Set Up A Non Hamachi Server With An Account Creation Page

[Xtinction]

Hey Guys So First Off In Order To Do This You Will Need A Good Repack. Just Use Any Repack It Does Not Matter Which One But I Do Recommend You Do Not Use Ac Web Ultimate Repack 7.7 .

Step 1: First You Will Need To Extract The Repack Into Your C:/ Folder Then Go Into The Ascent Folder.

Step 2: Once In The Ascent Folder Open Up ascent-world.conf . Please Change The Following In Red.

#######################################################################
# Ascent Configuration File
# Last Update: $Id: ascent-world.conf 4355 2008-03-03 16:22:26Z emsy $
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
#   Database.Host      - The hostname that the database is located on
#   Database.Username  - The username used for the mysql connection
#   Database.Password  - The password used for the mysql connection
#   Database.Name      - The database name
#   Database.Port      - Port that MySQL listens on. Usually 3306.
#   Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "127.0.0.1" Username = "username" Password = "pass" Name = "DB" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "127.0.0.1" Username = "username" Password = "pass" Name = "DB" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
#    Host
#        This is the address that the server will listen on.
#        To listen on all addresses, set it to 0.0.0.0
#        Default: 127.0.0.1 (localhost)
#
#    WorldServerPort
#        This is the port that the world server listens on.
#        It has to be the same as what is specified in the
#        realms table in the LogonDatabase.
#        Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"
        WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
#    Console Logging Level
#        This directive controls how much output the server will
#        display in it's console. Set to 0 for none, or -1 to disable.
#        -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#        Default: 3
#
#    World server packet logging feature
#        If this directive is turned on, a file called `world.log`
#        will be created in the server's directory and all packets
#        sent and received by clients will be dumped here in bfg
#        format.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogLevel Screen="0" File="-1" World="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
#    PlayerLimit
#        This directive controls the amount of sessions that will be
#        accepted by the server before it starts to add people to 
#        the server queue.
#        Default: 100
#
#    Motd
#        This message will be displayed by the server in the chat
#        box every time any user logs on. Colors can be used in the
#        standard WoW format.
#        Default: "No MOTD specified
#
#    Send Build On Join
#        This directive controls whether the server's internal revision
#        will be sent to clients upon entering the world. Use it to help
#        testers report bugs.
#
#    Send Stats On Join
#        This directive controls whether the server will send the online player
#        count to a cilent when it enters the world.
#
#    Breathing Setup
#        If the breathing code is causing problems or you want to run a fun server, you can disable 
#        water checks by enabling this directive.
#        Default: 1
#
#    Level Cap
#        This variable controls the level that stats will be generated up to internally.
#        Beyond this level players can still see a higher level visually but their stats won't
#        increase beyond this point.
#        Default: 70
#
#	Generated Level Level Cap
#	   This variable controls the level at which stats will generate up to. Generally the formulas go
#	   crazy after level 70 so this way you can keep the high visual but stats at a reasonable value.
#	   Default: 70
#
#    Seperate Channels Control
#        This directive controls whether horde and alliance chats will be seperated across channels.
#        Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
#        across channels.
#        Default: 0
#
#    Compression Threshold
#        This directive controls the limit when update packets will be compressed using deflate.
#        For lower-bandwidth servers use a lower value at the cost of cpu time.
#        Default: 1000
#
#    Queue Update Rate
#        This directive controls how many milliseconds (ms) between the updates
#        that the queued players receieve telling them their position in the queue.
#        Default: 5000 (5 seconds).
#
#    Kick AFK Players
#        Time in milliseconds (ms) that a player will be kicked after they go afk.
#        Default: 0 (disabled)
#
#    Connection Timeout
#        This directive specifies the amount of seconds that the client will be disconnected
#        after if no ping packet is sent. It is advised to leave it at the default.
#        Default: 180
#
#    Realm Type
#        This is the realm type that will be used by the server to handle world pvp.
#        Default: 0 (pve)(RPPVE)
#        Other values: 1(pvp)(RPPVP)
#
#    AdjustPriority
#        Set the server to high process priority?
#        Default: 0
#
#    RequireAllSignatures
#        This directive controls whether the full 10 signatures will be required in order
#        to turn in a petition. Smaller servers would be better off having it turned off.
#        Default: off
#
#    ShowGMInWhoList
#        This directive controls whether GM's will be shown in player's who lists or not.
#        Default: on
#
#    MapUnloadTime
#        This directive controls whether to unload map cells after an idle period of <x> seconds.
#        Use on smaller servers or servers that are memory-limited. The server without cell unloading
#        can use over 1.2GB memory with all creatures loaded.
#        Default: 0
#
#    LimitedNames
#        This directive forces all character names to be a-z and A-Z compliant.
#        Default: 1
#
#    UseAccountData
#        This directive determines whether the account_data table is used to save custom client data.
#        May cause buggy behaviour.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "1000"
        Motd = "Your MOTD"        
        SendBuildOnJoin = "1"
        SendStatsOnJoin = "1"
        EnableBreathing = "1"
        LevelCap = "Level Cap You Want"
        GenLevelCap = "Level Cap You Want"
        SeperateChatChannels = "0"
        CompressionThreshold = "1000"
        QueueUpdateInterval = "5000"
        KickAFKPlayers = "0"
        ConnectionTimeout = "180"
        RealmType = "1"
        AdjustPriority = "0"
        RequireAllSignatures = "0"
        ShowGMInWhoList = "1"
        MapUnloadTime="0"
        LimitedNames="1"
        UseAccountData="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
# 
#    These directives set up the multiplier in which regen values will be
#    multiplied by every 2 seconds.
#    Powers: 
#        Power1 = Mana, Power2 = Rage, Power3 = Energy
#    
#    Reputation:
#        Kill = Rep gained on kill, Quest = rep gained from quests
#
#    Honor:
#        Honor = multiplier used to calculate honor per-kill.
#
#    PvP:
#        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
#
#    XP:
#        The xp that a player receives from killing a creature will be multiplied
#        by this value in order to get his xp gain.
#
#    RestXP: 
#        Value is the amount of rest XP a player will recieve per minute of rest time.
#
#    Drop(Color):
#        These values will be multiplied by the drop percentages of the items for creatures
#        to determine which items to drop. All default to 1.
#        To allow you better control of drops, separate multipliers have been created for items 
#        of each quality group. 
#
#    DropMoney:
#        This value will be multiplied by any gold looted and pickpocketed
#
#    Save:
#        Value in milliseconds (ms) that will be between player autosaves.
#        Default: 300000 (5 minutes)
# 
#    SkillChance:
#        The chance that you have to level up a skill in melee or a profession is multiplied
#        by this value.
#        Default: 1
#
#    SkillRate:
#        The amount of "levels" your skill goes up each time you gain a level is multiplied
#        by this value.
#
#    ArenaMultiplier
#         Every week/day the arena points gained by a player will be multiplied by this value.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="5"
       Power1="5"
