help with Keazin's X40 full repack

[hampe95]

Hi!
i get an error when i try to start up the Keazin's X40 repack's arcemu-world it says
in red text: Config >>Configs/arcemu-world.conf any 1 know what to do?
and when i start arcemu-logon it says: connection failed due to unknown database 'logon'
plz help +rep to the one who fix it

[hampe95]

This is my config files:
this one is arcemu-logonserver.conf

#######################################################################
# Keazain`s Compilings
#######################################################################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
# 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
#
#

<Rates AccountRefresh = "15">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.9 was build 9551.
#

<Client MinBuild = "9551"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "logon"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

and this one is arcemu-realms.conf

#######################################################################
# Keazain`s Compilings
#######################################################################

#******************************************************************************* *
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#******************************************************************************* */

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Test Realm"
Address = "127.0.0.1:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

andthis one is arcemu-world.conf

#######################################################################
# Keazain`s Compilings
#######################################################################

#/********************************************************************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "logon" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
# Host
# This is the address that the server will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# WorldServerPort
# This is the port that the world server listens on.
# It has to be the same as what is specified in the
# realms table in the LogonDatabase.
# Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"
WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
# Console Logging Level
# This directive controls how much output the server will
# display in it's console. Set to 0 for none, or -1 to disable.
# -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#
# World server packet logging feature
# If this directive is turned on, a file called `world.log`
# will be created in the server's directory and all packets
# sent and received by clients will be dumped here in bfg
# format.
# Default: 0
#
# DisableCrashdumpReport
# Disables crashdump reports, else if the build has debugging enabled,
# arcemu-world will call ./arcemu-crashreport every time it starts, so
# if there is a core, a crashdump will automatically be reported
# to the tracker at sf.net
# Needs gdb and curl
# Linux only
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
# PlayerLimit
# This directive controls the amount of sessions that will be
# accepted by the server before it starts to add people to
# the server queue.
# Default: 100
#
# Motd
# This message will be displayed by the server in the chat
# box every time any user logs on. Colors can be used in the
# standard WoW format.
# Default: "No MOTD specified
#
# Send Stats On Join
# This directive controls whether the server will send the online player
# count to a cilent when it enters the world.
#
# Breathing Setup
# If the breathing code is causing problems or you want to run a fun server, you can disable
# water checks by enabling this directive.
# Default: 1
#
# Seperate Channels Control
# This directive controls whether horde and alliance chats will be seperated across channels.
# Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
# across channels.
# Default: 0
#
# Compression Threshold
# This directive controls the limit when update packets will be compressed using deflate.
# For lower-bandwidth servers use a lower value at the cost of cpu time.
# Default: 1000
#
# Queue Update Rate
# This directive controls how many milliseconds (ms) between the updates
# that the queued players receieve telling them their position in the queue.
# Default: 5000 (5 seconds).
#
# Kick AFK Players
# Time in milliseconds (ms) that a player will be kicked after they go afk.
# Default: 0 (disabled)
#
# Connection Timeout
# This directive specifies the amount of seconds that the client will be disconnected
# after if no ping packet is sent. It is advised to leave it at the default.
# Default: 180
#
# Realm Type
# This is the realm type that will be used by the server to handle world pvp.
# Default: 0 (pve)(RPPVE)
# Other values: 1(pvp)(RPPVP)
#
# AdjustPriority
# Set the server to high process priority?
# Default: 0
#
# RequireAllSignatures
# This directive controls whether the full 10 signatures will be required in order
# to turn in a petition. Smaller servers would be better off having it turned off.
