[Goldfarming] [Witch Doctor] [AutoIT] ACT 1 Cellar Farming Bot

[liquidsystem]

i have still this problem...
Attachment 8330

use win7 64x
800x600
and yes iam a which doc..

he does everything right...
but after some games...i got this message

Which version are you using for the bot?

[andygongyb]

where i can find 0.4? will try v5 is unstable for me i dont know my char is pressing in the cellar the attack move on 3 and then the voodoo after that it runs straigt into the mobs and dies

1. I asked avatar to put v0.4 back, but he hasn't replied yet
2. Did you turn on monster health bar?

[andygongyb]

Guys the bot works perfect except that it does not loot gems and also dont sell/repair the blue ones i have made everything step by step cant find a solution! i'm using 0.5 version! If you have any advice would be welcome!

Try putting the DLL to where you run the compiled exe

[andygongyb]

Im trying to get this up, but with your character build, u have 2 voodoo, we cant pick two voodoo, and how do i assign one of my skills with my left mouse pointer, any1?

Where did you find the build? I didn't see any of the builds we posted has two Voodoo

[andygongyb]

I think I'm needing some help please.
So i have done everything in the instructions, put the dll's where they are suppose to be, $pngLoc[0] = "C:\Program Files\Diablo III\pics\1920x1080\" is the location of the pics and how it is in the script. I'm running 1920x1080 full screen windowed, with all graphic effects on off/low, however it is not running smoothly at all. It doesn't seem to find the cellar even though it is open, sometimes the cursor goes over the door when its open but my character does is act like it didn't find the cellar and continues to leave the game.
Also it seems like depending on the zombies in front of him before second movement and going around them will effect where he ends up on third movement causing the bot to get the cellar roughly 30% of the time. I have tried adjusting the movement locations and trying to narrow them down a bit but even still it depends a lot on where he ended up on the third movement.

Just for reference i am doing this with a Wizard running on Hell. I don't know if playing a wizard is whats screwing things up, but I've read that it doesn't matter, just the spells will be different.

Wizard does have problem in the movement since it does not have Spirit Walk, which prevent monster disrupting. You can tweak the movement with teleport, but that may require quite a lot of testing.

[andygongyb]

I havent really checked this when i am awake. I seem to be having this problem since <0.5 or whatever versions. When i leave my pc running overnight, I wake up with a disconnection error and on the background i see my character dead. I cannot determine where my character died but I'm assuming its not resetting itself to revive or something. Just rather weird

Auto reconnection is implemented since v0.5 Please check if you run the compiled exe with admin privilege

[andygongyb]

Script works 90%

picks up gems, sells items with full inventory, runs and kills great, but...

Does not stash yellows. (i never seem to take damage so the repair aspect of the bot is unconfirmed). How do i fix it?

Im running x86, 1920x1080 window fullscreen, running with admin privilegies, dlls are both in system32 and in same file as script exe(just to be sure), running beta 0.6.


Also, request a picture of flawless to put in place of the uare.png does anyone have that and can attach it here?

Love u guys

Edit: dont know if its related, but in version 05 it wouldnt sell, pick gems or stash even tho i set it up right

1. stash is not implemented so far
2. you can easily take a screen shot and make the picture yourself

[andygongyb]

Disregard my previous problem. I am currently trying out beta 0.6 and I cannot get it to work at all. I managed to follow all instructions, I run the exe and it connects itself into the game but the toon remains standing and exits itself out. Something about "The game did not load bla bla...Are you using the english language?..." the game clearly ran but the character just stands there. Really weird. I have tried putting the DLLs in the same folder as the exe and stuff. Would be helpful if someone could give me a hand. Thanks!

edit: NVM, I had fraps on which blocked the imgsearch. I got another feedback for 0.6. We all know that pets and summons often messes up with sarkoth which makes him agitated and move around the room. Its really annoying since I will often die or I will simply teleport without killing sarkoth. Also I have notiched wall of zombies isnt being used during the combat. Works great though

Wall of zombies is in the suggested build for v0.6 beta

[baldbrah]

with new patch, he runs around and attacks you anyway. just make sure you have enough DPS to kill him quickly.

