Stuck At "Success"

[avalanche]

ok so im having this really weird problem. this morning my dsl went down and so my server had to be taken down as well, because im on the computer with the server I kept playing and shut things down a few hours later. well 8pm rolls around and the dsl comes back up. so when I get the server back up and try to connect im getting stuck at success on my public server. this is happening on both the server and outside computers trying to connect.

my console is acting weird too, world.exe is finished a lot faster than it should and im getting this error out of loginserver.exe

Hooking signals...
Success! Ready for connections
Authentication request from ***.***.*.***, result OK.
Key: 8B3598E6126C72C880D2F44DA10CFE0773804591
Registering realm `Echo` under ID 1.
Registering realm `Echo - Local` under ID 2.
Got mapping packet for realm 1, total of 2 entries.
Got mapping packet for realm 2, total of 2 entries.
20:19 D ThreadPool: IntegrityCheck: (gobbled < 0) Spawning 8 threads.
20:19 D ThreadPool: Thread 888 entered the free pool.
20:19 D ThreadPool: Thread 684 entered the free pool.
20:19 D ThreadPool: Thread 3756 entered the free pool.
20:19 D ThreadPool: Thread 3148 entered the free pool.
20:19 D ThreadPool: Thread 2164 entered the free pool.
20:19 D ThreadPool: Thread 3552 entered the free pool.
20:19 D ThreadPool: Thread 2228 entered the free pool.
20:19 D ThreadPool: Thread 1820 entered the free pool.
20:21 D ThreadPool: Killing 3 excess threads.
20:21 D ThreadPool: IntegrityCheck: (gobbled > 5) Killing 3 threads.
20:21 D ThreadPool: Thread 888 exiting.
20:21 D ThreadPool: Thread 3148 exiting.
20:21 D ThreadPool: Thread 684 exiting.

and this is what my world.exe says when it starts:

20:17 N Server: Loading optional scripting engines...
20:17 N Server: Done loading script engines...
20:17 N Server: Ready for connections. Startup time: 10016ms
20:17 N RemoteConsole: Starting...
20:17 N LogonCommClient: Loading forced permission strings...
20:17 N LogonCommClient: Attempting to connect to logon server...
20:17 N LogonCommClient: Connecting to logonserver on `echo.striker.org:8093`...
20:17 N LogonCommClient: Authenticating...
20:17 N LogonCommClient: Authentication succeeded.
20:17 N LogonCommClient: Registering Realms...
20:17 N LogonCommClient: Realm `Echo` registered as realm 1.
20:17 N LogonCommClient: Build character mapping in 0ms. (2)
20:17 N LogonCommClient: Realm `Echo - Local` registered as realm 2.
20:17 N LogonCommClient: Build character mapping in 0ms. (2)
20:17 N LogonCommClient: Logonserver latency is 0ms.

any ideas?

[kreegoth]

gobbled / success Not sure what your problem is.. Ie i mean Not sure what it is your asking.. Maybe be a little less vague? having Threads be gobbled and such is normal im pretty sure..

And it starts faster ok? well as long as nothing is missing when it does... whats the problem?

[avalanche]

i mean that it wont allow me or anyone else to connect to the public server. it gets stuck at "Success!" and just wont go past that. and the reason i posted to gobled thing is because that was the first time I had seen it. I just am not sure how to get back on the public realm .. oh and I used to play eq as well I was jalagi and stifon from sullon zek

[kreegoth]

Hmm can you post a screen of what goes on in the two windows while someone is stuck at the success screen? and maybe post your configs..

obviously i played EQ as well:P I was Kreegoth on Seventh hammer/lanys Tval..

Been thinking about starting to Emulate EQ too.. but its such a basic game compared to this anymore..

[avalanche]

the console stuff happens when I start up the server. and I get stuck at the


is where everyone gets stuck (myself included)) even if I choose another server and try to click into the server I get stuck at "Logging in to game server" eventually it puts me back at the server selection.

im gonna keep working on it

[avalanche]

ok im having a worse problem now I got the server up and tryed to log on to the local server and my character was naked, all the armor, equipment, and bags were gone. when I tried to have my friend log in from my laptop, it wouldnt let him past character selection screen and his attempt dropd off the world console. this is getting weirder and weirder

[avalanche]

ok im losing my mind I guess... I just restarted the server... all of my armor and stuff is back. still cant log into the public server though

[kreegoth]

Post configs.