# Default: off
#
# ShowGMInWhoList
# This directive controls whether GM's will be shown in player's who lists or not.
# Default: on
#
# MapUnloadTime
# This directive controls whether to unload map cells after an idle period of <x> seconds.
# Use on smaller servers or servers that are memory-limited. The server without cell unloading
# can use over 1.2GB memory with all creatures loaded.
# Default: 0
#
# LimitedNames
# This directive forces all character names to be a-z and A-Z compliant.
# Default: 1
#
# UseAccountData
# This directive determines whether the account_data table is used to save custom client data.
# May cause buggy behaviour.
# Default: 0
#
# AllowPlayerCommands
# This directive, if enabled can allow players to use commands with a '0' command group.
# Default: 0
#
# EnableLFGJoin
# If this is enabled, you can join the LFG channel without using the LFG tool.
# Default: 0
#
# TimeZone
# Set your local timezone relative to GMT here.
# Default: 0
#
# Collision
# Enable collision system (LoS checks).
# Default: 0
# Make sure you have collision.dll in the same folder as arcemu-world!
#
# DisableFearMovement (In Battlegrounds and Arenas only!)
# Disable fear movement in arenas & battlegrounds.
# Recommended if you do not have collision enabled!
# Default: 0 (off) Not blizzlike
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "100"
Motd = "Welcome to an ArcEmu based server! Wrath of the Lich King is now live!"
SendStatsOnJoin = "1"
EnableBreathing = "1"
SeperateChatChannels = "0"
CompressionThreshold = "1000"
QueueUpdateInterval = "5000"
KickAFKPlayers = "0"
ConnectionTimeout = "180"
RealmType = "1"
AdjustPriority = "0"
RequireAllSignatures = "0"
ShowGMInWhoList = "1"
MapUnloadTime="0"
LimitedNames="1"
UseAccountData="0"
AllowPlayerCommands="0"
EnableLFGJoin="0"
TimeZone="0"
Collision="0"
DisableFearMovement="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Announce Configuration
#
# Tag
# Configure what is shown in front of your announces in the [] brackets.
# Default: Staff (would give [Staff])
#
# GMAdminTag
# Configure whether the <GM> or <Admin> tag is shown in announces.
# Default: 0 (disabled)
#
# NameinAnnounce
# If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
# Default: 1 (enabled)
#
# NameinWAnnounce
# If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
# of the message.
# Default: 1 (enabled)
#
# ShowInConsole
# This controls whether announces are shown in the arcemu-world console or not.
# This does not apply for the team-internal GM announce.
# Default: 1 (enabled)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Announce Tag = "Staff"
GMAdminTag = "0"
NameinAnnounce = "1"
NameinWAnnounce = "1"
ShowInConsole = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
#
# These directives set up the multiplier in which regen values will be
# multiplied by every 2 seconds.
# Powers:
# Power1 = Mana, Power2 = Rage, Power3 = Focus (pets), Power4 = Energy
#
# Reputation:
# Kill = Rep gained on kill, Quest = rep gained from quests
#
# Honor:
# Honor = multiplier used to calculate honor per-kill.
#
# PvP:
# PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
# ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
#
# XP:
# The xp that a player receives from killing a creature will be multiplied
# by this value in order to get his xp gain.
#
# RestXP:
# Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
# Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
# F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of .
# Note that resting in a resting area (Zzz) goes 4 times faster.
# Default: 1 (bubble every 8 hrs)
#
# Drop(Color):
# These values will be multiplied by the drop percentages of the items for creatures
# to determine which items to drop. All default to 1.
# To allow you better control of drops, separate multipliers have been created for items
# of each quality group.
#
# DropMoney:
# This value will be multiplied by any gold looted and pickpocketed
#
# Save:
# Value in milliseconds (ms) that will be between player autosaves.
# Default: 300000 (5 minutes)
#
# SkillChance:
# The chance that you have to level up a skill in melee or a profession is multiplied
# by this value.
# Default: 1
#
# SkillRate:
# The amount of "levels" your skill goes up each time you gain a level is multiplied
# by this value.
#
# ArenaMultiplier
# Every week/day the arena points gained by a player will be multiplied by this value.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="10"
Power1="10"
Power2="10"
Power3="10"
Power4="10"
QuestReputation="10"
KillReputation="10"
Honor="10"
PvPTimer="300000"
ArenaQueueDiff="150"
Compression="1"
XP="10"
QuestXP="10"
RestXP="10"
ExploreXP="10"
DropGrey="1"
DropWhite="1"
DropGreen="1"
DropBlue="1"
DropPurple="50"
DropOrange="60"
DropArtifact="30"
DropMoney="100"
Save="300000"
SkillChance="10"
SkillRate="10"
ArenaMultiplier2x="10"
ArenaMultiplier3x="10"