[andygongyb]

primestar i have the same problem like you had but i dont use fraps i dont know what could block the imgsearch... i am just running diablo and the script nothing else...

Need more info on how you set up the script

[andygongyb]

I keep dyin alot lately and it wont revive/repair (using v0.5 as v.06 did not work yesterday night before bedtime...)
Only thing i've done is lower my dps from 12k to 10k unbuffed, might be around that threshold but bot feels so extremely unstable in so many aspects (running, walking up to living mobs etc etc)
Would be intersting to see statistics on failed/succesful run and then failed/succesful on open cellar runs.
With 50% spawnrate the kill rate should be close to 50%, i'd be amazed if its over 20%

Lvling a DH instead

Well, my WD has 12500 unbuffed DPS and 17000 health. It always kills mob smoothly and never died. I didn't tested if the repair function works fine or not, but I never gone to repair it myself ever since I start to develop the script.

[primerastar]

@andygongyb Hey dude apparently they made changes on Sarkoth in patch 1.0.3. Rather the mob standing still and eating damage it will now attack or something. Surely with a decent dps and CC the mob will die before it hits you. I hope your updates will accommodate this change. It sucks that they had to nerf this one too especially when the script is working flawlessly for 12 hours straight. Much appreciated for your work andygongyb and co.

[apeplus]

mine doesnt press the start button, what should i do?

[andygongyb]

Hey, my bot works great exept he doesn't sell. using the stable 0.5.
I've followed the instructions, using the right resolution, i've put the ddls,and the pics in the right place, running both d3 and autoit as admin and so on. Here's my Pngloc[0]


;1920x1080
$pngLoc[0] = "C:\Program Files (x86)\Diablo III\Pics\1920x1080" ; Location of the .PNGs (NO SUBFOLDERS - ALL PNGS GO HERE)
$Resume[0][0] = 319
$Resume[0][1] = 416
$GameLobbyCode[0][0] = 319
$GameLobbyCode[0][1] = 416
$GameLobbyCode[0][2] = 4065536
$GameScreenCode[0][0] = 1119
$GameScreenCode[0][1] = 1044
$GameScreenCode[0][2] = 0xDEFDFE
$LostConnectionOkBtn[0][0] = 957
$LostConnectionOkBtn[0][1] = 630
$LostConnectionText0[0][0] = 764
$LostConnectionText0[0][1] = 493
$LostConnectionText0[0][2] = 843
$LostConnectionText0[0][3] = 521
$LostConnectionText1[0][0] = 779
$LostConnectionText1[0][1] = 507
$LostConnectionText1[0][2] = 853
$LostConnectionText1[0][3] = 525
$CharLoc[0][0] = 944
$CharLoc[0][1] = 507
$CastLoc[0][0] = 600
$CastLoc[0][1] = 300
$SellCoords[0][0] = 517
$SellCoords[0][1] = 238
$SlotOffset[0] = 48
$ItemStartCoord0[0][0] = 1460
$ItemStartCoord0[0][1] = 631
$ItemStartCoord0[0][2] = 1462
$ItemStartCoord0[0][3] = 633
$ItemStartCoord1[0][0] = 1460
$ItemStartCoord1[0][1] = 625
$ItemStartCoord1[0][2] = 1468
$ItemStartCoord1[0][3] = 632
$BagFullCoords[0][0] = 1060
$BagFullCoords[0][1] = 125
$BagFullCoords[0][2] = 1120
$BagFullCoords[0][3] = 160
$IdleCursorCoords[0][0] = 400
$IdleCursorCoords[0][1] = 300
$RunDelayMult[0] = 1.5


Please try to help me, what could i have done wrong?

You need tailing back slash in the path

[andygongyb]

i have still this problem...
Attachment 8330

use win7 64x
800x600
and yes iam a which doc..

he does everything right...
but after some games...i got this message

800x600 is currently not supported in v0.5 and later. Please use v0.4 instead