       Power2="5"
       Power3="5"
       QuestReputation="7"
       KillReputation="7"
       Honor="5"
       PvPTimer="300000"
       Compression="1"
       XP="40"
       QuestXP="45"
       RestXP="40"
       DropGrey="10"
       DropWhite="10"
       DropGreen="10"
       DropBlue="10"
       DropPurple="10"
       DropOrange="10"
       DropArtifact="10"
       DropMoney="75"
       Save="300"
       SkillChance="7"
       SkillRate="7"
       ArenaMultiplier2x="1"
       ArenaMultiplier3x="1"
       ArenaMultiplier5x="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
#   This should be set to 'gm_sync_channel' for the My_Master addon to work.
#   Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain Configuration
#
#   Set the path to the map_xx.bin files and whether unloading should be enabled
#   for the main world maps here. Unloading the main world maps when they go idle
#   can save a great amount of memory if the cells aren't being activated/idled
#   often. Instance/Non-main maps will not be unloaded ever.
#
#   Default:
#      MapPath = "maps"
#      UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps" UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
# 
#    Cheaters:
#        This directive sets up the cheater logging file, if turned on any
#        cheat / packet exploit / speedhack attempts will be logged here.
#
#    GMCommands:
#        These two directives set up the GM command logging fie. If turned on,
#        most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
#    These directives control the limits and behaviour of the ingame mail system.
#    All options must have Mail prefixed before them.
#   
#    ReloadDelay                 
#        Controls the delay at which the database is "refreshed". Use it if you're
#        inserting mail from an external source, such as a web-based interface.
#        0 turns it off.
#        Default: 0
#
#    DisablePostageCostsForGM 
#        Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
#        Default: 1
#
#    DisablePostageCosts
#        Disables postage costs for all players.
#        Default: 0
#
#    DisablePostageDelayItems
#        Disables the one hour wait time when sending mail with items attached.
#        Default: 1
#
#    DisableMessageExpiry
#        Turns off the 30 day / 3 day after read message expiry time. 
#        WARNING: A mailbox still cannot show more than 50 items at once
#        (stupid limitation in client).
#        Default: 0
#
#    EnableInterfactionMail
#        Removes the faction limitation for sending mail messages. Applies to all players.
#        Default: 1
#
#    EnableInterfactionMailForGM 
#        Removes the faction limitation for sending mail messages, but only applies
#        to GM's. EnableInterfactionMail overrides this.
#        Default: 1
#   
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
      DisablePostageCostsForGM="1"
      DisablePostageCosts="0"
      DisablePostageDelayItems="1"
      DisableMessageExpiry="0"
      EnableInterfactionMail="1"
      EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
#        These directives set up the status dumper plugin. Filename is an
#        absolute or relative path to the server binary. Interval is the
#        time that the stats will be dumped to xml.
#        Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "C:/Shamankings Repack/Server/xampp/htdocs/stats/stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
#    Preloading
#        This directive controls whether the entire world will be spawned at server
#        startup or on demand. It is advised to leave it disabled unless you are a
#        developer doing testing.
#        Default: off
#
#    Background Loot Loading
#        This directive controls whether loot will be loaded progressively during
#        startup or in the background in a seperate thread. Turning it on will
#        result in much faster startup times.
#        Default: on
#
#    Multithreaded Startup
#        This controls whether the server will spawn multiple worker threads to
#        use for loading the database and starting the server. Turning it on
#        increases the speed at which it starts up for each additional cpu in your
#        computer.
#        Default: on
#
#    Additional Table Binding
#        You can load static item/creature/etc data into the server using this directive.
#        This way throughout database updates your custom data can be preserved.
#        Format: "sourcetable destination table,sourcetable destinationtable"
#        Example: "myitems items,mynpcs creature_names"
#        Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"
         BackgroundLootLoading = "1"
         EnableMultithreadedLoading = "1"
         LoadAdditionalTables="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
#    Lines
#        This is the number of "messages" or lines that it will allow before stopping messages from
#        being sent. This counter is reset every "Seconds" seconds.
#        Default: 0 (disabled)
#
#    Seconds
#        This is the number of seconds inbetween the Line counter being reset.
#        Default: 0 (disabled)
#
#    SendMessage
#        If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
#        message will be sent upon flood triggering.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
#    DisablePings   
#        This directive controls whether pings will be sent to the logonserver to check
#        if the connection is still "alive". Expect problems if it is disabled.
#        Default: 0
#
#    RemotePassword
#        This directive controls the password used to authenticate with the logonserver.
#        It must be the same between the two configs. If it is not, your server will
#        not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
             RemotePassword = "ascent">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup
#
#    Teleport   
#        This directive controls anti-teleport hack checks will be enabled or not.
#        Default: 1
#
#    Speed
#        This directive controls anti-speed hack checks will be performed on player movement or not.
#        Default: 1
#
#    FallDamage
#        This directive controls anti-fall damage hack checks will be performed on player movement or not.
#        Default: 1
#
#    Flying
#        This directive controls whether flight hacks will be performed on players or not.
#        Default: 1
#
#    DisableOnGM
#        This directive controls hack checks will be disabled for GM's or not.
#        Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="0"
          Speed="0"
          FallDamage="0"
          Flight="0"
          DisableOnGM="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Period Setup
#
#    These are the periods that the server will wait before doing periodic duties. At the moment only
#    arena point calculation and honor point calculation are used here.
#
#    Default:
#         Arena: weekly
#         Honor: daily
#             (blizzlike values)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"
         ArenaUpdate="weekly">
         