ArenaMultiplier5x="10">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
# This should be set to 'gm_sync_channel' for the My_Master addon to work.
# Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain & Collision Settings
#
# Set the path to the map_xx.bin files and whether unloading should be enabled
# for the main world maps here. Unloading the main world maps when they go idle
# can save a great amount of memory if the cells aren't being activated/idled
# often. Instance/Non-main maps will not be unloaded ever.
#
# Default:
# MapPath = "maps"
# vMapPath = "vmaps"
# UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps"
vMapPath = "vmaps"
UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
#
# Cheaters:
# This directive sets up the cheater logging file, if turned on any
# cheat / packet exploit / speedhack attempts will be logged here.
#
# GMCommands:
# These two directives set up the GM command logging fie. If turned on,
# most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
# These directives control the limits and behaviour of the ingame mail system.
# All options must have Mail prefixed before them.
#
# ReloadDelay
# Controls the delay at which the database is "refreshed". Use it if you're
# inserting mail from an external source, such as a web-based interface.
# 0 turns it off.
# Default: 0
#
# DisablePostageCostsForGM
# Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
# Default: 1
#
# DisablePostageCosts
# Disables postage costs for all players.
# Default: 0
#
# DisablePostageDelayItems
# Disables the one hour wait time when sending mail with items attached.
# Default: 1
#
# DisableMessageExpiry
# Turns off the 30 day / 3 day after read message expiry time.
# WARNING: A mailbox still cannot show more than 50 items at once
# (stupid limitation in client).
# Default: 0
#
# EnableInterfactionMail
# Removes the faction limitation for sending mail messages. Applies to all players.
# Default: 1
#
# EnableInterfactionMailForGM
# Removes the faction limitation for sending mail messages, but only applies
# to GM's. EnableInterfactionMail overrides this.
# Default: 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
DisablePostageCostsForGM="1"
DisablePostageCosts="0"
DisablePostageDelayItems="1"
DisableMessageExpiry="0"
EnableInterfactionMail="1"
EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
# These directives set up the status dumper plugin. Filename is an
# absolute or relative path to the server binary. Interval is the
# time that the stats will be dumped to xml.
# Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
# Preloading
# This directive controls whether the entire world will be spawned at server
# startup or on demand. It is advised to leave it disabled unless you are a
# developer doing testing.
# Default: off
#
# Background Loot Loading
# This directive controls whether loot will be loaded progressively during
# startup or in the background in a seperate thread. Turning it on will
# result in much faster startup times.
# Default: on
#
# Multithreaded Startup
# This controls whether the server will spawn multiple worker threads to
# use for loading the database and starting the server. Turning it on
# increases the speed at which it starts up for each additional cpu in your
# computer.
# Default: on
#
# Additional Table Binding
# You can load static item/creature/etc data into the server using this directive.
# This way throughout database updates your custom data can be preserved.
# Format: "sourcetable destination table,sourcetable destinationtable"
# Example: "myitems items,mynpcs creature_names"
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"
BackgroundLootLoading = "1"
EnableMultithreadedLoading = "1"
LoadAdditionalTables="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
# Lines
# This is the number of "messages" or lines that it will allow before stopping messages from
# being sent. This counter is reset every "Seconds" seconds.
# Default: 0 (disabled)
#
# Seconds
# This is the number of seconds inbetween the Line counter being reset.
# Default: 0 (disabled)
#
# SendMessage
# If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
# message will be sent upon flood triggering.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
# DisablePings
# This directive controls whether pings will be sent to the logonserver to check
# if the connection is still "alive". Expect problems if it is disabled.
# Default: 0
#
# RemotePassword
# This directive controls the password used to authenticate with the logonserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
RemotePassword = "logon">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup
