
# Speed
# This directive controls anti-speed hack checks will be performed on player movement or not.
# Default: 1
#
# SpeedThreshold
# This directive controls the threshold at which the speedhack detection will trip.
# It's (characters' move time of distance - real move time of distance)
# Default: -600.0
#
# FallDamage
# This directive controls anti-fall damage hack checks will be performed on player movement or not.
# Default: 1
#
# Flying
# This directive controls whether flight hacks will be performed on players or not.
# Default: 1
#
# FlightThreshold
# This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
# Default: 10
#
# DisableOnGM
# This directive controls hack checks will be disabled for GM's or not.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="1"
Speed="1"
FallDamage="1"
Flight="1"
FlightThreshold="10"
DisableOnGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Period Setup
#
# These are the periods that the server will wait before doing periodic duties. At the moment only
# arena point calculation and honor point calculation are used here.
#
# Default:
# Arena: weekly
# Honor: daily
# (blizzlike values)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"
ArenaUpdate="weekly"
DailyUpdate="daily">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channels Setup
#
# These directives control some of the aspects in the channel system.
#
# BannedChannels
# If you would like to ban users from creating or joining a channel specify them here in a ';'
# seperated list.
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# VoiceChat Setup
#
# These directives control some of the aspects in the voice chat system.
#
# Enabled
# If you want to enable the voice chat system, this must be set to 1.
# Default: "0"
#
# ServerIP
# This is the IP of the voice chat server.
# Default: "127.0.0.1"
#
# ServerPort
# This is the TCP port of the voice chat server.
# Default: "3727"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"
ServerIP="127.0.0.1"
ServerPort="3727">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remote Console Setup
#
# These directives control the remote administration console.
#
# Enabled
# If you want to enable the remote administration console, set this.
# Default: 0
#
# Host
# This is the interface the RA server listens on.
# Default: "0.0.0.0"
#
# Port
# This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
# Default: 8092
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<RemoteConsole Enabled="0"
Host="0.0.0.0"
Port="8092">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Scripting Engine Setup
#
# ArcEmu can support multiple script backends via the means of loading .dll files for them.
# This section in the config can enable/disable those backends.
#
# LUA
# If you would like to enable the LUA scripting backend, enable this.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ScriptBackends LUA="1"
AS="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Movement Setup
#
# NOTE: For any of these directives to function, movement compression has to be compiled into
# the server.
#
# FlushInterval
# This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
# If you have a high threshold, keeping this at 1-2 seconds will work better.
# Default: 1000 (one second)
#
# CompressionRate
# This is the deflate compression rate. Higher will use more cpu, but smaller packets.
# Range: 1-9 (or 0 is disable)
# Default: 1
#
# CompressionThreshold
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. It is advised to keep it at least 30 units. This value is used for players.
# Default: 30.0
#
# CompressionThresholdCreatures
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. This value is used for creatures, so it can be a lot lower.
# Default: 10.0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Movement FlushInterval="1000"
CompressRate="1"
CompressThreshold="30.0"
CompressThresholdCreatures="10.0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Localization Setup
#
# LocaleBindings
# This is a list of locale names and the other locale you want to associate with them.
# For example, to make the European client always use the french language, "enGB=frFR"
#
# Must be terminated by a space.
#
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Localization LocaleBindings="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Dungeon / Instance Setup
#
# TakeGroupLeaderID
# If a player doesn't have an instance id, the group isn't already assigned
# to an instance and the group or raid leader already have one, the player will
# be bound to the instance id of the group/raid leader.
# Default: 1 (enabled)
#
# SlidingExpiration
# If enabled, persistent instances will expire relative to the creation time.
# Otherwise persistent instances will expire at fixed points of time. (blizz like)
# Default: 0 (disabled)
#
# DailyHeroicInstanceResetHour
# Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
# Default: 5
#
# CheckTriggerPrerequsites
# Entering & checks
# Default: 1
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<InstanceHandling TakeGroupLeaderID="1"
SlidingExpiration="0"
DailyHeroicInstanceResetHour="5"
CheckTriggerPrerequsites="1" >


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# BattleGround settings
# Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
#
# AlteracValley
# AV_MIN
# AV_MAX
#
# ArathiBasin
# AB_MIN
# AB_MAX
#
# WarSong
# WS_MIN
# WS_MAX
#
# Eyes Of The Storm.
# EOS_MIN
# EOS_MAX
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Battleground AV_MIN="0"
AV_MAX="40"
AB_MIN="4"
AB_MAX="15"
EOS_MIN="4"
EOS_MAX="15"
WS_MIN="2"
WS_MAX="10" >

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartOnGMIsland
#
# Makes GM Characters start on GM Island
#
# Also sets their bind location to GM Island
# Default:1 (Yes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<GameMaster StartOnGMIsland = "0">
Rest arnt important

[Illegalpie]

Bed GL with your realm!