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AscentStats Setup				*** PRIVACY NOTE: READ ME CAREFULLY ***
#
#    These are the values that the AscentStats client uses while communicating with an AscentStats server.
#    Statistics will be sent anonymously if a server guid is not set.
#    If you do not want your ascent client communicating with AscentStats servers, disable it here.
#    No personally-identifiable information is sent in these transmissions. The actual data sent is:-
#      stats=Ascent|PLATFORM|CONFIG|ARCH|REV|PLAYER|QUEUE|ALLIANCE|HORDE|AVGLAT|PEAK
#
#    If you don't mind your server transmitting this information, please leave AscentStats enabled. It
#    allows our developers to understand our users needs better and in the end provide you with a better
#    product.
#
#    Enable
#         To disable stat transmission completely, set this to 0.
#
#    ServerGUID
#         This is the GUID assigned to your server by the AscentStats server. To register your server, go
#         to http://www.example.com/ascentstats/register_server.php
#
#    ServerKey
#         This is the key used to secure stats sent by your server so they can't be forged. This key is
#         obtained after registering your server.
#
#    Default:
#         Enabled
#         Server Key "NONE"
#         Server GUID "NONE"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AscentStats Enable="1"
             ServerGUID="NONE"
             ServerKey="NONE">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channels Setup
#
#    These directives control some of the aspects in the channel system.
#
#    BannedChannels
#         If you would like to ban users from creating or joining a channel specify them here in a ';'
#         seperated list.
#         Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# VoiceChat Setup
#
#    These directives control some of the aspects in the voice chat system.
#
#    Enabled
#         If you want to enable the voice chat system, this must be set to 1.
#         Default: "0"
#
#    ServerIP
#         This is the IP of the voice chat server.
#         Default: "127.0.0.1"
#
#    ServerPort
#         This is the TCP port of the voice chat server.
#         Default: "3727"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"
           ServerIP="127.0.0.1"
           ServerPort="3727">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remote Console Setup
#
#    These directives control the remote administration console.
#
#    Enabled
#         If you want to enable the remote administration console, set this.
#         Default: 0
#
#    Host
#         This is the interface the RA server listens on.
#         Default: "0.0.0.0"
#
#    Port
#         This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
#         Default: 8092
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<RemoteConsole Enabled="0"
               Host="0.0.0.0"
               Port="8092">
      