#
# Teleport
# This directive controls anti-teleport hack checks will be enabled or not.
# Default: 1
#
# Speed
# This directive controls anti-speed hack checks will be performed on player movement or not.
# Default: 1
#
# SpeedThreshold
# This directive controls the threshold at which the speedhack detection will trip.
# It's (characters' move time of distance - real move time of distance)
# Default: -600.0
#
# FallDamage
# This directive controls anti-fall damage hack checks will be performed on player movement or not.
# Default: 1
#
# Flying
# This directive controls whether flight hacks will be performed on players or not.
# Default: 1
#
# FlightThreshold
# This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
# Default: 10
#
# DisableOnGM
# This directive controls hack checks will be disabled for GM's or not.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="0"
Speed="0"
FallDamage="0"
Flight="0"
FlightThreshold="0"
DisableOnGM="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Period Setup
#
# These are the periods that the server will wait before doing periodic duties. At the moment only
# arena point calculation and honor point calculation are used here.
#
# Default:
# Arena: weekly
# Honor: daily
# (blizzlike values)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"
ArenaUpdate="weekly"
DailyUpdate="daily">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channels Setup
#
# These directives control some of the aspects in the channel system.
#
# BannedChannels
# If you would like to ban users from creating or joining a channel specify them here in a ';'
# seperated list.
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# VoiceChat Setup
#
# These directives control some of the aspects in the voice chat system.
#
# Enabled
# If you want to enable the voice chat system, this must be set to 1.
# Default: "0"
#
# ServerIP
# This is the IP of the voice chat server.
# Default: "127.0.0.1"
#
# ServerPort
# This is the TCP port of the voice chat server.
# Default: "3727"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"
ServerIP="127.0.0.1"
ServerPort="3727">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remote Console Setup
#
# These directives control the remote administration console.
#
# Enabled
# If you want to enable the remote administration console, set this.
# Default: 0
#
# Host
# This is the interface the RA server listens on.
# Default: "0.0.0.0"
#
# Port
# This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
# Default: 8092
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<RemoteConsole Enabled="0"
Host="0.0.0.0"
Port="8092">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Scripting Engine Setup
#
# ArcEmu can support multiple script backends via the means of loading .dll files for them.
# This section in the config can enable/disable those backends.
#
# LUA
# If you would like to enable the LUA scripting backend, enable this.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ScriptBackends LUA="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Movement Setup
#
# NOTE: For any of these directives to function, movement compression has to be compiled into
# the server.
#
# FlushInterval
# This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
# If you have a high threshold, keeping this at 1-2 seconds will work better.
# Default: 1000 (one second)
#
# CompressionRate
# This is the deflate compression rate. Higher will use more cpu, but smaller packets.
# Range: 1-9 (or 0 is disable)
# Default: 1
#
# CompressionThreshold
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. It is advised to keep it at least 30 units. This value is used for players.
# Default: 30.0
#
# CompressionThresholdCreatures
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. This value is used for creatures, so it can be a lot lower.
# Default: 10.0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Movement FlushInterval="1000"
CompressRate="1"
CompressThreshold="30.0"
CompressThresholdCreatures="10.0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Localization Setup
#
# LocaleBindings
# This is a list of locale names and the other locale you want to associate with them.
# For example, to make the European client always use the french language, "enGB=frFR"
#
# Must be terminated by a space.
#
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Localization LocaleBindings="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Dungeon / Instance Setup
#
# TakeGroupLeaderID
# If a player doesn't have an instance id, the group isn't already assigned
# to an instance and the group or raid leader already have one, the player will
# be bound to the instance id of the group/raid leader.
# Default: 1 (enabled)
#
# SlidingExpiration
# If enabled, persistent instances will expire relative to the creation time.
# Otherwise persistent instances will expire at fixed points of time. (blizz like)
# Default: 0 (disabled)
#
# DailyHeroicInstanceResetHour
# Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
# Default: 5
#
# CheckTriggerPrerequsites
# Entering & checks
# Default: 1
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<InstanceHandling TakeGroupLeaderID="1"
SlidingExpiration="0"
DailyHeroicInstanceResetHour="5"
CheckTriggerPrerequsites="1" >


