LATM's 1920 DH - 23 Open - 11.4 Closed ~500k/hour + Items + Others

[Strife0911]

right when it goes in the cellar it attacks the wall . any idea whats the fix for this? i have 25% ms

Change your middle door time i believe it is. Make is higher.

[vq350de14]

get some discilin on quiver.. you probably dont have enough disc to smokescreen in cellar

roger that i will try it

[Lawlietx]

Just installed latest Version, everything is working fine except looting Gems.
Using 1980 res didnt changed anything.

Did read the solution on the earlier page, first of all do i really have to take new screens since i use the same res + options?
If yes, how do i do it?

Didnt find the tolerance rate to try it out with "70"

[LATM]

Just installed latest Version, everything is working fine except looting Gems.
Using 1980 res didnt changed anything.

Did read the solution on the earlier page, first of all do i really have to take new screens since i use the same res + options?
If yes, how do i do it?

Didnt find the tolerance rate to try it out with "70"

it only loots emeralds unless u make your own custom loot picture in the fashion of the others

in gui its flawlesssquare|40, change to 70. unless already 70, in which case...tell me if its getting emeralds

get some discilin on quiver.. you probably dont have enough disc to smokescreen in cellar

please don't answer peoples questions when u don't know the right answer. I know you were trying to be helpful but u just made him buy a piece of gear for no reason [if he did already]

i have always the same problem and can not solve this..
after checking loot when i want to start salvaging ( i guess)
it puts my bracers in stash and stops.. there are no screenshots in "start" tho in "cellar"
increased loadtime to 5sec.. no changes.. i have a fast system with ssd so where is the problem?
thanks

prob not using default keys, get back to me if this was the case.

right when it goes in the cellar it attacks the wall . any idea whats the fix for this? i have 25% ms

... read the pages. Can't answer this one again.

ok well im having aproblem at the status bar, it says it cannot find resume button, and then it syas old tristram etc etc, how do i fi this>

prob cause wrong resolution or wrong language.

I'm pretty sure AngryCoder was looking in to trying to get it to work with a lower res. Pretty sure he found the lines that need to change to get it work, it's just a matter of testing. I adjusted BlakSack's script to work with res 1280x720(for monk only) and that wasn't too difficult after a little testing.

Blacksack's ilvl shit might as well be a different species if I had to expain how different it was.

[Rakurai]

I apologize if this is a misunderstanding on my part, but it appears that on (about) lines 755 and 759 (the first two movement clicks), they should be using x_ratio instead of y_ratio in the second argument to the click functions. It wouldn't matter if you're using a 16:9 resolution, but could mess up if someone was trying to implement this in 4:3 or 16:10. Unless there is a reason this is the case for the narrowed field of view in 4:3?

EDIT: Also, in both cases where the script can pause to prevent salvaging or vendoring your eq by mistake, it calls TogglePause before it changes the status line in the GUI. Not a big deal, just made me hunt through the script for wtf could pause it when it happened to me.

[chaosteng]

well it cant be the resolution because i am using a 1920x1080. Wrong language? Getting frustrated pulling my hair out lol. Me and my buddy went through the steps together, and we did exact same thing, and he got his working and mines not..

[Lawlietx]

Just run the bot for the case when an flawless emerald drops, it wouldnt pick it up.

As i mentioned 1980 res, nothing changed. Its looting tomes btw

The tolerance is 70

[chancity]

Heres the fix to salvaging, should work on all 16:9 resolutions now with the proper pictures! Enjoy guys and don't forget to show me some love with some rep..