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Scripting Engine Setup
#
#    Ascent can support multiple script backends via the means of loading .dll files for them.
#    This section in the config can enable/disable those backends.
#
#    LUA
#         If you would like to enable the LUA scripting backend, enable this.
#         Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ScriptBackends LUA="1"
                AS="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Movement Setup
#
#    NOTE: For any of these directives to function, movement compression has to be compiled into
#          the server.
#
#    FlushInterval
#        This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
#        If you have a high threshold, keeping this at 1-2 seconds will work better.
#        Default: 1000 (one second)
#
#    CompressionRate
#        This is the deflate compression rate. Higher will use more cpu, but smaller packets.
#        Range: 1-9 (or 0 is disable)
#        Default: 1
#
#    CompressionThreshold
#        This is the distance that will be used to determine if an object needs to be sent compressed or
#        normal. It is advised to keep it at least 30 units. This value is used for players.
#        Default: 30.0
#
#    CompressionThresholdCreatures
#        This is the distance that will be used to determine if an object needs to be sent compressed or
#        normal. This value is used for creatures, so it can be a lot lower.
#        Default: 10.0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Movement FlushInterval="1000"
          CompressRate="1"
          CompressThreshold="30.0"
          CompressThresholdCreatres="10.0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Localization Setup
#
#    LocaleBindings
#        This is a list of locale names and the other locale you want to associate with them.
#        For example, to make the European client always use the french language, "enGB=frFR"
#
#        Must be terminated by a space.
#
#        Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Localization LocaleBindings="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Moon PvPToken="1" PvPTokenID="29739" PvPKillAnnounce="1" DJ="0" Portals="0" StripperNPC="1" WarpNPC="1" MorphNPC="1" HealNPC="1" L70etc="1" VipAccount="1" MounterNPC="0" BuffNPC="1" CoinNPC="0" Max_SkillNPC="1">