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# BattleGround settings
# Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
#
# AlteracValley
# AV_MIN
# AV_MAX
#
# ArathiBasin
# AB_MIN
# AB_MAX
#
# WarSong
# WS_MIN
# WS_MAX
#
# Eyes Of The Storm.
# EOS_MIN
# EOS_MAX
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Battleground AV_MIN="0"
AV_MAX="40"
AB_MIN="4"
AB_MAX="15"
EOS_MIN="4"
EOS_MAX="15"
WS_MIN="2"
WS_MAX="10" >

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartOnGMIsland
#
# Makes GM Characters start on GM Island
#
# Also sets their bind location to GM Island
# Default:1 (Yes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<GameMaster StartOnGMIsland = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Arena Settings
#
# Allows you to control current season and its progress.
#
# Season - has to be higher than 0 for arenas to work.
# Progress - sets the progress, 0 = finished, 1 = in progress
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Arena Season = "5"
Progress = "1">

any one know if anythin is wrong in there?

[GQG]

It write with my to.

[garfieldreturns]

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
RemotePassword = "logon">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup


remote password should be "ascent" not logon.

Check all other cfg files to make sure you have password set to same thing "ascent".


and here


<LogonServer RemotePassword = "logon"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">




guild house wont work if not set to this password "see keazain's notice on his thread 1st page about this.


cheers

[hampe95]

i gonna try it:P

[hampe95]

nope still same error

[hampe95]

it still says unknow database

[alumeto]

Hi!
i get an error when i try to start up the Keazin's X40 repack's arcemu-world it says
in red text: Config >>Configs/arcemu-world.conf any 1 know what to do?
and when i start arcemu-logon it says: connection failed due to unknown database 'logon'
plz help +rep to the one who fix it

1. Add 1 eöpty line to end of arcemuworld.config
2. Delete some ##### from arcemuoptional config

[hampe95]

alumeto thx for help but it didnt work
do you know anything else that might be wrong?

[hampe95]

or could u send me your config files or somthin?
and (if its public) just remove ur IP and replace it with 127.0.0.1 before you send it?

[alumeto]

RapidShare: Easy Filehosting

[hampe95]

sorry but that didnt help
but i got help from a guy and its fixed but now i got another erorr...
but its for apache

[hampe95]

i got a new error when i start up apache and yea if u help (and it works^^) ill give you +rep

this is what happens when i start it up it comes a error that says :
Arcemu Core compiled by Keazin
apache.exe: Syntax error on line 3 of C:/ArcEmu_repack.2254/Keazins Pack/Server/apache/conf/httpd.conf: ServerRoot must be a valid directory Make shure you have NOT renamed or redirected your repack settings
apache could not be started.

here is my httpd.conf:

ThreadsPerChild 250
MaxRequestsPerChild 0
ServerRoot "/Keazains Pack/Server/"
Listen 80
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule status_module modules/mod_status.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
ServerAdmin admin@localhost
ServerName localhost:80
DocumentRoot "/Keazains Pack/Server/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/Keazains Pack/Server/htdocs">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all

</Directory>
<IfModule dir_module>
DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
ErrorLog logs/error.log
LogLevel warn

<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog logs/access.log common
</IfModule>

<IfModule alias_module>
ScriptAlias /cgi-bin/ "/Keazains Pack/Server/cgi-bin/"

</IfModule>
<Directory "/Keazains Pack/Server/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain

<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddHandler cgi-script .cgi
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>
EnableMMAP off
EnableSendfile off
<IfModule alias_module>
<IfModule mime_module>
LoadModule php5_module "/Keazains Pack/Server/apache/bin/php5apache2.dll"
AddType application/x-httpd-php-source .phps
AddType application/x-httpd-php .php .php5 .php4 .php3 .phtml

<Directory "/Keazains Pack/Server/htdocs/xampplite">
<IfModule php5_module>
<Files "status.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
</Directory>

Alias /security "/Keazains Pack/Server/security/htdocs/"
<Directory "/Keazains Repack 1.0/Server/security/htdocs">
<IfModule php5_module>
<Files "xampplitesecurity.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>