Func AnalScan()
    GUICtrlSetData($lblStatus, "Status: Unhighlighting new items")
    For $i = 0 To 9
      For $j = 0 To 5
      MouseMove(Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio), 1)
      Next
   Next
EndFunc

 Func AnalLoot()
	DebugLog(@CRLF & "****************************************************" & @CRLF  & _
	"iLvl Analyzing " & @CRLF & _
	"****************************************************")
	GUICtrlSetData($lblStatus, "Status: Stashing And Analyzing Loot")
	AnalScan()
	ArrayClear($AnalyzedLoot)	
	$rt = TimerInit()
	
	
	For $i = 0 To 9
			   For $j = 0 To 5
	  $SlotPixelLine = PixelSearch(Round(($slotLineTopX + $i * $offset) * $x_ratio), Round(($slotLineTopY  + $j * $offset) * $y_ratio), Round(($slotLineBotX + $i * $offset) * $x_ratio), Round(($slotLineBotY + $j * $offset) * $y_ratio), 0x2C1B14,1)
	  $MiddleOfCell = PixelSearch(Round(($CellMiddleTopX + $i * $offset) * $x_ratio), Round(($CellMiddleTopY  + $j * $offset) * $y_ratio), Round(($CellMiddleBotX + $i * $offset) * $x_ratio), Round(($CellMiddleBotY + $j * $offset) * $y_ratio), 0x130C08)
  
  If Not IsArray($MiddleOfCell) Then
	  If IsArray($SlotPixelLine) Or $slotError >= 1 Or $j = 0 Then
		 $slotError  = 0
	  MouseMove(Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio),1)
      Sleep($AnalSpeed)
	  $ItemInfo = StringSplit(GetItemInfo(), ",")

	  If StringRegExp($ItemInfo[1],"Magic")  Then
	  DebugLog("Magic Item Found iLvl=" &$ItemInfo[2]&" @ Cell " & $i & "," & $j)
	   
		 If $ItemInfo[2] < 0 Then
			$AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Vendor,Magic," & $ItemInfo[2]
			$AnalVendor = 1
		  Else
			If $ItemInfo[2] >= $MagicStashiLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Stashing Magic @ " & $i & "," & $j)
			   $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Stashed,Magic," & $ItemInfo[2]
			   MouseClick("Right", Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio), 1)
			   
			Elseif $ItemInfo[2] <= $MagicSalvageiLvl And $ItemInfo[2] > $MagicVendoriLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Salvaging Magic @ " & $i & "," & $j)
			   $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Salvage,Magic," & $ItemInfo[2]
			   $AnalSalvage = 1
			   
			Elseif $ItemInfo[2] <= $MagicVendoriLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Vendoring Magic @ " & $i & "," & $j)
			   $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Vendor,Magic," & $ItemInfo[2]
			   $AnalVendor = 1
			   
			EndIf
		 EndIf
	  ElseIf StringRegExp($ItemInfo[1],"Rare") Then
		DebugLog("Rare Item Found iLvl=" &$ItemInfo[2]&" @ Cell " & $i & "," & $j)
	   
		 If $ItemInfo[2] < 0 Then
			$AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Vendor,Rare," & $ItemInfo[2]
			$AnalRareIdentify = 1
			$AnalVendor = 1
			
		  Else
			If $ItemInfo[2] >= $RareStashiLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Stashing Rare @ " & $i & "," & $j)
			   MouseClick("Right", Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio), 1)
			   
			Elseif $ItemInfo[2] <= $RareSalvageiLvl And $ItemInfo[2] > $RareVendoriLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Salvaging Rare @ " & $i & "," & $j)
			   $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Salvage,Rare," & $ItemInfo[2]
			   $AnalRareIdentify = 1
			   $AnalSalvage = 1
			   
			ElseIf $ItemInfo[2] <= $RareVendoriLvl Then
			   GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Vendoring Rare @ " & $i & "," & $j)
			   $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Vendor,Rare," & $ItemInfo[2]
			   $AnalRareIdentify = 1
			   $AnalVendor = 1
			   
			EndIf
		 EndIf
	  ElseIf StringRegExp($ItemInfo[1],"Set") Or StringRegExp($ItemInfo[1],"Legendary") Then
		 DebugLog($ItemInfo[1] & " Item Found iLvl=" &$ItemInfo[2]&" @ Cell " & $i & "," & $j)
		 GUICtrlSetData($lblStatus, "Status: " & $ItemInfo[2] & " Stashing " & $ItemInfo[1] & " @ " & $i & "," & $j)
		 $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Stashed,Set/Legendary," & $ItemInfo[2]
		 MouseClick("Right", Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio), 1)
	  