Just To Say You Might Now Have This Right Here

<Moon PvPToken="1" PvPTokenID="29739" PvPKillAnnounce="1" DJ="0" Portals="0" StripperNPC="1" WarpNPC="1" MorphNPC="1" HealNPC="1" L70etc="1" VipAccount="1" MounterNPC="0" BuffNPC="1" CoinNPC="0" Max_SkillNPC="1">

But Thats Ok You Dont Really Need.

Step 3: Now You Will Need To Go Into ascent-logonserver.conf And Change The Following

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "127.0.0.1"
               Username = "username"
               Password = "pass"
               Name     = "world"
               Port     = "3306"
               Type     = "1">


# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
        ISHost = "0.0.0.0"
        RealmListPort = "3724"
        ServerPort = "8093">

# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

<LogLevel Screen = "0"
          File = "-1">

# Account Refresh Time
#
#    This controls on which time interval accounts gets 
#    refreshed. (In seconds)
#    Default = 100
#

<Rates AccountRefresh = "100">

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "7799"
        MaxBuild = "9999">

# WorldServer Setup
#
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#

<LogonServer RemotePassword = "ascent">

If It Does Not Look Like That Then Change It To That


Step 4: Now You Will Need To Go Here No-Ip Once There You Will need To Register Then Activate The Account. Once Done With That You Will Need To Create A New Host. Once At The Add Hosts Page You Will See This



Just Type In A Host Name And Choose A Domain. When Done With That Just Click Create Host.

Step 5: Now You Will Need To Go Into Start Then Into Run And Type This In

C:\Windows\System32\Drivers\Etc\

Then You Will Need To Open hosts With Notepad. You Will See This

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

127.0.0.1

Change It To This

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

127.0.0.1 Your DNS Your Just Made
Internal IP Your DNS Your Just Made
External IP Your DNS Your Just Made

Now In Order To Find Your External Ip Just Go Here My External IP And Copy That IP.

To Find Your Internal IP Go To Start Then Run And Type CMD. Run It Then A Black Screen Will Pop Up. In Their Type ipconfig. You Will See An IP The Internal Ip Is The One That Starts With 192.168.

Step 6: Now Here Is The Hardest Part. Here You Will Need To Know How To Access Your Router. Just Go Into Your Router And Open These Ports.

3724 - 3724
8085 - 8085
80 - 80
3306 - 3306
8129 - 8129
8093 - 8093
6112 - 6112
6881 - 6999
8050 - 8050
3036 - 3036

Make Them All Both TCP And UDP.

Here Is An Example Of My Ports With A Belkin Router.


Step 7: Now You Will Need Go Go Back Into Your Repack And Open Up ascent-realms.conf In Your Ascent Folder.

Now You Must Change The Following In red

#######################################################################
# Ascent Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################

/********************************************************************************
 * How to use this config file:                                                 *
 * Config files are in a block->variable->setting format.                       *
 * A < signifies the opening of a block, the block name is expected after that. * 
 * After the block name, a space and then the settings sperated by = / ' '.     *
 *                                                                              *
 * e.g.                                                                         *
 * <block setting="0" someval = "1">                                            *
 *                                                                              *
 * Comments can be in C format, e.g. /* some stuff */, with a // at the start   *
 * of the line, or in shell format (#).                                         *
 ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
#    Address:
#        The address (no port) of the server.
#
#    Port:
#        The port on which the logon server listens. (*** NOT 3724 ***)
#
#    Name:
#        Not really relavant, but name the logon.
#
#    RealmCount:
#        The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "Your DNS Your Created"
             Port = "8093"
             Name = "logon"
             RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
#    Name:
#        The name of the realm.
#    
#    Address:
#        The address (and port) of that realm.
#
#    Icon:
#        The type of realm (PVP, Normal, RPPVP, RP)
#
#    Colour:
#        Realm colour in realm list display.
#
#    TimeZone:
#        Time zone the realm is in.
#
#    Population:
#        (0 = low, 1 = medium, 2 = high)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "ServerName"
        Address = "External IP:8129"
        Icon = "PVP"
        Colour = "1"
        Population = "0"
        TimeZone = "1">