Alias /phpmyadmin "/Keazains Pack/Server/phpMyAdmin/"
<Directory "/Keazains Pack/Server/phpMyAdmin">
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>

Alias /webalizer "/Keazains Pack/Server/webalizer/"
<Directory "/Keazains Repack 1.0/Server/webalizer">
<IfModule php5_module>
<Files "webalizer.php">
php_admin_flag safe_mode off
</Files>
</IfModule>
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>
</IfModule>
</IfModule>
<IfModule auth_remote_module>
<Directory "/Keazains Pack/Server/htdocs/fonts">
AllowOverride All
AuthType Basic
AuthName "AUTH REMOTE TEST"
AuthRemoteServer localhost
AuthRemotePort 80
AuthRemoteURL /forbidden/
Require valid-user
</Directory>
</IfModule>
<IfModule mysql_auth_module>
<Location /restricted>
AuthMySQLEnable On
AuthName "MySQL Secured Place"
AuthType Basic
require valid-user
AuthMySQLHost localhost
AuthMySQLUser root
AuthMySQLDB webauth
AuthMySQLUserTable user_pwd
AuthMySQLNameField name
AuthMySQLPasswordField pass
AuthMySQLPwEncryption none
</Location>
</IfModule>


Alias /error/ "/Keazains Pack/Server/apache/error/"

<Directory "/Keazains Pack/Server/apache/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>

ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var


IndexOptions FancyIndexing VersionSort
Alias /icons/ "/Keazains Pack/Server/apache/icons/"

<Directory "/Keazains Pack/Server/apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t


AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
ForceLanguagePriority Prefer Fallback
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis

<IfModule userdir_module>
UserDir "My Documents/My Website"
<Directory C:/Documents and Settings/*/"My Documents/My Website">
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
</IfModule>



<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from .example.com
</Location>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from .example.com
</Location>






<IfModule dav_module>
<IfModule dav_fs_module>
<IfModule setenvif_module>
<IfModule authn_file_module>

DavLockDB "/Keazains Pack/Server/tmp/DavLock"
Alias /webdav "/Keazains Pack/Server/webdav"

<Directory "/Keazains Pack/Server/webdav">
Dav On
Order allow,deny
Allow from all
AuthName DAV-upload
AuthType Basic
AuthUserFile "/Keazains Pack/Server/security/htpasswd.webdav"

<LimitExcept GET HEAD OPTIONS>
require valid-user
</LimitExcept>
</Directory>
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
</IfModule>
</IfModule>
</IfModule>
</IfModule>


Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 5
UseCanonicalName Off
AccessFileName .htaccess
ServerTokens Full
ServerSignature On
HostnameLookups Off

Listen 443
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
SSLPassPhraseDialog builtin
SSLSessionCache dbm:logs/ssl.scache
SSLSessionCacheTimeout 300
SSLMutex default

<VirtualHost _default_:443>
DocumentRoot "/Keazains Pack/Server/htdocs"

ServerName localhost:443
ServerAdmin admin@localhost

ErrorLog logs/error.log
<IfModule log_config_module>
CustomLog logs/access.log combined
</IfModule>
SSLEngine on
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile conf/ssl.crt/server.crt
SSLCertificateKeyFile conf/ssl.key/server.key
<Location />
</Location>
<FilesMatch "\.(cgi|shtml|phtml|php|php5|php4|php3)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/Keazains Pack/Server/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
<IfModule setenvif_module>
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
</IfModule>
<IfModule log_config_module>
CustomLog logs/ssl_request.log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</IfModule>
</VirtualHost>

<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

any1 know whats wrong plz help me and i should give u a +rep cookie:P

[alumeto]

@hampe95
move all to C:/Keazins Pack/
not in arcemublabla

[hoffa96]

if u don't move it to C:/Keazins Pack/ it wont work, tried my self, but i suck at explanations =) and keep in mind! don't have to much addons and shit in both WoW and Ur server. if Ur unlucky your whole computer will get ****ed! I'm just saying it ;P it can be useful info =)