   ElseIf StringRegExp($ItemInfo[1],"Crafting") Or StringRegExp($ItemInfo[1],"Tomes") Or StringRegExp($ItemInfo[1],"Gem") Or StringRegExp($ItemInfo[1],"Tome") _
	  Or StringRegExp($ItemInfo[1],"RareRing") Or StringRegExp($ItemInfo[1], "RareAmmy") Or StringRegExp($ItemInfo[1], "BlackSmithPlan") Then 
	 DebugLog($ItemInfo[1] & " @ Cell " & $i & "," & $j)
     GUICtrlSetData($lblStatus, "Status: Stashing " & $ItemInfo[1] & " @ " & $i & "," & $j)
     $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Stashed," &$ItemInfo[1]& ",0"
	 MouseClick("Right", Round(($slot1x + $i * $offset) * $x_ratio), Round(($slot1y + $j * $offset) * $y_ratio), 1)
	 
   ElseIf $ItemInfo[1] = 0 Then
		 DebugLog("Unknown Item Found iLvl=0 @ Cell " & $i & "," & $j)
		 GUICtrlSetData($lblStatus, "Status:  Vendoring Unknown @ " & $i & "," & $j)
  	     $AnalyzedLoot[$i][$j] = Round(($slot1x + $i * $offset) * $x_ratio) & "," & Round(($slot1y + $j * $offset) * $y_ratio) & ",Vendor,Unknown,0"
		 $AnalVendor = 1
  Else
	  $slotError += 1
    EndIF	 
   EndIf	
 EndIf
	  If CheckFullStash() = 0 Then ExitLoop
	  Next
   Next
   $srt = TimerDiff($rt)
   $AnalTime = Round($srt / 1000, 2)
   DebugLog(@CRLF & "iLvl Analyzing took " & $AnalTime & " Seconds" & @CRLF & _
	"****************************************************")
 EndFunc   ;==>AnalLoot

[Rhynocerous]

well it cant be the resolution because i am using a 1920x1080. Wrong language? Getting frustrated pulling my hair out lol. Me and my buddy went through the steps together, and we did exact same thing, and he got his working and mines not..

x64?
Your image search isn't working, try these steps in order.
1) Make sure you are running x64
2) Re-install the image search functions
3) Install AutoIt as x84 and try again. (Still run the script as x64)

I see that there should be an error popup if you are not running it as x64 and should be though.

[LATM]

x64?
Your image search isn't working, try these steps in order.
1) Make sure you are running x64
2) Re-install the image search functions
3) Install AutoIt as x84 and try again. (Still run the script as x64)

I see that there should be an error popup if you are not running it as x64 and should be though.

His picture is stretched. I don't think 1920x1080 [16:9] is his monitor's native resolution or aspect ratio.

Chaosteng, confirm/deny?

[Lawlietx]

His picture is stretched. I don't think 1920x1080 [16:9] is his monitor's native resolution or aspect ratio.

Chaosteng, confirm/deny?

Just ran the bot for the case when an flawless emerald drops, it wouldnt pick it up.

As i mentioned 1920 res, nothing changed. Its looting tomes btw

The tolerance is 70

PS: Sorry for beeing impatient, have to get up at 6 am ^^ - wanna set up the bot to give you valid data tomorrow

[LATM]

Just ran the bot for the case when an flawless emerald drops, it wouldnt pick it up.

As i mentioned 1920 res, nothing changed. Its looting tomes btw

The tolerance is 70

PS: Sorry for beeing impatient, have to get up at 6 am ^^ - wanna set up the bot to give you valid data tomorrow

happens. happens more frequently if templar or weird text is behind it. working on a solution, might just be a new screenshot

Version 4 Released. Fixes issues for non 1920x1080 users.

I still need screenshots for 1600:900 and the other one. If you took them, please rar them and send them to me

[chaosteng]

i can confirm my screen resolution is a 1920x1080

[LATM]

i can confirm my screen resolution is a 1920x1080

yikes. ... ... ...

Let me think and get back to you

[chaosteng]

yeah iv reinstalled everything multiple times, iv copied paste the 1020x1080 res images into the folder with the .au3 files. Still no go. Did multiple remakes of the checkpoints and presse the start button after i ran through the check points. Nada