<Realm2 Name = "ServerName"
        Address = "127.0.0.1:8129"
        Icon = "PVP"
        Colour = "1"
        Population = "0"
        TimeZone = "1">

Now That You Are Done With That Can Start Your Server Up And Play Your Server But How Do You Get Your Friends To Make Accounts? Ill Show You.

Step 1: Just Download This Registration Site Account Creation Page The Pass Word Is ethernalq. Just Download That Then Extract It To Your DeskTop. Now Download Wamp 2.0 From here Wamp 2.0

Step 2: Now Start The Installation Of Wamp 2.0. While It Is Downloading Just Open Up The Website Folder. Now Go To Config.php And Open That Up With Notepad. You Will Need To Change The Following

<?php

$config['mysql_host'] = 'localhost'; //MySQL Host
$config['mysql_user'] = 'username'; //MySQL Username
$config['mysql_pass'] = 'password'; //MySQL Password
$config['mysql_dbname'] = 'database'; //Database Name

?>

Change That To Your Database Settings. Then You Put All Those Files Into Your Wamp\www\ Folder. Then Put Wamp Online And Go To Your Internet Address And Type http://yourdns Then Your Done!

Also You Will Need To Have A Database For MySQL So I Recommend Useing This HeidiSQL Its Very Easy To Use All You Will Need To So Is Run The Installation Then You Turn On MySQL.exe Then Your Done. To Edit Your Login Info You Will Need To Login And Lookup And You Will See 2 Little Heads With A Key On Top. Just Click That And Go To Edit Users Go To root@localhost And Change Root And the Password The Normal Info Would Be Root And Admin.

[fireflyyy]

mooi werk

[pooooo132]

I have belkin also but when i go to my external ip and i go to the forward ports place it looks different then yours so im not quite sure what i have to do...

[wcmfilms]

Whats is the MOTD and DB?

[Xtinction]

Whats is the MOTD and DB?

Your DB Is Your DataBase And The MOTD Is The Yellow Message That Appears To The Players When The Login.

[Oghoebe]

hey man i need help add me on msn yousif_oraha1(at)hotmail.com i keep getting this error SQL Error: Access denied for user 'root'@'localhost' to database 'information_schema' and i cant connect to World of Warcraft ive set my realmlist to my host wowuncut.servegame.com but when i try to log in it says unable to connect plz help me what do i do and i cant pm u its so annoying!

[coopa]

My arcemu-world.exe tries to authenticate my new DNS but times out. It means I guess that it connects fine, but for some reason can't authenticate it. So its probably just a minor and obvious problem I can't quite think of. -.-

Any ideas?

EDIT:
Nevermind I fixed it.

Had to change the allowedIPs in the logonserver.config.

+2 rep bro, nice work.

[Black Gull]

I can't login, it says that there's not such an username, and I'm sure I done this right

[Pengythesahj]

what do other people type in the address bar to get to the registration page?

[dvann]

hamachi works very well with age of empires it has helped me with several lan parties.

[thegame240]

i have got a dynamic external IP and if i dont put it in the host file what will be happend ?

[ArciX^]

Nice guide man. Keep up the good work!

[richdude212]

Ok i was all ways told to select wildcard but to use that on this site i will need to pay so is it ok to not select wild card?

[DeNeD]

Whats my Db name its realmd (i use mangos ) or the name i used at the connection ?

[CimSlunt]

Very nice, and it works, all the others i have tried have had no success with. Altho i had my own .gif image made hoping i could use that on the site, is they a way to change the logo??