[avalanche]

# ArcEmu Realms Configuration File  
# Last updated at revision 425 by neo_mat
#######################################################################
/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/
# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
<LogonDatabase Hostname = "echo.hopto.org"
               Username = "root"
               Password = "*******"
               Name     = "world"
               Port     = "3306"
               Type     = "1">
 
# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#
<Listen Host = "0.0.0.0"
        ISHost = "192.168.1.***"
        RealmListPort = "3724"
        ServerPort = "8093">
# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#
<LogLevel Screen = "0"
          File = "-1">
# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 600
#
<Rates AccountRefresh = "60">
# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#
<Client MinBuild = "8606"
        MaxBuild = "9999">
# WorldServer Setup
#
#  RemotePassword
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#
#  AllowedIPs
#    This section MUST be completed, otherwise all attempts to link your servers will fail.
#    These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
#    to make server connections to your logonserver, and register realms.
#    For example, everything in the 127.0.0.* range would be:
#         127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
#    To allow a single IP,
#         1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
#  AllowedModIPs
#    In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
#    (adding bans, GMs, account permissions, etc)
#
<LogonServer RemotePassword = "ascent"
             AllowedIPs = "192.168.1.***/32"
             AllowedModIPs = "192.168.1.***/32">

========================================================

 #######################################################################
# ArcEmu Configuration File
# Last Update: : arcemu-world.conf 336 by Dameon $
#######################################################################
/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
#   Database.Host      - The hostname that the database is located on
#   Database.Username  - The username used for the mysql connection
#   Database.Password  - The password used for the mysql connection
#   Database.Name      - The database name
#   Database.Port      - Port that MySQL listens on. Usually 3306.
#   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<WorldDatabase Hostname = "localhost" Username = "root" Password = "avalanche" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "avalanche" Name = "world" Port = "3306" Type = "1">
 
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
#    Host
#        This is the address that the server will listen on.
#        To listen on all addresses, set it to 0.0.0.0
#        Default: 127.0.0.1 (localhost)
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">
 
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
#
#    DisableCrashdumpReport
#        Disables crashdump reports, else if the build has debugging enabled, 
#        arcemu-world will call ./arcemu-crashreport every time it starts, so 
#        if there is a core, a crashdump will automatically be reported 
#        to the tracker at sf.net
#        Needs gdb and curl
#        Linux only
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">
theres more but for spam reasons il just say anything past this is unchanged

[kreegoth]

<Listen Host = "0.0.0.0"
ISHost = "192.168.1.***"
RealmListPort = "3724"
ServerPort = "8093">

Try changing that back to 0.0.0.0 for IShost..

<LogonServer RemotePassword = "ascent"
AllowedIPs = "192.168.1.***/32"
AllowedModIPs = "192.168.1.***/32">

Try making it /24 istead of /32


Your Logon database and World Database are under the same heading?

Most times logon database is seperate and has a different name.....

You should post your Realms config too..

[avalanche]

ok I changed those and im still getting the problem. heres my realm file:

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision 336 by Dameon
#######################################################################
/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<LogonServer Address = "echo.hopto.org"
             Port = "8093"
             Name = "root"
             RealmCount = "2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Realm1 Name = "Echoes of Asgard"
        Address = "76.198.242.***:8129" 
        Icon = "PVP"
        Population = "1.0"
        TimeZone = "1">
<Realm2 Name = "Echoes of Asgard - Local"
        Address = "192.168.1.***:8129" 
        Icon = "PVP"
        Population = "1.0"
        TimeZone = "1">

[kreegoth]

<LogonServer Address = "echo.hopto.org"
Port = "8093"
Name = "root"
RealmCount = "2">

Try changing that to your local host address. If that doesnt work Check out Open port tool or Canyouseeme.Org to see if your ports are opened right.. and Check your hosts file to see if its setup right..

Should be

ExternalIP Echo.hopto.org
InternalIP Echo.hopto.org

[avalanche]

I changed it to my local host and it still didnt work. Im going to go check and see if the ports are open. I had a problem similar to this before but it was caused by my ports being closed and I had to enable dmz mode (for some reason it wont save forwarded ports so I have to use dmz mode or nothing :/ ). thats still enabled now though. the weird thing is that I didnt have any problems before and then my dsl went down for like 5 hours. apparently they had some issue over at at&t. when it came back up though, all of these problems started. I figured this could be a problem with the router but its ports are all open.